Resume - OVER 10 YEARS EXPERIENCE SERVICING THE OIL & GAS INDUSTRY INCLUDING BUT NOT LIMI...

Misco Jobs

Resume #68223

CONTACT INFORMATION:
View contact information...

Sex: Male

Age: 42 Years

Nationality: Australian- Current Passport

Date of Birth: October 23rd, 1965

Drivers License: Australian and Indonesian

Marital Status: Married two Children

QUALIFICATIONS

* NSW High School Certificate
* Fitting and Machinist Tradesman
* Restricted Electrical Qualification
* Qualified Trainer (Employers Federation of NSW)

EXPERIENCE & WORKING KNOWLEDGE
-PIPE FABRICATION & ERECTION.
-INSTALLATION OF ROTATING EQUIPMENT (VESSELS, PUMPS ETC)
-PROJECT CO ORDINATION AND MANAGEMENT.
-VESSEL AND TANK MANUFACTURE.
-RIG SERVICES (MECHANICAL, PIPING, STRUCTUAL ETC).
-PROCUREMENT AND LOGISTICS.
-MANAGEMENT OF SUB CONTACTORS AND SUPPLIERS INCLUDING SUPPLY AND FORWARD PURCHASING AGREEMENTS.
-MECHANICAL MAINTAINENCE, SERVICE AND REPAIRS.
-PRODUCTION ANALYSIS AND IMPROVEMENT (MANUFACTURING).
-PLATFORM UPGRADES, EXTENSIONS AND MANUFACTURE.
Note: - Mining experience is excluded from this section for clarity.

PRODUCTION SERVICE NETWORK
REHABILITATION PROJECT GUPCO / BP Ras Shukheir Egypt

June 2007 until Nov 2007: Fabrication Workshop Manager

Employed as fab shop manager initially to cover pre fabrication of pipe spooling and minor structural works. Above this covering material management and aspects of piping production and installation on and offshore.

PT H&H UTAMA INTERNATIONAL Balikpapan, Indonesia

Feb 1997 until May 2007: Deputy General Manager

Starting as a mechanical superintendent involved in a wide range of fabrication, and mechanical installation projects. Advancing to machine shop manager, and onto current position as deputy general manager. This has seen me involved in all facets of the business from commercial tender stage through to completion and or load out. The work has been wide and varied with a heavy emphasis on services to the oil & gas industry. These include but are not limited to the following: -Sub contactor selection, control and agreements supplier forward purchasing agreements and appraisal. Deck extensions, Manufacture and load out of several platforms up 500 T, Manufacture of sub sea pipe supports, SBM overhauls, Oil rig mud piping upgrades, Shop pipe spooling and installation on existing and new facilities including static and rotating equipment, Mechanical refurbishment of valves, BOP'S, Diverters, Risers, Mud pumps, Jacking gear units etc etc. TTS manufacture and load out, Offshore basket manufacture, Bulk storage tank manufacture and erection. Overseeing procurement on an on time on budget basis.

FLENDER SERVICES Australia

Mar 1992 – Feb 1997: Service Engineer

Duties include providing technical support to end users of Flender mechanical power transmission equipment throughout Australia, New Zealand and South East Asia. Supervising the refurbishment of gear units and couplings in customer's workshops as well as the day to day work in our own workshop. The installation and commissioning of the equipment in accordance with specified requirements. Other duties include the overseeing and ordering of machining and fabrication works by sub contractors.
The sale, correct ordering and importation from our parent company in Germany of gear units, spare parts and couplings. The training of Engineers and maintenance personnel in the correct operation, maintenance and repair procedures of Flender equipment.

GULLICK AUSTRALIA

Sep 1989 – Feb 1992: MECHANICAL CONTRACTOR

Responsible to the Engineering team for the overhaul and repair of Longwall mining equipment (roof supports, armoured face conveyors, hydraulic pumps and associated equipment).

Jun 1986 – Jul 1989: MECHANICAL FITTER

During this period I worked for several companies on short term construction contracts and shutdowns. Companies included Eglo, Kirbys, Hellman Eng, and Comalco.

BAKER & PROVAN

Jan 1981 – May 1986: FITTING AND MACHINING APPRENTICESHIP

Completed a Fitting and Machining Apprenticeship. Duties included the operation of Lathes, Mills, and Surface Grinders etc. Completed the Apprenticeship course at Penrith Technical College.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 2267)

Go to Search Parameters...

Brief Description

•10 Years of Experience as Maintenance and Reliability Engineer •Certified Reliability Engineer by ASQ •Certified in NDT by the ASTM •Taught more than 20 courses associated to maintenance and reliability methodologies, training over 300 professionals. •ASQ Member •ASME Member

Have a working experience of 15 years in the Financial Sector and worked in good financial institutions such as Citibank, Credit Agricole, Bear Stearns and MashreqBank. I am a Certified Internal Auditor and a Certified Fraud Examiner.

Division Director / Business Development / Oil & Gas Industry

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

6 years experience to work with large data base, to consolidate the information in useful reports necessary to Group Procurement for the activities of scheduling; management of suppliers and their performances, strategic sources

Internationally experienced purchasing manager with experience managing an office that supports multiple sites. Experience with exporting goods to most countries in South America. Excellent people skills.

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Professional Project Manager, PMP certification, More than 15 years of domestic and international oil & gas industry experience

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.

Automation and control engineer

20 year Army Veteran with Fleet Management, Logistics, supply and accountability experience.

Project Enginneering/Management; Facilities Engineering/Management; Engineering Management

I have master degree in architectural engennering, good experiences in construction and architecture designe, I have realized industeriel and reidentiel projects and I have good computer background

As Chief engineer I was a ship’s technical manager and was responsible for the operation and upkeep of all machinery, engineering systems and the structural integrity of the ship.

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Extensive experience in managing E, H & S programs in South America, Mexico & the United States that resulted in contributing to eliminating serious worker injuries that resulted in effectly established a safe environment. Worked effectively with OSHA CFR 1910 & 1926, EH & S Compliance, NFPA Codes.

Internal Auditor with 3 years experience

Senior HSE Manager

Aviation Professional

Proven oil and gas manager

I have over twenty-five (25) years of experience in the petroleum (upstream - field), quality assurance, program / project management, purchasing / supplier quality, engineering, safety, manufacturing, supervisory (hourly / salary and union / non-union), and management capacities.

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

Dear Sir, Since I am looking for an interesting job opportunity in line with the job recruitment that you have recently started, I have the pleasure to submit my Curriculum Vitae for your review. For the future I would like to work in a well-organized company in a position of planner engineer.

Well Operations Manager / Superintendent

SAP HR Implementation, Recruitment, Training, Compensation Management, employee Relation, Performance management

A professional electrical engineer; more than eight years of active experience in electricity sector of Pakistan in controls, protection, SCADA. BSc Elect. Engg.; MSc Controls; MBA. Has also worked in Northern Electric plc, UK. Technically competent; has ability for business and financial analysis.

12 yrs exp in Chemical Industry . strong academic background B.E. Chem +ICWA+LLB+MM (AIM, Philippines) seeking for a suitable opening

A highly skilled and very experienced Supply Chain Professional with over 15 year’s expertise in Procurement, Logistics and Materials Control in Europe and mainly overseas. Acclimatised to work with varying cultures in diverse countries world wide.

OVER 10 YEARS EXPERIENCE SERVICING THE OIL & GAS INDUSTRY INCLUDING BUT NOT LIMITED TO FABRICATION jackets, platforms, buoys, OFFSHORE SERVICES piping, structual repairs and upgrades, shutdowns, MECHANICAL overhauls, machining, GENERAL OILFIELD CONSTRUCTION AND SERVICES

I am a hard working individual, strive for excellency and never regret employing

Implementation Manager or Technical Project Manager

Wide experience in oil/gas exploration [offshore, land, in-house, in-field/ onboard], mostly geophysical/client comm. INTERESTED: Challenging posts with responsibility, utilising current skills, presenting opportunities to build new.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Operations and Engineering Manager with 19 years experience with an oil major. Work experience in Middle East, Azerbaijan and UK. Process engineering background with chartered status.

Chartered Safety and Health Practitioner (CMIOSH) working lately as High Risk HSE Consultant in the Oil and Gas Industry

Field Manager/ Operations Supt. with experience managing international oil/gas projects.

Senior Cased Hole Wireline Engineer

Currently working with M.S. Al-Suwaidi Industrial Services Co. Ltd. as Project/Mechanical Engineer for the construction of HDPE Plant owned by Yanbu National Petrochemical Company, Yanbu Al-Bahr, Kingdom of Saudi Arabia

Have more than fifteen (15) years of professional associations with ENAR Petrotech Services (Private) Limited (EPSL) and gained experience in the Project Management and Detailed Engineering Design.

Deepwater Completion engineer

SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.

Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.

Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.

HR Generalist with 14 years of experience

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out