CONTACT INFORMATION:
View contact information...
Date of Birth 14.07.70
Sex Male
Marital Status Married
Nationality Indian
Passport details Passport No: T-632406
Place of Issue: Chennai
Date of Issue: 31.01.1995
Date of Expiry: 30.01.2005
Driving license details
Country License no Type of vehicle
India 5471/ney Light motor Vehicle &Motor cycle with gear
Saudi 179457 Light motor Vehicle
Educational Qualification:
Degree Discipline Period Place of study
Bachelor of Engineering.
Mechanical Engineering
1988- 1992
Regular
Madurai Kamaraj
University, Madurai.
Post Graduate Diploma
Materials Management
1992-1993
Correspondence
Annamalai University, Chidambaram.
Welding & NDT Qualification:
Subject Institution Period of study Certificate no.
AWS-CWI American Welding Society December 2003 01011011
RT-Level III American society for Non-Destructive testing November 2003 107863
(http://www.asnt.org/)
UT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)
MT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)
RTFI-Level II Industrial Quality Concepts, Chennai. December 2000 203007
PT- Level II Kalva Institute of NDT&Quality Management, Madras. June 1995 98/PT-II/151/M
Welding fundamental for Supervisors & Engineers Advanced Training Institute, central government of India, Madras. February 1995 027598
Process Instruments (Thermal Plants) Advanced Training Institute, central government of India, Madras. March 1995 027704
Experience details: Abstract
Company Year Job title
Babu Engineering Corporation, Neyveli, India. May 1992-June 1994 QA/QC Supervisor
Wens NDT Services, Chennai, India June 1994-June 1995 NDT Technician
NDT&CCS, Dammam, Saudi Arabia. June 1995-May 1998 Site In charge, Senior Radiographer, Film Interpreter, Acting Radiation Safety Officer.
Sonic Inspection Services, Chennai, India. June 1998-October 1998 T, K, Y-Operator.
Husseini Inspection Company, Dhahran, Saudi Arabia. November 1998-Still Senior NDT Technician, & NDT Specialist (NDT Inspector).
Experience Details: Briefly
1) Year: May 1992-June1994
Company: M/s. Babu Engineering Corporation, Neyveli, India.
Job title: QA/QC Supervisor.
a) Neyveli Lignite Corporation, Neyveli, India.
Job Description: Shutdown of Power Boilers.
My Job has to:
(i) Execute Leak test on the Boiler walls & Boiler tubes for the duration of
Shutdown.
(ii) QA/QC aspects involving scheduling of technicians for RT, UT, MT,
PT. Film Interpretation according to ASME Sec VIII- Boiler and Pressure
Code, and ANSI B 31.3.
(iii) Witness for Eddy current test at inside the boiler tubes, for corrosion and
Wall thickness lessening.
(iv) Build up the written procedure and manuscript of each and every effort.
(v) Coordinating with third party inspection.
b) Mettur thermal power plant, Mettur, India.
Job Description: Dismantling power Package Boiler from Mettur and
Erection & commissioning at North Madras Thermal
Power Project.
My Job has to:
(i) Full involvement with my group, take apart the Power Boiler from
Mettur to North Madras. And assembly at North Madras Thermal
Power plant.
(ii) Modification of pipe lines according to clients necessities, and
Recommend to taking weldments by RT& UT.
(iii) Film Interpretation according to ASME Sec VIII, and ANSI B 31.3
2) Year: June 1994- June 1995
Company: M/s. Wens NDT Services, Chennai, India.
Job Title: NDT Technician.
a) Tamilnadu Petro Products, Chennai, India.
Job Description: T&I activities.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Holiday Inspection& External coating thickness measurements of pipes.
(iv) Hardness testing of vessel weldments.
b) Madras Refinery Limited, Chennai, India.
Job Description: T&I activities and Shutdown.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Hardness testing of vessel weldments.
(iv) Film Interpretation with ANSI B 31.3 & ASME Sec VIII.
(v) Involving with Eddy current test groups for internal corrosion of
Heat Exchanger pipes.
c) Indian Oil Corporation, Chennai, India.
Job Description: T&I activities as on tank farm areas.
My Job has to:
(i) Perform NDT jobs at the tank farm area.
(ii) Alteration of pipe lines according to clients requirements, and
Suggest to taking weldments by means of RT& UT.
(iii) Corrosion monitoring by RT/ UT methods.
(iv) We have did according to clients requirements Post Weld Heat
Treatment.
3) Year: June 1995- May 1998
Company: M/S. NDT & Corrosion Control Services, Dammam,
Saudi.
Job title: Site In charge, Senior Radiographer, Film
Interpreter, Acting Radiation Safety Officer a) R&D Building, Saudi Aramco, Dhahran, Saudi Arabia. July 1995- August 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have performed NDT activities at several areas, like Al-Hasa Bulk Plant, Dhahran Bulk Plant, Qatif Bulk Plant & King Fahd Airport terminal (Aramco area).
b) Rabigh Refinery, Saudi Aramco, Rabigh, Saudi Arabia. September 1995-October 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have merged with Inspection department, and involved in T&I activities, and On Stream Inspection activities.
(iii) We are specialized in Compressor and Tank farm inspection activities. (UT & RT)
c) Jeddah Refinery, Saudi Aramco, Jeddah, Saudi Arabia. November 1995- March 1996
(i) I have joined as a Senior Radiographer and Film Interpretator. (Temporary- Vacation relieve)
(ii) Radiation source handling, Issuing and receiving from radiographers, and RTFI according with ASME Sec VIII, ANSI B 31.3, API 1104.
(iii) And, I have involved T&I activities & Shutdowns with Inspection teams at several units.
(iv) Corrosion areas monitored by RT/ UT methods. And <2" Diameter pipes or nipples are covered by RT methods for corrosion monitoring.
d) SAFCO, Dammam, Saudi Arabia. June 1996- July 1996.
(i) To perform RT/VT/MT activities on the Heavy vessel and tanks
For SAFCO.
(ii) Hardness testing and Coating thickness are performed inside the vessel.
(iii) Worked as a NDE Inspector, and merged with the inspection unit, and concerned in the T&I activities for their company.
(iv) Heat Exchanger tubes tested with Eddy Current tests with my groups.
(v) MT/PT inspection carried out on the Tank inside Circumferential and Longitudinal welds.
(vi) Witness for Holiday testing of external coating of the pipes.
(vii) And internal coating verified by Radiography.
e) Consulated Contractors Company, Rastanura refinery extension Project, August 1996- November 1996.
(i) During this period, we have done several NDT jobs like RT& MT & PT for Saudi Aramco.
(ii) And, oversee training programs for level II individuals.
(iii) Build up the written procedure and Document the RT& MT reports.
(iv) Coordinating with third party inspection, while auditing time.
f) M/s. SRB Limited, Shaybah GOSP construction, Shaybah, January 1997-March 1998
(i) Job description is to conduct RT, MT, PT at Wellheads, Trunk lines and flow lines for their contracts for Saudi Aramco.
(ii) More than 20, 000 joints, we have taken Radiography and more than 3000 joints we have conducted MT& PT.
(iii) I have worked as a Site Coordinator, Senior Radiographer and Film interpratator, and acting Radiation Safety Officer.
(iv) I am the one, trained and certified from my company, to shift the source from Radiation camera to Lead pot and lead pot to Radiation camera.
(v) Administer training programs for Level I and Level II individuals in the specific NDT methods for which he is certified.
g) Rabigh Refinery, Saudi Aramco, Rabigh, April 1998-
May 1998.
(i) I have joined as a Senior radiographer in Rabigh Refinery.
(ii) I have involved with Inspection groups, and performed NDT activities on T&I, PM shutdowns.
(iii) And On stream Inspection, FIR Programs also we have covered.
(iv) For personnel reason, I have resigned my job, and return back to India.
4) Year: June 1998 – October 1998
Company: M/s. Sonic Inspection Company, Chennai, India.
Job title: T, K, Y- operator.
(i) I have joined as a T, K, Y- operator, and performed T, K, Y, testing at NEPC-MICON Wind Power Mill, for their products.
(ii) Afford technical support to company personnel by recommending NDT methods for specific problem in their products at AUDCO Wind Power Mill.
(iii) Build up the written procedure and document of each and every work.
5) Year: November 1998- March 2000.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: Senior NDT Technician.
a) Udhailiyah Operation Inspection Department, Udhailiyah,
Saudi Aramco, November 1998- March 2000.
(i) I have joined as a Lead U.T. Technician, and I governed nearly 25 plants. (Gas Oil Separation Plants, and Water Injection Plants, & Khuff gas Manifolds)
(ii) I have merged with Inspection unit and I have involved several NDT/ QC activities.
(iii) We have performed several activities at T&I, and PM Shutdowns.
(iv) We are monitoring FIR, and on stream inspection procedures.
(v) During this period, most of the corrosion areas, I only found from the plant pipes from UT corrosion survey.
6) Year: April 2000-Still.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: NDT Specialist a) Southern Area Corrosion Control & Inspection Department,
South Ghawar Inspection Unit, Udhiliyah, Saudi Aramco,
April 2000- June 2003.
(i) I have joined as a NDT Specialist, and I have performed Inspection activities at Hawiyah and Haradh areas.
(ii) I have involved with the Inspection unit, and performed on stream inspection activities, FIR activities.
(iii) Develops the written procedures for both basic and advanced NDT methods of RT, MT, PT, UT, MFL, VT & ET.
(iv) Perform Interpretations of National Codes and Standards.
(v) Interpret results of specialized NDT examinations and develop reports detailing the findings of those examinations.
(vi) Setup and administer training programs for Level I and Level II Individuals in the specific NDT methods.
(vii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.
c) Southern Area Producing Engineering Unit, South Ghawar
Inspection Unit, Udhailiyah, June 2003- Still.
(i) I have joined as a NDT Specialist (NDT Inspector), and I perform inspection activities with the Inspection Department at Khurais& Hawtha area.
(ii) I have to act as a mentor for Saudi NDT Technicians and develop their ability to become fully certified in Various NDT methods.
(iii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.
(iv) Perform Interpretations of National and Standards. (Like- ASME Sec VIII, ASME Sec IX, ANSI B 31.3,31.6, AWS D1.1, API 1104, API 653)
(v) Provides technical assistance to operational personnel by recommending various NDT methods for specific problems.
(vi) Witness for the Eddy current test of Heat exchanger tubes for internal corrosion and wall reductions.
(vii) And witness for the Holiday inspections and external coating thickness.
(viii) Develop written procedures for both basic and Advanced NDT methods of RT, MT, PT, MFL, VT, and ET.
I am very sincere and hard working. I have believed that there are no shortcuts to success. Now, I am looking for a more challenging job. So, that I have applied for your company.
View contact information... |