Resume - Overall manager for M&E services on a large high school, including 2 boiler hous...

Misco Jobs

Resume #65619

CONTACT INFORMATION:
View contact information...

Objective
To work in an enviroment where my skills are used to the best advantage for myself and my employer

Employment History
Site Manager
Taylor Electrical, Beccels Sufolk. England.
Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.
Responsible for Health & Safty programme, all employees on site, interpreting drawings and material take offs,sourcing and purchaseing of materials,sub-contract labour and services,planing the work schedule,liasing with the client, the school facilities manager,and internally within the company.Ensure the contract is run proffessionally, efficiently, and within budget.

General Forman
H&S Engineering, Kings Lynn, Norfolk, England
General forman at the British Suger plant, Wissington, Norfolk, on the evaporator vessels replacement and refurbishment, complete with new pipework and controls, rangeing in size from 1 inch to 30 inch in carbon steel and stainless steel.
Responsible for Health & Safty, accurate interpretation of PI&D and iso drawings, accurate physical measurements, take off and ordering of materials, economical use of labour, quality control, Hydro and pneumatic testing of pipework, keeping clear records of all testing proceedures and results,keeping thr contract on programme.

Pipefitter
Fabricom, Immingham, Lincolnshire, England.
Pipefitter on joint venture between B.P. and British Sugar on a new Biofuel plant at Wissington Norfolk. Required to layout, assemble, and fabricate pipeing systems carrying water, steam, chemicles, bio-fuels, and other process pipework associated with a new plant construction. Read and interperate drawings and specifications. Measure, cut, thread, and bend pipes as required. Tack-weld, braze, or bolt up pipework and fittings. Test completed sections as per specifications.

Pipefitter
Industribasen.no.Lervick, Stord, Norway.
Pipefitter on the Hydro testing crew of a north sea platform module, removing valves, control modules useing block and tackles, strops, chains, and other lifting equiptment. Bolt on blank flanges and testing gaskets to all and every open end. Testing with water up to the required pressure. Keeping records of all testing proceedures and results. Re-instate the pipework with all valves ect.,bolting up to the required specification for bolts, studs, nuts, gaskets, and torque. Working in a safe manner, but always within the companys health and safety policy.

Forman pipefitter
Sotham Engineering, Norwich,Norfolk.
Forman pipefitter on new shopping mall, with responsibility for health and safety, accurate intrpretation of drawings and specifications, economical use of labour,material requirements and ordering, and quality control. Liasing with other trades for pipe runs and fixtures, including, time-saver cast iron drainage, copper, carbon steel and P.V.C. pipework. Mains water pumping system with break tanks and backflow preventers. Soldered, brazed, welded, flanged and bolted, and glued joints.

Pipefitter
Flint Energy Services Ltd..700.300-5* AvenueS.W. Calgary, Alberta. Canada.
Pipefitter working on the Hydro and Pneumatics testing crew of the Steam Assisted
Gas Drilling silo on the Long Lake Oil Sands Project. Preparing pipework and valves on steam and product lines at wellheads for hydraulic testing with water, Test pipework to the required pressure, cure any leaks, have test witnessed by Q.C., re-instate pipework, fittings and valves useing the specifieid gaskets, nuts and bolts. Tighten any untested joints to the specified torque and sign.Pneumatic testing of air lines to valves. Due to the dangers of high pressure water and air used in the testing, a strict health and safty code and risk assesment plan was adhered to at all times.
Also Weld mapping and Test pack co-ordinating of the same project

Instrument Pipefitter.
Wormould Tyco, Norwich Norfolk.
Instrument pipefitter on sub-sea modules for a project off the Brazilian coast.,bending forming and fitting stainless steel small bore pipework from 6mm up to 50mm. Fabricating brackets and fixings, drilling, tapping and welding. Hydro and pneumatic testing of completed modules.

Pipefitter
Middieton Elliot Moore, Wallsend, Tyne & Wear. U.K.
Pipefitter working at Amens boatyard Vlessingen. Holland on a new build 40 Eoro yatch. Mainly in the engine room, with particular responsibility for the high pressure air and oil lines.
Pipefitter
Pruce Newman Pipework Wymondham, Norfolk.
Pipefitter on Hot and chilled water pipework of a air conditioning system to a large office project in Norwich,

Instrument pipefitter
Lamb Technicon,Mildenhall, Suffolk.
Instrument pipefitter, using stainless steel, carbon steel and aluminium,ranging in size from 4mm to 52mm, on machinery for the automotive and chemical industries.
Foreman
Dixel Ltd.,Glandford, Norfolk.
Foreman fitter with responsibility for the inspection and remidial works required to bring the Anglia Water Sewerage plants, fresh and foul water pumping stations, and other Anglia Water compounds up to By-Law 2000 standards.Management and economical use of labour,health and safty,with particular attention to a whole range of infections possible on sewerage farms. Method statements and risk assesments.Materials requirement and ordering.Quality control, ensuring contracts were completed within budget..
Education

Stockwood High School, Cutenhoe Road. Luton, Beds..
Gained Eleven C.S.E. including, English, Maths. Science, Building drawing
Plumbing ;History,Geogrphy,ect.
Luton College of Technology, Park Square, Luton, Beds...
Gained City and Guilds. Basic Craft, Advanced Craft with Credit and Technicians
Part One and Two,ONC certificate
Was also awarded the best apprentice of the third vear 1971. and best apprentice of the year in 1972

Other Experience

In my 37 year carear I have worked on most types of projects, including several times at Bacton North Sea Gas Terminal, the last time on the interconnector pipeline and plant.Several oil production platforms, for the North Sea and Brazil. Oil refinary and storage depots.I spent two years at Rhone Pollenc agri- chem plant on maintainance and new projects, including vessel placements, glass, plastic, and cement lined vessels and pipes and nucleaonic wiegh cells. I have also worked on Neuclear, gas, and chicken waste power stations. I have also worked in the Alberta oil fields.I have worked with most if not all of the materials used in the pipefitting trade today, and in most situations.
I believe myself to be just as happy being part of a team, or leading a team.I feel i am open to suggestions from wherever they come on best work practices, health and safty, and problem solving, although i feel i am well able to solve most problems.
I did take a CSTS and WHIMS test on my last visit to Canada,but this was in May-June of 2006, so i dont know if they are still valid.
I do have a U.K. CSCS certificate, also a appointed person in the workplace First Aid certificate. I also have a motorised platform and boom licence.
I would very much like to return to Canada, with the view to emmigrate.

Refenences
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2282)

Go to Search Parameters...

Brief Description

Passionate, experienced and Qualified. Development and implementation of safety management systems. Skilled investigator with anlytical skills to achieve preventative outcomes. Behavoural management specialist with a hands on approach and background.

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Sr. Project Controls Specialist

Chem. Eng from U.D USA. Worked overseas, in plant star up, commisioning, debotlenecking, in all on surface areas of the oil and gas industry. Exposure to Asset Management, Process and Production, Technical and Economical Project Evaluation, HSE and ISO's, Instructor and mentor of new engineers

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

Techno - commercial Professional, Service Planner with 4+ years of experience in Oilfield Services, Currently working with Leading Multi national Service company.

Night Drilling Supervisor

Production Manager, Process Engineer, Project Engineer, Metallurgist

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

34 years in instrumentation industry.

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Bachelor of Chemical Engineering and Bachelor of Geology degrees, over 10 years field experience in the oil /gas industry around the world. Worked offshore and onshore. Valid IADC Supervisors Wellcap certificate. Vaild OPITO offshore card.

Hazardous waste management,remediation, monitoring, modeling, pollution control, risk assessment, air toxics, regulations, project management

I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

With my solid background, in both finance and systems I am well positioned to address and implement systems control for all data maintainance. Having a proper understanding in the transfer of information of sub to general-ledger, using JDEdwards, I have the ability to extract and design reports.

Aconex system user for Management on Line in Dubai Metro Project, 2. Health & Safety Environment (HSE Management), 3. Construction Management, 4. Computer software (Microsoft office& AutoCAD).

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

Results-driven business/systems analyst with 10 years of diversified experience in the successful identification and management of high-level business development strategies and large-scale IT solutions with extensive expertise in developing critical design requirements and functional specifications

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHIRODON CONSTRUCTION OVERSEAS CO.S.A IN DOHA -QATAR ON THE VISITING BASIS AND ASSIGNED AS PROJECT INCHARGE FOR THEIR ON GOING QATOFIN MARINE PROJECT DOHA-STATE OF QATAR.

Dear Sirs, i want to find any job possibilities with your company

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete

Comfortable to work as Research Executive, System Analyst, Training Coordinator, Admin Officer

I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

Procurement / Logistic Supply Chain Consultant

Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.

I have vast experience in pipeline inspection involving smart pig, pipeline cleaning, coating. Also, i have experiences in commisioning/decommisioning of pipelines and other engineering maintenance activities relating to static equipment. I am very conversant with Microsoft office and HSE standards.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Seeking Managerial or Supervisory position in Logistics & Transportation.

Checkout, Startup Commissioning I&C

Bachelor in Engg. working As Quality Assurance Engg In A korean MNC for Mobile manufacturing having 3 year experiance, ISO, Six Sigma, SPC, Training, MIS, Quality Operation

An Electrical Engineer with over 17 years of versatile experience in the field of Proposals, Contract Management/ Co-ordination, Marketing with sufficient exposure to ISO 9001 quality standards and Total Quality Management. Have undergone skill enhancement courses at IIT & IIM.

Achievement & result oriented with excellent communication, presentation & Interpersonal Skills.

49CFR HAZMAT Technical Trans (D.OT., ADR, RID, IATA, IMDG); HAZCOM (1910.1200)

23 Years of Various field of accounting

Director

working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.

„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out