CONTACT INFORMATION:

2005 – till present running my own business (Restoration of stained-glass and supply support and advice for Oil & Gas projects
Working on projects for various E&P Companies and Contractors,
Total E&P Yemen as Construction Superintendent
At the North Sea and onshore as an (Ops./Instr./Elec./Inspect/Mech-Engineer/OIM/Client-Rep/RPS)representing Total for execution and advice on Projects, Simops operations Safety, Hook-ups and Commissioning of new platforms (Focus Oil&Gas), Transition from Carrier to Pipe layer "Audacia" (Allseas), Drilling, Production, Well-Testing (Total), Risk-Assessment and Work-Overs(Total). Radiation safety Rep. for Vermilion Oil&Gas (Six-year survey). For Total E&P Angola on Drill-ships (Pride-Africa&Angola) and on the Semi-Submersible (M.G.HULME) at the" Dahlia-Project" and at Site in Soyo Angola for Methods Technical-Safety Department for benchmarking, and also performed Rig inspection on two Land-Rig (KB700/IDECO350).
2002 – 2005
For Fabricom Oil &Gas (Super-Intendent) with-in Total E & P Netherlands acting as an OIM, Production/Company-Rep./RPS/PIC to Manage/Supervise/Control/Review/Advice/Plan in Liaison with all Disciplines and Parties on a daily base.
On Simultaneous Operations (SIMOPS) Maintenance, Emergency-Control, Safety, Drilling, LSA Control & Awareness, Site-Survey's for Production, Projects, Work-Over's (Slick/E-line/Coil-Tubing/Rig and Rig less), performed Major Plant and Process modifications, also writing and executing Work & NORM programs including JRA's on Tie-Ins, Pipelines(ridged and conflex) repairs, Commissioned/Witnessed for DNV and or Client: on Structural, Piping, Control System's(PSC/DCS/PSS/(HIPS "First approval on electronic system")/F&G),
(Pressure/Leak/Load/Acceptance/Function-Testing), and had the opportunity to perform an (Bracing Repair by Cofferdam method) Rig less, and also acted as a Mentor providing support and knowledge to Total E&P contracted Satellite-Intervention & Maintenance-Teams.(Disciplines E/I/M/Op/Cr).
1993 – 2002
For M.O.S./Maintec-Project-Services acting as a Lead Process-Engineer on ENI's/Lasmo's Gasproductionplatform Markham J6-A. Responsible for the daily J6-A gas and condensate production, including the three satellite platforms and Sub Sea wells. Acting as OIM/Production-Rep. on Simultaneous Operations, Drilling, Production, Projects, and Work-Overs. Strongly involved in daily safety, maintenance, planning, PTW system, Work-programs, Lifting Plans, (re)engineering (at site) E/I/O/M, and participated in Adverse Weather Policies(Dutch/UK legislations), also represent Lasmo at the first "Tripod" (safety benchmarking North-Sea) NOGEPA wise, and was involved in creating the Ops manual, Safety Case, environmental plan and in the certifying process qualifying for ISO 9001 & ISO 14000 and in gaining for a Operating-license for the Norwegian Government.
1991 – 1993
For A Hak Offshore as Material Coordinator responsible and accountable for buying/rentals/certificates logistics/custom's clearing and coordination of all material's and equipment for On- & Offshore projects, keeping the registers update for (Platforms, Satellites, Compressor Stations, Receiving facilities, Mix stations, and as Mechanical-Electrical Engineer on several On & Offshore locations perform trouble shooting on Temporary power and air-supply, cranes, welding and preheat treating equipment)
1988 – 1991
For A Hak Offshore on several platforms performing Plant-modifications, Six-year surveys, Hook-up major structural modifications as a Mechanic, Materials Coordinator and as an Electrical/Mechanical Engineer responsible for the power-generation of the Gas treating centres.
1986 – 1988
For A Hak Pipeline as a Mechanic/Electrical engineer responsible pilot-valve, leak, and pressure testing and Debottlenecking/Dewatering of the incoming pipelines and receiving-facilities for the Gasunie and responsible for the maintenance of the rotating equipment at the Gas De-sulphuring-Plant (NAM) in Emmen, and for checking the equipment of the Contractors.
Summary per discipline:
E & I. DCS and Fire and Gas systems like ABB, Modicon, Triconex, Foxboro, Delta-V, Invensys, various PLC's with all the ins & outs, Commissioning and Flawless Start-ups, MCC Modifications, Revamping, Implementing Crew finder & PLB system, Transition from Pneumatic to Electronic, fault searching in complex systems, as well as repairing and maintaining UPS, welding machines manipulators, machining & production tools portal cranes civil installations. Supervise and Tutor newbie's
.
Mechanically Maintain repair and revamping of various Diesel/Gas/Petrol Engines Brands:(RR/Cat/VBV/Scania
/Daf/Mercedes/Deutz/Hatz/Lombardini/Jamaha/Johnson/Mercruiser/GM/VolvoPenta/AmstrongSiddenly/Perkins/Cummings/Ford Mermaid) and. Hydraulic and Wire Crane's and Diggers, Side-booms, Air-Compressors/Dryers, Shovels, Generators, Dozers, Snow-Cats D3 to D6, Pipe-Benders, Geho-pumps, Welding-Diesels In and Outside Pipe-Clamps, Jacks and Winches, High and Low pressure pumps up to 3500 bar, All types of Valves from 1/2 to 36 inch, Submersible Pumps, Gas-Compressors (Nuovo Pignone, Siemens), Power generation, Turbines (Angstrom, Kongsberg, Dresser, General Electric), Pump's al type's, N2-Skits, Instrument/Work-air systems, Hypo-chlorite and Reverse Osmoses Skits, building Hydro/Vibration/Power/-Packs, Hydro, Helium. Leak and Pressure Testing of Installations and pipelines, rigging plans, as well as Supervising and of Contractors.
Operationally Supervising Hook-up's, work-over by means of slick/wire line and Coil-tubing, executing Well-testing and Well-Completions programs and trouble-shooting on well problems and prod. tubing, casing, packer, Gauges flow conditioners or DHSV exchange, performed major modifications on Gas-production-platforms like (Compression, Meoh recovery, WHRU, LQ extensions), connecting and repairs of Pipelines (Ridged & Flexible) and Dune crossings, Treating Centre's, Offshore as well Onshore, Commissioning systems as Compression, Meoh-Recovery and Training, implementing divers new facility's, writing and executing Flawless Start-Up programs, also was I involved in Hydrate-Prevention Plans, Hazop Study's, Adverse Weather Policies, Implementing PLB system, Strongly involved in Risk Inventory and assessment, writing laboratory programs and training, ISO 9001, ISO 14000, Waste Management, implementing Gas-Contracts, LSA Work-Program's, Shutdown-Program's, writing Job-Instruction as well as Job Task Risk Assessments for all disciplines. Reporting/Planning by means of divers computer programs like, Amos-D&(W), Elise, PI, Primavera, MS project, Sap, cc-mail, Lotus notes, Word, Access, Excel, Lotus 123, Monte-Carlo and various Corporate Management Systems.
Summery Projects Laying Pipelines on Land, River/Canal/Road and Coastal/Dune crossings. (In various grades steel/plastics for Water, Gas, Oil, and Chemicals, in various size up to 56 Inch). Installing Freefall Life-boat frames, process utilities and upgrade's like water-separators and structural extensions on Nam, Amoco and Total platforms, Hook-ups/Revamping and Flow/Pipe-line connections(Placid Oil). Flawless Start-ups and (De) Commissioning of Platforms and pipeline's (P15 Amoco). Drilling or Work-over on Wells on (total)K5ENC HZ 8km /K4BE HZ 7km /K5B prod-tubing exchange /J6A(Lasmo/ENI) 5 wells/ST-1 5 wells/Windermere 2 wells/K4ad sub-sea(Total) K1A 4 wells (Rig stuck with leg in soil for 6 month)/L7H sand lift..
Course / Training Attended during the last 10 years:
Dangerous Goods Management (IATA, IMO),
Vibration-monitoring & Analyses (Bentley-Nevada),
Maintenance Gas-Turbines GE-LM1600 (Thomassen/General-Electric/CCC/Woodward Motor-Management),
Compressor Course (Thomassen-GE),
Crane-driver Offshore Stage-3 (OPITO),
Gas-Measurement (OPITO),
NEN-1010(VEV)/3140/Nen-3410/50110-1/60079-17(Explosion-Safety)
Self-Assessment Course (Schouten & Nelissen)
OIM RSE emergency Control Certificate (STC)
IAEA/EPA Member regarding Decomm.
Prof-member AAAS and Member of the American Society of Chemical Engineers
And studying for the NEBOSH National Diploma.(Grad IOSH MIIRSM)
Delta-V and Invensys Foxboro DCS-systems.
VVA1 (PBNA/DNV) and VOL-VCA (Safety),
Fire Controller/Emergency Management (Brand-Consult)
Fire & Rescue Team-Leader/Member (MTC)
Radiation-Hygiene/Control (ECN)
Coxswain/Member Freefall& Common Lifeboats (MTC)
Helicopter Underwater Disorientation & Escape training (RUTH)
Survival at Sea (DHTC)
Helicopter Landing Officer,(KLM)
Marcom-B
Man-Overboard/FRC Team-Leader/Member(DOTC&MTC)
FRC/MOB- Crew-Finder/Member
Academic Qualifications (copies attached to CV's):
Diploma Level-5b Radiation Open Sources (TU-Delft)
|