Resume - hands on experience in hardware and software design, circuit and PCB design, mic...

Misco Jobs

Resume #70916

CONTACT INFORMATION:
View contact information...

EXPERIENCES AND ACHIEVEMENTS
Electronics Engineer (Full Time)
ThermoFisher Scientific – July 2007 till Present
* To design and develop electronics circuitry and firmware for water analysis instruments
-Design various meter with TI MSP430 for determine the level of impurities in water supplies for domestic consumption as well as industrial use
-Wireless Conductivity Meter, Low Cost Conductivity Meter
* To source all the required electronics components and development tools
-Source for suitable components for various designs such as low power consumption, high SNR, EMC protection, RoHS, SMD
* To ensure that new products meet specifications and customer satisfaction
-Work closely with engineering, standard and marketing department to meet all requirements and exceed customer satisfaction
* To ensure smooth product transfer to production
-Make sure all design specification, schematic drawing, PCBA and others are well documented
* To design for EMI/EMC and safety compliance
-Make sure the product pass the CE testing, EMC EN 61326 specifications

Electronics Engineer (Full Time)
Intellect TDR Technologies Pte Ltd – October 2004 till July 2007
* Research and development on M2M (machine-to-machine) projects / products i.Developed AMR (Automated Meter Reading) system for remote monitoring and logging of electricity consumption and faults.
–Design firmware for TC65 to communicate with Digital Three Phase Kilowatt Hour Meter via serial port (RS232) for data collection and meter configuration.
–Monitor, alert and log file management are implemented to send back to server via GSM or GPRS using AT commands.
ii.Developed RFM (Remote Facility Management) system for monitoring and managing of facilities inside a building / room.
–Design RTU (Remote Monitoring Unit) with Microchip PIC micro-controller and TC45 to monitor status from all kind of sensors and faults reporting via SMS using AT commands.
–RTU is designed with expandable analog and digital I/O ports, sensors with analog or digital output such as current transducer, relay output, motion iii.Co-developed WiFAMS (Wireless Fault Alert Monitoring System) for controlling and monitoring of street lighting remotely.
–Design RTU (MCU) with relay outputs, analog inputs, digital inputs and battery circuit.
–Street lights are turned ON/OFF by relays via SMS commands, current transducers are connected to analog inputs to monitor current readings and battery is as backup power supply for RTU.

EDUCATION
National University of Singapore
Master of Science in Electrical Engineering – January 2008 till present

University of New South Wales, Australia
Bachelor of Electrical & Electronics Engineering – July 2002 till July 2004
* Achievement: Second Upper Honor Degree
* Research Project: Impulse Testing for Low Voltage Equipment
– To investigate the effect of various type of insulation cables through impulse testing and analyze the effect parameters.

Ngee Ann Polytechnic, Singapore
Diploma in Electronic & Computer Engineering – July 1999 till July 2002
* Achievement: Diploma with Merit
* Research Project: Micro-mouse Robot Design
– To build an artificial intelligence robot to solve an unknown maze within shortest possible time and route.

TECHNICAL SKILLS & KNOWLEDGE
* Hands-on experience in hardware and software design.
* Firmware design and development.
–Programming C language and Assembly language.
–Object Oriented Programming: C# and Java.
* Experienced in micro-controller (MCU) based circuit design
–Design sensor-based instruments with Texas Instruments MSP430 Ultra-Low Power Microcontrollers using JTAG emulation tools
–Design embedded systems, RTU (remote monitoring unit) with Microchip PIC micro-controllers: PIC16 and PIC18 series.
–Experience with Philips NXP LPC 2300 series ARM7 core
–Experience with Siemens TC45 and TC65, Microchip PICDEM 2 Plus development board and in-circuit debugger.
–Experience in integration of device I/O such as UARTS, sensors, GSM modems, A/D converters.
* Experienced in digital & analog circuits design
–Digital: RS232 interface circuit, micro-controller circuit, digital controls circuit, timer circuit, multiplexer circuit, data acquisition circuit etc.
–Analog: snubber circuit, regulator circuit, AC to DC converter circuit, op-amp circuit, sensors circuit etc.
* Experienced in various embedded development tools, such as MPLAB IDE, HI-TIDE, IAR Embedded Workbench, IAR PowerPac, µVision IDE, Eclipse.
* Schematic drawing, PCB layout and Routing (Protel99SE, Mentor Graphics Pads), soldering skills.
* Experienced in communication protocols: RS232 serial interface, AT command (GSM and GPRS).
* Experienced with electronic test equipments such as multimeter, oscilloscope, function generator.
* Analytical and problem-solving skills, project management skills.

AWARDS
* Director's List 2002
* Singapore Robotics Games 2002 (Second Runner-up in Micro-mouse Competition - Open Category)
* ECE Academic Staff Prize (For Outstanding Performance in Practical Work)
* Silver Certificate of Achievement in CCA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 2286)

Go to Search Parameters...

Brief Description

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Recruitment, Performance Managent, Organizational Development, Manpower Planning, Training, Succession Planning, Employee Relations, Compensation and Benefits, Policies and Procedures and Grievance Handling, Labor Union Negotiation and Admin functions

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

IIT Graduate - SAP Implementation Exp - 2 yrs

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

Skilled Communicator Seeks Marketing and Business Development Position

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

Contract Administrator, Paralegal-PC/Microsoft Proficient

Professional career spans 12+ years in field of Construction,contract and project management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

MBA, experience in Clients relations and mutual fund industry.

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

Bachelor degree of Business Administration graduate and very well know MS - Office, other computer languages also.

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

E-Business,E-Tendering,International Business Development

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

25 yrs Heavy diesel mechanic in Construction and Pipeline

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

Experience includes Phase I & II environmental site assessments, environmental impact statement, waste remediation, solid & municipal waste treatment and waste management, groundwater treatment plants O&M, lead and asbestos abatement, noise & vibration control, and building demolition.

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Piping engineer, pipeline engineer, corrosion engineer, mechanical engineer, project engineer, construction engineer

Professional experience in Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market

5 years experiences in Project Controls Engineer specifically with Cost & Planning engineering on major projects valuing approximately $4.5 Billion. I have experience in all phases of engineering, procurement, construction and have been involved in a wide variety of different contract PMC & EPC

I am a talented results-driven supervisor with versatile, cross-functional experience in team implementation, training, skills enhancement, coaching, mentoring and career progression seeking a career change in the oil and gas industry.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Certified Project Manager: MS Project Proficient 3 Years - Conception and Maintenance; Risks identify, log, track mitigation, etc; Issue resolution/ day to day PM

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Oracle Functional Consultant with over 9 years of experience in the Finance domain

Global Business Development Manager

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

Managementskills NQF level 6,NQF level 4, operationalskills NQF level6,Facilitationskills,trainingskills,computerskills

Strategic Commercial Management, Supply Chain and Project professional

Tender Administrator

MBA in marketing with 4 yrs experience

To secure a position a Purchasing /Buyer In your company.

hands on experience in hardware and software design, circuit and PCB design, microcontroller circuit and firmware design

Automation Engineer

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out