Resume - I am skilled in providing/developing HSE advice, HSE policies, accident/incident...

Misco Jobs

Resume #69168

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS/ EXPERIENCE:
I am a holder of B.Sc degree in geology after obtaining credit passes in my secondary school education.
For the past six years I have pursued an increasingly successful management career where continuous process improvement and performance have been the norm. My team role is one of energizer and leader, bringing strategic planning and can-do attitude towards current goals and future growth as is reflected in the attached curriculum vitae.
My work over the years have given me ample opportunity to garner knowledge of the Nigerian safety and labour laws, industry safety standards and legislation amongst other environmental policies that enhance safety.
My knowledge has included but not limited to providing expert HSE advice, developing and implementing Health and Safety policies, investigating incidents, conducting appropriate Health and Safety training including fire training, developing Risk Assessments, developing emergency response procedures as well as evacuation procedures.
The training conducted in my current organization of which I am a facilitator and presenter, is done with well developed modules presented with visual aids. As a trained facilitator, I will execute my duties of coaching clients site representative and the contractors HSE organization to implement safety and health programs and advising the site teams and contractor of the clients HSE requirements, expectations and best practices with great effectiveness and efficiency.
I have obtained HSE certifications with the Nigerian Institute of Safety Proffessionals (NISP) and most recently the National NEBOSH Certification award of which I obtained considerable training and took and passed the proffessional examination.

OBJECTIVE:
------------
To ensure that the organization's HSE objectives are met while doing my best to ensure a zero Lost Time Injury. Additionally, I like to work in an organization where hard work is appreciated.

WORK EXPERIENCE:
------------
Date - 2002 – Date
Organization - STEP NIGERIA
Location- Eket, Akwa Ibom State
Position- SAFETY OFFICER
Duties
Develop SHE plans, drive and monitor implementation of such plans,
Define minimum SHE competence levels and training requirements for staff
Organization of SHE meetings, fire drills, emergency response and evacuation, and safety inspection & audits
Facilitate the investigation of near misses and incidents including reporting and follow-up
Monitor compliance to SHE statutory requirements
Ensure safe work practices are followed during construction activities, including use of appropriate site SHE tools e.g. PTW, JHA, Tool Box etc.
Drive EMP Implementation

Date - 1999-2002
Organization - Jodeed Integral Services
Location - Eket, Akwa Ibom State
Position - SAFETY OFFICER
Ensure SHE procedures and policy are implemented and adhered to strictly
Raise environmental awareness of local communities and evaluate sub-contractors SHE performance.
Conduct routine SHE presentation, investigate and analyze accident statistics and recommend necessary corrective measures.
Geological mapping, Bore-hole Drilling, Casing, Well Development and Pump Installations

Date - 1998 - 1999
Primary Organization - Western Atlas Geophysical
Secondary Organization (on service contract) - Shell Petroleum Development Company, Port Harcourt, Rivers State
Location - Port Harcourt, Rivers State
Position - Geologist (N.Y.S.C)
Duties
Seismic Data Acquisition and Interpretation
Performs risk analysis, control and management
Lend support in coordinating safety meetings
Ensure implementation and follow-up on recommendations from hazard identification, risk assessment and safety audit
Prepare safety modules for presentation at safety meetings
Organize swimming test and monitor certification of crew-members.

------------

EDUCATION & CERTIFICATION:
------------

DEGREE/CERTIFICATION - National NEBOSH Certification (National General Certificate in Occupational Safety and Health)
INSTITUTION - ATM Safety & Environment
LOCATION - Corley, Coventry, UK
Date - 7th December 2007

DEGREE/CERTIFICATION - NISP - HSE Certification
INSTITUTION - Nigerian Institute Of Safety Professionals
LOCATION - Port Harcourt, Rivers State
Date - December, 2004

DEGREE/CERTIFICATION - Bachelor of Science Degree in Geology
INSTITUTION - University Of Calabar
LOCATION - Calabar, Cross River State
Date - 1992 – 1997

DEGREE/CERTIFICATION - PGD Business Administration
INSTITUTION - University Of Uyo
LOCATION - Uyo, Akwa Ibom State
Date - 2004

ADDITIONAL INFORMATION:
------------
Trainings
I have obtained trainings in the following areas over the years. There are:
Hazard Communication,Welding, Cutting and Burning Safety,Work Permit and Job Safety Analysis Training,Accident Investigation Training,Safety Rigging Practices,Overhead Crane Safety,Fire extinguisher Training,Lifting Safety,Confined Space Entry,and Emergency First Aid.

I have the following computer skills:
Ms Word, Ms Excel, Ms PowerPoint, SPSS (Statistical Program for Social Sciences),Data base Management using SQL Server.
Hobbies
I like watching the news and playing chess

Personality
I am humble and a good team player. I also have good aptitude to learn and work. I am energetic but work very well with time schedules. That is I have very good time management principles. I also have a can -do spirit in meeting reliable objectives and goals. I am analytical, a problem solver and reliable in the execution of my duties.

References:
Will be provided

Citizenship:
Currently I am a Nigerian Citizen

------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 2376)

Go to Search Parameters...

Brief Description

MBA and Master of Laws

Heavy Lift rigging superintendent.

Professioanl medcial Science Degree/Background which is closely related to HSE field. Completed the NEBOSH In't O.H.&S certificate program. Willing to work globally, learn new languages and continue advancing education. Current Documents for Offshore work. Motivated, Professional, Competent.

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Computerized inventory and stock manage control to acceptable levels and inventory accuracy & conciliation. Fuel consumption tracking. Etc.

Storage cavern, salt cavern, cavern leaching process, computer modeling, cavern development, leaching modeling, WinUbro, sonar, salt deposit, underground storage, hydrocarbon underground storage, leaching, salt

Mechanical & electrical hands on & design

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Operations, Technical, Leadership, Surface, Underground, & International Experience

Mechanical Equipment Specialist with 20 years of Heavy Industrial Experience

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Recruitment, Performance Managent, Organizational Development, Manpower Planning, Training, Succession Planning, Employee Relations, Compensation and Benefits, Policies and Procedures and Grievance Handling, Labor Union Negotiation and Admin functions

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

IIT Graduate - SAP Implementation Exp - 2 yrs

Skilled Communicator Seeks Marketing and Business Development Position

Contract Administrator, Paralegal-PC/Microsoft Proficient

4yrs Oilfield & 6yrs Management Experience

Professional career spans 12+ years in field of Construction,contract and project management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

MBA, experience in Clients relations and mutual fund industry.

Civil Enginner with Post Graduation in Advanced Construction management, expirene in Contracts for major Infrastratural projects abroad & in India, Good knoweldge in FIDIC condition of Contract

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Geologist

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

Bachelor degree mechanical engineer 15+ yrs experience, automobile global sourcing, supplier development, quality inspector, buyer, purchase, engineering,worked with HERO, LML, GAJRA in INDIA. (English, French) AutoCAD, Pro-E.

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

25 yrs Heavy diesel mechanic in Construction and Pipeline

M.Tech. Environmental Science - Natural Resource Management

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

Experience includes Phase I & II environmental site assessments, environmental impact statement, waste remediation, solid & municipal waste treatment and waste management, groundwater treatment plants O&M, lead and asbestos abatement, noise & vibration control, and building demolition.

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Welder of 27 years looking for work as supervisor in related field

I have completed M.Sc ( energy Efficiency),presently I am working for a Cement Company in India.My job responsiblities are: Leading & Developing CDM projects

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Piping engineer, pipeline engineer, corrosion engineer, mechanical engineer, project engineer, construction engineer

I am Rey U. Capariño, 32 years old, Filipino and a graduate of Bachelor of Science in Accountancy. I am currently working here Saudi Arabia as Accountant for a construction firm. I have been working for twelve (12) years both for accounting and administrative functions.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out