Resume - Accomplished up to Manager/Division Head (Instrumentation & Control System) in ...

Misco Jobs

Resume #79342

CONTACT INFORMATION:
View contact information...

Nationality: Indian

Educational Qualifications: M.E-Instrumentation Engineering, 1993
MIT, Anna University, Chennai, India

Professional Affiliation: Offered Research Technical Presentations/ Seminar on Human "Artificial Heart" & member of IEEE-1986-90

Training Programme: 1.Self offered many Technical Presentations, Class Room & ON JOB-Training Courses had conducted by me for Client personnel at various occasions.
2. Factory Training on Siemens PLC Systems
SUMMARY( Profile):
* Accomplished up to Manager/Division Head (Instrumentation & Control System) in India and Project Engineer in Overseas, having over 17-Years of extensive experience with broad ranging in Up stream and Down stream of the Oil & Gas Sectors (Oil & Gas Production, Transmission Pipelines, Refineries, & Petrochemicals) and Power Sectors. Proven leader ship skills- involving Leading the Team/Department with Multidiscipline & Multinational environment, managing, developing & motivating team to achieve objectives & Targets. Flexible committed individual with excellent interpersonal verbal and written communications skills & Projects Execution / Technical Problem resolving skills to handle complete spectrum of Instrumentation & Control System Conceptual FEED Design, Detailed Engineering, FAT&SAT and Construction, Pre-Commissioning/ Commissioning, Start-up, Operation & Maintenance and Shutdown activities and Conducted Class Room & On-Job Training Programme got appreciations from KOC.. Also Experienced & Participated in the HAZOP, HAZID Studies, SIL Reviews, HIPPS Studies and Feasibility & Reliability Engineering etc..

ƒæ Personal Strength & Achievements: Accomplished Instrumentation Engineer as under

FEED Design Stage Accomplishments:

* Having Project experience including FEED design, Tender preparation, project planning & scheduling, cost monitoring, contract coordination, detail engineering as detailed below.

* Preparation of Techno-commercial proposals for Instrumentation Control Systems. Pre Bid/ technical/Commercial discussion with Client/Consultants which leads to get contract award.

* Identification & Implementation of applicable Engineering procedures and International Standard practices/Codes for Control systems (DCS, ESD, F&G, Foundation Field BUS, Profibus, CMS, SCADA and PAGA, Field measuring, and Final Control Elements at the State-of- Art-Level.

* Participating in the Preparation of P&IDs, Defining Control System inline with Plant Operating Philosophy, Hazardous Area Classifications and Study & implementing HAZOP, HAZID, SIL and HSE/Safety aspects.

* Preparation of scopes of work & ITT documentation for FEED. Feed Design accomplished such as Preparation & Review of PIDs, Control philosophy in-line with Plant operating philosophy, Control Systems/ Instrument Material Selection & Sizing etc...

* Evaluation of tender submissions by Main EPC Contractors & Vendors.

* Liaison with Sub-Contractors & Vendors and other Discipline Engineers for Technical requirements/Clarification.

Detailed Design/Engineering Stage Accomplishments:

„« Detailed engineering of various projects which includes Review & Preparation P&IDs, Engineering Documents/Deliverables. Liaison with Client/Consultant & Getting Approval for the above Engineering Documents. Review & Approval of Vendor's Drawings & Documents. Preparation of Good for construction/Project Execution Drawings.

„« Well conversant with International Standard/Codes such as ISA/API/ASME/ANSI/DIN/BS/IS etc, and Hazardous Area Classifications/Safety integrity Levels (SIL) for PCS/ESD/F&G systems

„« Expertise in various control system including DCS, ESD, F&G, Foundation Field Bus, Profibus, Fiscal Flow Metering & Proving System, HIPPS systems, Analyzers, field & control Instrumentation, UPS, Paging, Fire Alarm Systems, HAZOP, SIL Studies and System Integration

„« Having Good experience in Foundation Field Bus Design and implementation and hands working experience ABB and Honeywell Field Bus System

„« Preparation of Specification/Data Sheets for Field/on-line Instruments & Systems such as DCS/PLC/ESD/F&G/SCADA Specification, Control Schemes, Base Logics, Graphics, Groups, History & Trends etc. Also procurement & FAT/SAT of the same.

„« Developments of Logic Diagram for process plant, ESD and F&G interlock logics to cater total plant/Refinery. Also develops Start up and safe shut down Logics, BMS (Burner Management System), and other Equipment safety interlocks for Compressor/Drive Turbines and HT- Motors etc...
„« Worked as Expert Team member for doing Thermal Efficiency improvement study & Modernization of Instrumentation to Sate-Art-Level at Shuibha Refinery, KNPC Kuwait. Did study & Front Engineering.
„« Having Project experience including design, Tender preparation, project planning & scheduling, cost monitoring, contract coordination, detail engineering & hot loop cutover.
„« Expert in all vendor of DCS, ESD, FAS, etc and the latest state of the art technology and having experience in leading group of control system design engineers in multi projects, simultaneously.
„« Leading the Commissioning Team as a Commissioning Coordinator for commissioning of over all plant & having extensive commissioning/Start up experience and self commissioned, many Critical Equipments Viz... High Capacity Pumps, Compressors with Anti surge Control systems, Gas/Steam Turbines, Oil/Gas/Dual Fired Burners, Acid Gas Blowers, Surge Relief Skids, Custody transfer Fiscal Metering skids and Woodward Governors etc.., in addition to many DCS,PLC,ESD,F&G, HVAC and BMS Commissioning. Also problem identification & Trouble shooting interlock Logic Modifications as per process requirements and site Conditions and Team member for conducting plant Performance Acceptance Test (PAT).

„« Worked as Training Coordinator & Conducted the Class Room & On-Job Training Programme and got clients appreciations

„« Experienced with HAZOP,HAZID and SIL Studies. Also experienced with Feasibility & Reliability Studies.

Operation & Maintenance Accomplishment

* Production Process & Instrumentation facilities Upgradation, Promoting New Instrumentation Projects with Modern Control systems (DCS, ESD, F&G, CMS, SCADA and PAGA), Field measuring, and Final Control Elements at the State-of- Art-Level.
* On the various occasions, Techno - Economical Solutions for the trouble free operations of running plants are provided & executed which had yield with good results.
* Self motive personality to Coordinate and raise to occasions to meet the Production Targets by Saving the plant from Shutdown and scope up all Instrument Maintenance jobs with in specified targets of Shutdown periods with out foregoing safety of the human & Plant/Properties.
* Developments of Logic Diagram for process plant, ESD and F&G interlock logics to cater total plant/Refinery. Also develops Start up and safe shut down Logics, BMS (Burner Management System), and other Equipment safety interlocks for Compressor/Drive Turbines and HT- Motors etc...
* Leading the Commissioning Team as a Commissioning Coordinator for commissioning of over all plant & having extensive commissioning/Start up experience and self commissioned, many Critical Equipments Viz... High Capacity Pumps, Compressors with Anti surge Control systems, Gas/Steam Turbines, Oil/Gas/Dual Fired Burners, Acid Gas Blowers, Surge Relief Skids, Custody transfer Fiscal Metering skids and Woodward Governors etc.., in addition to many DCS,PLC,ESD,F&G, HVAC and BMS Commissioning. Also problem identification & Trouble shooting interlock Logic Modifications as per process requirements and site Conditions and Team member for conducting plant Performance Acceptance Test (PAT).

* Also experienced with NGL plant commissioning, Operation & Maintenance

I. Experience with M/s. Zueitina Oil Company, Libya

1. From June'2008 To Till Date: Position: Instrument Project Engineer

Nature of Jobs/Responsibilities:
* Preparation of Conceptual Design Basis & Statement of Requirement (SOR) and Cost Estimates for New Projects.

* Develop the budget request for the New Projects and Presentation of Project Highlights to Management, NOC and owners representatives and for required Budget.

* Preparation of Scope of work, Specifications and Drawings for FEED Design, Enquiry Packages with bid forms and instructions for issue to Bidders. Ensure that the resources and SOW are agreed for the Conceptual Design. Complete the design as per schedules & Plans.

* Develop the Project Execution Plan & the Contracting Strategy and get Management or Bids committee approval as appropriate.

* Technical and Commercial evaluations and Clarifications for received Bids and eensure the selected Bid is a L3 budget and within stipulated Project Schedule and get Bids committee approval prior to award of Contract.

* Checking of Contract documents for compliance with Company requirements. Ensure that design, procurement, construction and commissioning activities are carried out as per the project schedule and as per the contract.

* Administration of the Contracts and Orders through to Project Completion and Responsible for progress management e.g. reviews, meetings, reports, schedule updates

* All related Technical Matters, and liaison with other discipline Engineers and Responsible for managing the many project interfaces during design and execution with other projects, terminal operations, suppliers, Technical Authorities etc. Develop a Project Interface Management Plan.

* Presentation of instrument Projects to Management, NOC and owners representatives.

* Carrying out site visits to gather information and to resolve project related problems.

II. Experience with M/s. Petrofac International Ltd.
1. From Nov'2006 To May'2008: Position: Instrument Superintendent

Project: RAG & Flare Mitigation Integration Project at Qatar Petroleum, Qatar.

Nature of Jobs/Responsibilities:

* Leading the Instrumentation Construction and Commissioning team at Project Site
* Expert Guidance in resolving Technical problems related to Engineering/Interlock Logics etc...
* Support for Detailed Engineering for RAG& NGL ¡V Flare Mitigation Project by Study & Collecting Engineering Inputs from Existing plant (Various NGL1, NGL2, NGL3 and NGL4)
* Testing & Commissioning of systems such as DCS, ESD, F&G,CMS and Ethane Rich Gas (ERG) Compressors & ACID GAS Blowers and various Pumps for Off spec Vessels, KODs etc..,
* Coordination with Client and Vendors and extending Technical Support for Project Execution / Instrumentation Commissioning.
2. Nov'2005 to Nov'2006: Position: Commissioning &Training Coordinator

Project: Replacement of NK Crude Oil Export System for Kuwait Oil Corporation (KOC), Kuwait.

Nature of Jobs/Responsibilities:
Leading the Commissioning Team & Over all Plant Commissioning including Process & Instrumentation for Oil Gather centre GC-15, GC-23,GC-25 and Point-A Manifold with Export Transit lines TL1,TL2, TL3 & MEW lines Fiscal Metering & Surge System, etc,.
* Preparation of System Definition/Development & System Handover procedure etc...& getting Client's approval.
* Preparation of Commissioning Procedures /Method statements for all Equipments and Systems and getting approval from Client.
* Planning/Scheduling for Pre-Commissioning, Plant start up & Commissioning. Coordination with Engineering, Client & Vendors and Sub- Contractors
* Testing, Commissioning and Start up of various control system such as
* Honeywell & ABB make DCS systems,
* HIMA, Honeywell, GE-Fanuc make PLC/ESD systems,
* GE-Fanuc & Tyco Wormald make F&G system,
* Emerson make SCADA system,
* Bentley Nevada make CMS
* Sulzer make VSD Export/Booster Pumps etc,
* Commissioning of Fiscal Metering Skid, Surge Relief Skids, HIPS type ESDVs/ MOVs etc...
* Conducting & Proving the Plant Performance Acceptance Test (PAT)...
* In addition to above Class Room & on-Job Training Programmes were conducted to KOC-Operational & Maintenance Personnel and got very good appreciation. Letter is attached for reference.

3. Sep'2004 to Nov'2005: Position: Lead I & C Commissioning Engineer

Project: British Petroleum(BP)'s World Class & largest Cross Country AGT/BTC-Oil Pipeline & Facilities Project at Azerbaijan
M/s. BP / BTC' s Azerbaijan-Georgia-Turkey (AGT)Cross Country Pipe line for Crude Oil transportation from Sangachal Terminal (in Caspian Sea) to Turkey/Ceyhan Terminal ( Merritradian Sea) through 42" Dia, 1800Km Pipe line & Pigging /Pumping stations at Azerbaijan & Georgia.

Nature of Jobs/Responsibilities:
Leading the Instrumentation Commissioning team and responsible for Commissioning of Instrumentation Control systems both IPA1 & PSA2 Oil pumping stations at Azerbaijan which includes.

* ABB (Advent-450) supplied ICSS, PCS, and ISS & ESD systems.
* Telecommunication System includes Fiber Optical Communication,
* Potable water Pumping system, Fire Water pumps, Deluge valves & Sprinklers systems
* BMS(F&G and HVAC ) Instruments and its Controls for Heating/ Cooling
* High Capacity Main Oil Pumps ( Sulzer make) with Solar Turbines
* All type of Smart Field Instruments, Transducers and Analyzers (O2, CO2, SO2, BS&W, SOX/NOX, and HC) etc... Which are employed at Oil Pigging & Pumping Stations
* All Types Control Valves, MOVs (Biffi & Rotork), ON/OFF Valves and PCVs, Power Cylinders and ESDVs of Bettis and Paladon makes.
* Bentley Nevada Vibration/Temp Monitors/Probes ( 3300 Proximity Probes and 3500 Monitors)
* Khrone Make Ultrasonic Flow meters and Thermal Mass Flow Meters
* E&H Radar Level Transmitters. All type of Fire & Gas Detectors and Aquatic Leak Detectors

III. Experience with M/s. BHPV Ltd.

1. July'2001 to Sep'2004: Position: Manager/ Division Head

Leading the Team for detailed Engineering, Site Execution and Commissioning of various Oil & Gas Projects as listed below

„« GSU & LPG Recovery Unit, 1x130 TPH Oil fired Boiler for CCP and 1X1000NM3/Hr N2 Plant for M/s. Chennai Petroleum Corporation (CPCL) Chennai.
„« SRU & DHDS units, Oil Terminal Automation unit,1X 1200 HPN Plant and1X900 HPN Plant for M/s. Indian Oil Corporation Ltd(IOCL), India
„« CDU &VDU Heaters, 1x40TPH CO-Boiler and 1x50TPH utility Boiler for M/s. Hindustan Petroleum Corporation Ltd(HPCL), India
Nature of Jobs/Responsibilities:
Leading the Team for Engineering, Execution & Commissioning of Projects detailed above, following system engineered and Commissioned.

DCS System
Honeywell TDC-3000, Honeywell GUS-10, Yohogowa Centum-XL and ABB Advent -450
PLC/ESD System
Honeywell FSC, Honeywell Logic Manager
Allen Bradley, Siemens ( Step-5 /Hot Stand by)
HIMA,GE-Fanuc LM90-30 and MODICON

Other Instruments:
All type of Smart Field Instruments, Transducers and Analyzers (O2, CO2, SO2, BS&W, SOX/NOX, and HC) etc...
All Types Control Valves, MOVs ( Biffi & Rotork), ON/OFF Valves and PCVs, Power Cylinders
Wood ward Governors, Bentley Nevada Vibration/Temp Monitors/Probes (3300 Proximity Probes and 3500 Monitors)
Turbine Meters, Coriolis Mass Flow Meters and PD Meters

Equipments:
All High Capacity Centrifugal Pumps(Constant & VSD)- Sulzer, KSB make
All High Capacity Multistage Compressors ¡V Ingrasoll -Rand
Gas Turbine ¡VSolar & BHEL Make & Steam Driven Turbines ¡V Nodroskhi, ABB.
Gas, Fuel Oil and Dual Fire Burners- John-Zing, Critfield and Sterling Process.

2. June 1997 to July'2001: Position: Senior Instrument Engineer

Nature of Jobs/Responsibilities:

Leading the Team for detailed Engineering, Site Execution and Commissioning of various

3. July 1993 to June1997: Position: Instrument Engineer

IV. Experience with M/s. Agaram Industries Ltd Chennai India.

1. June'1990 to May'1991: Position: Instrumentation Engineer

General Information:

Self done a Research Project in " ARTIFICIAL HEART " called " ELECTRO ¡V MECHANICAL SIMULATION OF ATRIO - VENTRICULAR SYSTEM " during my ME Degree Program and same was presented in a open General Seminar conducted by Anna University & got " THE BEST PROJECT AWARD " for the year 1992 - 93. The project was also exhibited to the Public in "MITEX - 92 / 93.

ƒæ Self-Normally works on computers for doing Design & Detailed Engineering works as day today activities by using window based packages such as MSOffice, MICROWARD, MICROEXCEL, MICRO POWER POINT and AutoCAD, etc

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2546)

Go to Search Parameters...

Brief Description

As a graduated Professional Chemical Engineer I have many years project engineering experience and this in a number of positions and countries.

I have a successful track record within the fields of Engineering, Procurement, and Project Management at senior management levels within the Oil, Gas,and Energy Sector. I have supported this experience through ongoing and successful completion of various qualifications relevant to these disciplines

A conscientious & pro-active professional with 20+ years experience in 2 continents. Expertise in risk & project management, development/training of personnel, preparation of emergency response procedures, advising management groups and a commitment to a best practice top quartile safety culture.

Accomplished up to Manager/Division Head (Instrumentation & Control System) in India and Project Engineer in Overseas, having over 17-Years of extensive experience with broad ranging in Up stream and Down stream of the Oil & Gas Sectors (Oil & Gas Production, Transmission Pipelines, Refineries, &

Experience: Over twenty-four years of managerial positions in the Oil and Gas industry. Involved with both onshore and offshore, national and international upstream and production operations. Including eight years of sponsoring industrial Oil and Gas related Research and Development projects.

Personal details: Purposive, hard-working, responsible, disciplined, steady, team-worker. Correct in relationships with people. Can work in different regions of the Russian Federation and abroad. Other skills and occupations: Experienced user of PC (experience of computing): MS Office (Word, Excel),

I have over 14 years Procurement experience in various roles working with multiple stakeholders domestically and abroad specializing in planning and developing strategic sourcing strategies and execution plans for all sizes and types of capital projects.

17 years experience in urea plant commissioning & operation

Experience in HTHP wells, SCR & VFD rigs, Experienced in oil based mud and horizontals.

Lead QA Engineer/Pipeline installation/Inspection and Expediting/Auditing

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr. data sheet, detailed ENG. of DCS,FGS,SDS, control logic, SAFE chart Commissioning -Elect& Instrum.

I am having Eleven years of experience in field of Electrical Engineering as a Planning & Estimation Engineer. I am looking for a challenging opportunity in field of Project planning.

I am an experienced Senior Petro-chemical Fire Officer currently employed by Sembcorp Utilities (UK) Limited with an interest in advancing my career with new challenges and experiences in Operational Emergency Response.

I have over ten (10) years of diversified experience in Planning & Scheduling, site supervisory ,quality control and other related engineering job on EPIC projects including Structural, process mechanical, mechanical piping, electrical, instrumentation, telecommunication and fire & gas systems.

Specialist in operating, supervising and managing all types of plants and facilities.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

To secure a Senior Contracts/Management related position within an internationally focused organization servicing the petroleum, mining, construction or telecommunications industry utilizing my negotiation, management and administration skills.

My experience goes trough a range of fifteen years in the Latin American Electric Service sector, most of them in a private Electric Utility with operations in Venezuela, El Salvador and Colombia.

Project Procurement Manager

Run the Planning and Purchasing Department, including the Aircraft Material Planning, Purchasing, Repairing/Overhauling and Invoice/Data Verification, Aircraft Material Administration and General Consumable Material, to ensure the availability of the materials

20 plus years working in the Refining industry looking for estimating manager position

Expertise in contract guard services, training, communication, client relations, marketing, P&L, management, security systems, supervision, information exchange, Crisis Management Planning, liaison with various host government agencies, developing Policies & Procedures,

I am an experienced exploration consultant, advisor, manager, educator and research scientist. I have extensive experience in exploration play, prospect and basin risk analysis and in designing exploration strategy and organizational structure

International Chemical sales professional.

Chartered Accountant with CISA and CIA having more than 15 years experiance

PROJECT PLANNING, CO-ORDINATION, EXECUTION, ENGINEERING MANAGEMENT, ROTARY ENGINEERING (OIL, GAS, PETROCHEMICAL & FERTILIZER SECTOR)

Iam a BCOM graduate, Worked in Companies Like HLL, Essel Propack. My skills are basically Controlling of Inventory by proper stock accounting, Achieve dispatch efficiency 100 % negoiation with suppliers and transporters for better price on materials and freight.

Dear Sir, Since I am looking for an interesting job opportunity in line with the job recruitment that you have recently started, I have the pleasure to submit my Curriculum Vitae for your review. For the future I would like to work in a well-organized company in a position of planner engineer.

Bachelor of Commerce from Bombay University in April 1990

Oil and Mining PM PMP

Facilities Manager, Operations Manager, Coordinator, Purchasing Officer, Administrator with over 07 years experience in Camp Management, Hospitality, Catering, food chain and shipping industries with international exposure in the Middle East.

Mechanical Engineer with exp. in Project Management , Equipment Fabrication , Power Transmission Fabrication , Press Tools Designing

28 years in the engineering contracting, industry with experience mainly in the Materials and Management engineering field, for projects in the oil, gas, petrochemical and mining sectors.

INTERNATIONAL ENERGY, OIL, AND GAS INDUSTRY EXECUTIVE

Procurement Manager

Regarding Gas & LNG Systems, I have broad knowledge in the maintenance, operation, construction and commissioning for Gas compression, transmissions and LNG extraction, production, distribution and shipping plants gained in the different business units at Gov´t Oil&Gas Company.

A professional and experienced Petroleum Geologist having 25 years of varied experience in Upstream oil industry. Developed expertise in Basin modelling and Sequence stratigraphy, operations and administration . A team player can deliver results with best time mangement

Project Controls Job Seeker

I have excellent organisational and coordinating skills and have benefitted from a working not only in the public sector, but also the private sector, during the course of my post graduate and under graduate studies, even working in the Marine Oil Industry at Trinmar Limited, during under grad.

Experienced in key aspects of the upstream oil and gas industry ranging from field engineering design, fabrication, offshore installation to final pre-commissioning. Field engineering, Operations Engineer and then Marine Estimator in the EPCI Contractor for offshore facilities, T &I.

Project Cost Control - Planning/Scheduling/Cost Control/Estimating

MBA and graduate Electrical Engineer with over 19 years experience in Project Management of Oil & Gas / Steel / Mega power projects

Excellent client relationship, leadership and strong management aptitudes in service industry. 15 years of working experiences (8 years in management position) in oil & gas industry with multi-national organizations and international exposures.

30 yrs commercial experience in upstream petroleum; Tenneco Oil commercial manager Gulf of Mexico; Co-founder of Newfield Exploration (NYSE: NFX); Consultant to domestic, international, and national oil companies; BS geology MA business; excellent Excel/Monte Carlo project finance evaluations

Visionary and Enthusiastic style, team player with a winning attitude

Presently I am working in Petrofac as an Electrical & Instrument Engineer at Sudan oil field area with rotation of 5 weeks / 3 weeks. Looking for Planning / attending of maintenance, breakdown of power plant through ERP CMMS system, Carried out internal electrical safety audit for power plant, Manag

Free! I have been actively working in the oil and gas industry since 1996. I have experience with many different wells from shallow, deep, sour gas, heavy oil etc. I have strong leadership, communication and organizational skills. I believe in running a safe, efficient and structured crew.

Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.

Consultant, SAP (PM)

Experienced Piping Engineer onshore and refineries

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out