Resume - Checkout, Startup Commissioning I&C

Misco Jobs

Resume #65285

CONTACT INFORMATION:
View contact information...

Experience

2006 – 2007/present

Fagen Incorperated Granite Falls Mn.

Commisioning Engineer

Fagen Inc. is the largest builder of Ethanol plants in the U.S. As Commissioning engineer I have started up several new ethanol plants of various sizes from 40 MGY to 100MGY. Responsibilities included plant DCS system checkout and commissioning. DCS systems are Siemens APACS running Wonderware software. Also included mechanical and electrical equipment checkout, grain elevator equipment and hammer mills checkout, instrumentation calibration, cooling tower systems commissioning. Also responsible for establishing construction priorities for plant completion and maintaining established target date milestones.

2004 to 2006
Cal Energy, a MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants located in the Imperial Valley, Ca. Supported Foxboro I/A DCS running on Sun Unix platforms, Emerson Delta V DCS running on Microsoft NT4 operating systems. Also supported Woodward, Triconix, and Mitsubishi governor control systems and Bently Nevada temperature and vibration monitoring systems. Responsibilities included DCS repair, maintenance, data backups and programming, PLC trouble shooting and repair, maintenance and configuration of RTX plant data logging systems and well field SCADA systems. Using all the above systems along with Hathaway event data collection systems I was responsible for identifying causes of turbine trips and supplying supporting data and documentation. Implemented new Druck calibration system including instrument database configuration for all 13 units. Commissioned new Delta V DCS system expansion on Unit 4. Maintenance on FieldBus and Hart instrumentation.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC control system engineer
All aspects of commercial HVAC control system engineering and design from bid preparation to submittal including hardware specification. Including control system logic programming and graphic screen configuration of Delta Control DDC, BacNet, building control software. Computer screen design using Delta Control Orca View software. Control system logic design for chillers, boilers, air handlers, cooling towers and pumping systems. Supervised field network installation and performed system checkout and startup of the control system.

1998 to 2001
Systemation, Fairport N.Y.
Systems Integrator, engineering technician
Formed applied services division of Systemation with another individual. Focus was system integration for municipal water and waste water treatment plants. Systems used Modicon PLC's, Opto22 I/O and Citec software running on Microsoft NT4 server/operating systems. Services included panel design and fabrication, installation, configuration, calibration, start up and commissioning of systems. Provided factory trained field service for the sales division of Systemation on Foxboro instrumentation.
1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
President, founder and primary business manager.
Manufacturer's representative for several major lines of instrumentation. Provided repair, calibration, maintenance, installation and start up of instrumentation and control systems in New York and Pennsylvania with additional customers scattered from New England to North Carolina. Provided technicians for plant shutdowns and outages. Primary customers were water and waste water treatment plants, paper mills, food processing plants, hardwood lumber drying operations, and various other applications. My involvement included general business management, sales, system design, supervision installation, start up and calibration of instrumentation.

1978 to 1985
The Foxboro Co., Buffalo N.Y.
Field Service Representative, Sr. Field Service Representative, Systems Analyst
Provided field services for entire Foxboro product line. Supervised installation and calibration of instruments. Specialized in power system and boiler control system start up and commissioning for utility and industrial applications. Hardware experience included Foxboro DCS systems, electronic and pneumatic process control instrumentation and systems, and analytical instrumentation. Application experience includes Water and Waste Water, Paper and Pulp, Chemical, Food and Dairy, Refineries, Foundries, Steel works, and many other various applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.

Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2551)

Go to Search Parameters...

Brief Description

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

With my solid background, in both finance and systems I am well positioned to address and implement systems control for all data maintainance. Having a proper understanding in the transfer of information of sub to general-ledger, using JDEdwards, I have the ability to extract and design reports.

Dynamic, creative, and results-driven Materials Management Professional with a total over 18 years of experience.

Site manager, mechanical engineer, construction manager

Contract Administration, Cost Control, Project Control, Budget, Bid Qualification, RFP Preparation, Bid Evaluation, Pre-Qualification, Pre and Post Award, Insurance Qualification

Wide and varied technical experience in Engineering Project control services combined with excellent personal, customer facing and communication skills. Currently a member of the Project Control team responsible for the Planning / Scheduling, reporting, forecasting, and analyzing and recommendation

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

Results-driven business/systems analyst with 10 years of diversified experience in the successful identification and management of high-level business development strategies and large-scale IT solutions with extensive expertise in developing critical design requirements and functional specifications

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

Operations, Purchasing, and Sales Manager

Experienced professional in Accounting

Dear Sirs, i want to find any job possibilities with your company

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

Over Two years of experience in Petroleum Refining & Downstream process, and Chemicals in the Field of Continuous Process plant Operations as a Asst. Manager and Shift Feild Engineer, Troubleshooting of process and equipments handling, vendors co-coordinating, and Commissioning and Trunaround Exp.

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

Checkout, Startup Commissioning I&C

23 Years of Various field of accounting

Director

working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

MSc Engineering / Business Development / Project Management /Energy fielsd

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out