Resume - Control System Lead Engineer + PMP Certification

Misco Jobs

Resume #71375

CONTACT INFORMATION:
View contact information...

Profile
Graduate Engineer in Electronics & Instrumentation with about 10 years experience in Process Control based Industrial Automation handling Distributed Control Systems, in System Engineering, Commissioning, Start up Services, Special Softwares Implementation for Oil & Gas, Petrochemical & Power Projects including Revamp, Upgrade & Grassroot Projects. Overseas Working Experience -Singapore, USA, Saudi Arabia, Qatar, UK & UAE.

Qualification

Bachelor of Engineering (Electronics & Instrumentation) from Bharathiar University, Coimbatore, Tamil Nadu, India. First class degree with 69.5 %.
Project Management Professional (PMP) Certification from PMI.

Present Position & Employer:

SENIOR ENGINEER (Lead Engineer /Team Leader)
Yokogawa Engineering Asia Pte Ltd, Singapore (From Oct 2003 till date)

Major Projects Handled:

1) Abu Dhabi Gas Industries(GASCO)-Train3 NGL Project,UAE (Lead Engineer)
2) Saline Water Conversion Corpn –Power Plant & Desalination Project, Saudi Arabia
3) Schering Plough DCS upgradation Project, Singapore
4) Common Cooling Water Project, Ras Laffan,Qatar (Qatar Petroleum Projects)
5) Terminal Automation Project for Cochin Refineries Ltd, India
6) Additional Product Tankage Project for Cochin Refineries Ltd, India
GASCO,UAE SWCC,Saudi Qatar Petroleum Cochin Refineries Bharat Petroleum
Indian Oil Corpn Snamprogetti,Italy Schering Plough INTEL,USA KRIBHCO/IFFCO

Responsibilities Handled

Kick-Off meeting, Technical & Scope Definition meeting, Input documents validation, Technical, Commercial & Contractual issues, Subsystem Integration,Factory Acceptance Test, Change Orders, Engineering team management, Monthly Progress Review Meetings, Liaise with Customer,EPC & End User, Sub Vendor management, involvement in Site Cut over planning & Design pack preparation, Site Acceptance Test & Commissioning Assistance.

Skills Summary

* Basic & Detailed DCS Design, Subsystem Integration, System Engineering, Control Loops Implementation, Troubleshooting, Commissioning Assistance, Controller Tuning on YOKOGAWA CS3000 & CS1000 Distributed Control Systems.
* Preparation of Functional Design Specifications for Controls, Subsystem Communication Specifications, HMI, Special Softwares.
* Management of Remote Engineering Activities for System Engineering
* Development of Functional Block Diagrams, Logic Charts etc
* Performance Efficiency Calculation Package for Plant Efficiency
* Special Software Implementation (YOKOGAWA-PRM for HART/ Field Instruments Configuration) & Sequents of Events Manager –Event Recorder
* Site Activities:DCS Revamp, Up gradation, Cold & Hot Cut-overs
* Commissioning Assistance & Subsystem Integration
* Experience in interfacing field devices, transmitters and controllers to DCS.
* Experience in Silicon Wafer FAB (INTEL-FAB 17, USA) –Modicon plc.
* Troubleshooting & startup of SIEMENS PCS
* Contractor & Vendor Management
* Handling technical presentations and customer training.
* Good Leadership, interpersonal qualities & Planning Skills
* Manpower Management, Materials Estimation & Reports Generation
* Overseas Working Experience (Singapore, USA, Saudi Arabia, Qatar & UAE)

Career Summary

Oct 2003 till date Lead Systems Engineer
International Projects (SIC)
Yokogawa Engg Asia Pte Ltd, Singapore
Jan 2003 - Oct 2003 Instrument Engineer
CCC, Qatar -Qatar Petroleum Projects
Nov 2000 - Sept 2002 Project Engineer
Applitech Solution Ltd, Ahmedabad
(On Deputation to INTEL,USA from Feb-May 2001)
Sept 1999 - Nov 2000 Engineer- Services
Yokogawa Bluestar Ltd, Baroda
Aug 1998 - Aug 1999 Instrumentation Engineer
Fact Engg & Design Orgn
Cochin Refineries Site, India

Projects Summary

Abu Dhabi Gas Industries (GASCO)-Train 3 NGL Project
(Grassroot Project cum Hardware Upgradation /Software Revup of Existing NGL Trains)
Position Held LEAD ENGINEER /TEAM LEADER
(Leading a team of 10 engineers)
Key Responsibilities o Kick-off meeting & Project Definition Meeting o Input Documents Validation o Preparation of Functional Design Specifications for Controls, HMI & Subsystem Communication (ESD,F&G,MCC,MOV,Tank Gauging)
o Basic & Detailed Engineering o Control Scheme Typicals, Prototype Testing, Database Generation including Control Loops, HMI, Subsystem Communication & Integration o Preparation of Software Ordering Requisitions & Follow-up o Hardware Compatibility Check o Remote Engineering Management including RE Scheduling & Milestone Achievements o Monthly Progress Meetings & Technical Clarification Meetings o Preparation of FAT Documents & Site Up gradation Procedures o In-house-Testing & Monitoring of Compliance to Project Specification o Factory Acceptance Test (FAT)
o Management of Punch-Lists & Variation Orders o Onsite Activities: Hardware Up gradation & Software Revision Up o Site Acceptance Tests & Commissioning Assistance for Train-3 Project

Saline Water Conversion Corporation (SWCC), Al-Jubail, Saudi Arabia
(Revamp & DCS Conversion Project)
Position Held SYSTEMS & COMMISSIONING ENGINEER
Key Responsibilities o Control Systems Engineering on YOKOGAWA make Distributed Control systems (DCS) -CENTUM -CS3000 for 6 X 60 MW Power Plant & Desalination Plant, (22 Control Stations,22,000 I/O Points)
o Preparation of Control, Controller,Graphic,HMI,Special Software Specifications o Development of Functional Block Diagrams, Logic Charts etc o Control Systems Implementation for Saline Water Conversion Company (SWCC) Project at Kingdom Of Saudi Arabia.
o Development of FAT & SAT Procedures o Factory Acceptance Test & Site Acceptance Lists o System Configuration, Networking & Layout Implementation at Site.
o Commissioning of 6 X 60 MW Power Plant & Desalination Plant at SWCC.
o Controls Tuning & Successful demonstration of Load Swing Test.
o Special Software's –Plant Resource Manager & Sequence of Events Recorder.

API DCS Upgrade for Schering-Plough Pte Ltd, Singapore-Pharmaceutical

Position Held SYSTEMS ENGINEER

Key Responsibilities o Development of FAT & SAT Procedures
Documentation
Consolidated Contractors Company (CCC), Qatar for Qatar Petroleum Projects

Position Held INSTRUMENT ENGINEER

Key Responsibilities o Installation, Configuration & commissioning assistance for Field Instrumentation o Coordination with Instrumentation Vendors for Commissioning.
o Coordination with Other Departments for Releasing Work Fronts.
o Development of Work plans & Internal Scheduling o Generation of Daily Progress Report & Daily Manpower Reports.
o Generation of Inspection Requests
INTEL Massachusetts Inc, Hudson, Massachusetts, USA (On Deputation)

Position Held INSTRUMENT ENGINEER

Key Responsibilities o Intel has their Silicon Wafer manufacturing facility (FAB 17) at Hudson, MA.
o PLC Code Evaluation & Review of work done by System Integrators o Critical Task Management -Development of Work plans & Task plans o Task plan Execution & Crisis Monitoring o Modicon PLC-AIM Scada Communication
Applitech Solution Ltd., Ahmedabad, India

Position Held PROJECT ENGINEER

Key Responsibilities o System Requirement Study, Design Input Review & PLC Programming Project for Three- Probe Analyzer using Yokogawa make FA-M3 series PLC for Yokogawa, Singapore at Development Center, Ahmedabad.

Yokogawa Bluestar Ltd, Baroda, INDIA

Position Held SERVICE ENGINEER

Key Responsibilities o System Engineering /Service Support / Loop Checking /Commissioning Assistance/Trainings on Yokogawa CS3000 DCS Customer Trainings for Bharat Petroleum Corporation Ltd,Indian Oil Corporation Ltd,Narmada Chematur Petrochemicals, Aarthi Industries Ltd, Pushpa Polymers,Vardhman Acrylics Ltd, KRIBHCO & IFFCO.

FACT Engineering & Design Organization,INDIA

Position Held SITE ENGINEER (INSTRUMENTATION)

Key Responsibilities o Installation, testing and commissioning of Field Instruments, Site Acceptance Tests (SAT), Commissioning & Start-up Assistance.
Terminal Automation Project for M/s Cochin Refineries Ltd
Additional Product Tankage Project for M/s Cochin Refineries Ltd

Personal Data
Nationality: Indian
Date of Birth: 2 nd November 1976
Marital Status: Married
Languages known: English, Hindi, Malayalam, Tamil, Gujarati

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 2270)

Go to Search Parameters...

Brief Description

Having 11+ years professional experience in the EPC Contract for turnkey Projects handling Installation of Instrumentation and Industrial Process Control Systems in both green field and brown field area in India & Middle East, gaining experience ranges from Site Management & Administration

Subsea Controls

Operations, Business Developement, International experience, North Africa, Saudi, Kazakhstan, Russia.

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

Fresh 4 years commerce graduare and seeking jobs in accountints adn finance pls see my resume and contact me.

IT professional, experienced in a variety of networking environments supporting multiple centers throughout the southeast with the ability to respond effectively to time-sensitive situations and satisfy demanding customer support needs was critical.

I have installed, serviced, maintained, repaired centrifugal and reciprocating compressors, turbines, pumps, blowers and drivers.

EXPERIENCE

Vision for SCM: Looking for a challenging position to add more value for the integration of supply chain management process for achieving highest level of customer service at low cost to serve basis in any FMCG Foods,Cosmetics,chemicals, oil & gas businesses.

Instrument Design System i.e. INTools DCS Specification/Configuration Contracts and Budgetary Management Installation engineering/Commissioning Maintenance engineering, procedures and fault diagnostics

Mangement, and science

ENGINEERING - PROJECT MANAGER Looking for challenging opportunities

14 years in the energy community. Expertise in project coordination, technical knowledge, and communication skills. Comfortable with all aspects of industry. Project promotion, development and production through sales and fiscal accountability.

Experience with CAD/CAE expertise.

A challenging position in an industrial setting that takes advantage of my experience in polymer science & rheology, reaction kinetics, surfactant chemistry, process engineering, modeling and simulation.

Costs Analysis; Cost Controlling, Business Development

Masters Degree Maintenance Engineering and Asset Management/ Experienced Condition Monitoring Engineer/Vibration Analysis/Rotating Equipment troubleshooting, repair, overhaul/oil analysis/ reliability improvement issues/ please see full CV for details

International Manager: able to relocate and start almost immediately.

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

KEYWORDS Mechanical, Electromechanical, Power , Control , sheet metal, Acoustics , ISO 9001, CAE , CAD, CAM, Manufacturing, Production, Maintenance .

Seeking position that would help develop myself in the management field in the Petroleum Industry

To establish wider horizons in the automation of business with the inherited knowledge in the respective field.

An International Quality Assurance & Safety Manager with a proven track record for ISO 9001 implementation, maintenance and development within the Oilfield Engineering and Manufacturing Industries.An experienced Lead Auditor of Management Systems, Engineering Projects and Suppliers

Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects

Master of Science Civ. Eng. - Contracts/Subcontracts Admin. & Management; Pre-Award & Post-Award Contract Activities; Contracts Commercial & Financial Matters, Invoicing, Change Orders, Claims; ITT, Biding, Evaluation Reports, Recommendations,

Project Management, Aramco, Telecom, Unix, management, Data, Fiber optics

15 years extensive experience in construction, project management.

17 yrs experience - industrial & construction industries - mobile plant management Operations Manager - Oil Electro Ltd - Baku Azerbaijan Manager - BOC Gases - Solomon Islands Manager - Macfarlane Generators - Generator hire, sales & service Stock ordering & control Computer literate

Project Management, Financial Control Budgets and Planning, Petroleum Economics, Oil sands, Heavy Oil, Geology,

Cost Engineer of EPC projects in petrochemical and refinery feild

IT Specialist with emphasis on Project Management, Technical Services and International Project Coordination

Growth with Profit (Marketing, Operations, Sales & Business Development)

Complete knowledge of administrative and managerial best practices for Planning, Sales, Design, Manufacturing, Delivery, Commissioning, Start-up and Warranty of heavy industry goods and services. Two Bachelor engineering degrees and Harvard Business School.

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Looking for ad-hoc project accounting work

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

A pragmatic and well balanced project manager/engineer with a ‘can-do’ attitude.

Am a cost control engineer working at Technip Abu Dhabi "French Oil & Gas consultancy".I have a total of 6 years experience all gained in Technip. I graduated from Jordan university of science & technology as an Electrical Engineer specialized in telecommunications.

MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Expert eperience in commissioning /operation in refinery/petrochemical/Cryogenic LPG terminal/hand on experiance in DCS/quality control/Marketing

I have several years of management qualifications. I have worked both offshore & shore based Preforming task including but not limited to roustabout, roughneck, storekeeper, rig clerk,all of which were offshore, then moving shore based into head office in the position o f maretials coordinator

Control System Lead Engineer + PMP Certification

I am a Doctorate degree holder from Andhra University, Indian from the branch of "Economic Geology". I also have very good knowledge in the field of computers and have few deplomas in computers. Have experience of more than 18-years

Experienced self-starter in LNG and Gas commercial with strong managerial and problem-solving skills and oversea exposure in LNG Supply Chain Optimization

I am working in oil, gas and offshore projects and plants from 14 yrs in india, middle east and europe for multinationals for erection, commissioing and projects.

AM Fabrication Engineer with CSWIP W/I 3.1,European Welding Inspection Practitioner, International Welding Inspector with ASNT level II in MPT,DPT,RFI,UTG having around seven years of experience in ndt/inspection of Oil&Gas Installations both Onshore/offshore.

Recent MBA graduate from Le Moyne College, Syracuse, NY and has a 4 years of experience as a civil engineer. Wants to have a career change working at petroleum/oil/gas industry and willing to relocate and travel.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out