Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #8004
next resume »»
CONTACT INFORMATION:
View contact information...
Objective
Looking for a Looking for a Position related to the QHSE Activities within the Oil and gas Sector to build up on my previous Experience.
Personal Information
Marital Status Married
Military Status Finally Exempted
Nationality Egyptian
Date Of Birth May 22, 1971
Qualifications and Work History
Weatherford Services Free Zone - Egypt
QHSE Technical Assistant Maadi - Egypt April 2003 until Now
Responsible for the HSE activities beside Develops and implements quality assurance standards for all the Company Locations in Egypt, processes, and controls. Develops methods for inspection, testing, sampling, and training. Evaluates Service capabilities, Statistics and recommends improvements. Assist in developing quality assurance policies and procedures in addition to performing the Internal Audits.
HSE and Quality Control Assistant Maadi - Egypt April 2000 – April 2003
Document all current work processes within their area of responsibility and compile related records and documents into sequentially numbered Job Files.Assist assigned Supervisors as required with organizing pre-shop, in-process and outgoing inspectionsReview contents of the Job file to confirm that the product is in agreement with the customer's requirements and conforms to the established quality standards and specificationsEnsure that inspection records, control charts and maintenance records prepared or required by assigned Supervisors are maintained and accessible during the work process.Assist assigned Supervisors as required regarding equipment that requires calibration and that it is identified, documented and maintained according to specified standards.Assist assigned Supervisors as required regarding maintaining the clear identification of equipment and it's inspection statusAssist assigned Supervisors as required regarding receipt of and dispatch of equipment to and from customer locations.Coordinate activities of maintenance staff and the Supervisor to help ensure correct procedures are understood and followed.Report all non-conforming activities and equipment to the assigned Supervisor Compile quality feedback data and quality history sheets as requestedCoordinate with assigned Supervisors to help ensure that equipment is not allowed to leave the premises below the desired standardPerform other various duties assigned by supervisor within the physical constraints of the job.
Sahara Petroleum Services Company / Syria - SAPESCO
Quality Assurance Assistant Dier Ez-Zoor - Syria April 2000 – October 2002
-To assist workshop supervisors in the various processes involved in maintaining company equipment according to established Quality Assurance procedures and processes. -Process all necessary documentation as required by the Workshop Supervisors
CAM Supervisor Dier Ez-Zoor - Syria May 1998 - April 2000
* Responsibility is running the Computer make-up Analyzer (CAM) or the Power Tongs during the Completion, Casing and Bucking Operations. * Operate the Tubing and Casing Bucking Jobs in the Company or Client Workshops.
Core Eng. Dier Ez-Zoor -Syria March 1999 - April 2000
* Responsibility is running core jobs for SHELL Syria Development Department (SSDD), Al-Furat Petroleum Co. (AFPC), Dier Ez-Zoor Petroleum Co. (ELF) and Syrian Petroleum Co. (SPC) * Design the Core assembly and BHA (cooperation with the Client Rep.). * Assemble and disassemble the Core Equipments - CorPro Designs, UK. * Operate the Coring by the related Parameters. * Finalize the core recovery (cooperation with the Rig Site geologist). * Fully responsible for Coring Stock control & replenishment orders.
Contract Eng. Dier Ez-Zoor - Syria May 1996 - April 1998
* Responsibility was inspecting, assembly and disassembly the Hydro-mechanical jars [DJ6] and Shock Tools [ST5] -Cougar Tool Inc. Designs, CANADA. * Several W/S activities in addition to Following up the fishing tools redressing. * As well as structuring a computerized data base for AFPC Drilling Movable Equipment on Microsoft Accesses and continuously updated it according to Actual utilization.
P.G.S. Tensor Geophysics Middle East
Geophysicist Naser City - Free Zone Oct., 1995 TO April, 1996
* Seismic Data Processor, Passing through 2-D and 3-D data Processing Steps * Worked on INTEL IPCS 860 using UNIX Operating System (Specially in 3-D Marine Data), VAX 8650 using VMS Operation System, DISCO Package and Ovation System. * Writing the Status, Weekly Report and Time Line Sheets on the PCs by using Windows Programs.
SUNRISE Group [Custom Clearance Japanese Co.]
Cargo Operator Agoza - Giza March, 1995 TO Oct., 1995
Cargo Operator in both Export and Import Sections.
Agriculture Economic Researches Institute [AERI
Samples Operator Dokki - Giza October, 1994-Mar., 1995
QHSE Training Courses Attended Statistical Quality Control Egypt 2004
Auditor / Lead Auditor (attendance) Egypt 2003
Safe Start Algeria 2003
First Aid Egypt 2002
Emergency Response Syria 2000
Dehydration Case Syria 1999
NORM Syria 1999
H2S Syria 1998
Berthing apparatus Syria 1998
Defensive Driving Syria 1997
Handling and stepping Syria 1997
First Aid Syria 1996
Fire Fitting, Syria 1996
Language Skills Arabic: Mother Language. English: Capable of Business conversations. French: Capable of Simple Conversations and reading
Academic Qualifications Cairo University
Bachelor of Science - Geophysics Giza Egypt November 1994
ICL
MCP - Microsoft Certified Professional Giza Egypt March 2001
MCSE - Microsoft Certified Systems Engineer Giza Egypt August 2001
MCDBA - Microsoft Certified Data Base Administration Giza Egypt July 2001
Oracle DBA - Oracle Database Administrator Giza Egypt October 2001
Computer Skills Microsoft Office 2000 Programs (WinWord, Excel, PowerPoint and Access)[Expert]. Graphics and Designing Software (Adobe PhotoShop, Corel Draw and AutoCAD)[basic]. Visual Basic Programming Language (AUC)[Basic] HTML and Web Page Design (IBM)[Basic] SQL (ICL)
Coordination and Administration Assistance Skills * Planning maintenance programs in cooperation with the supervisor. * Following up the ISO 9000:2000 filling system. * Issuing the technical Reports regarding to Failures or complain points. * Material handling and rejection procedure implementation. * Following up the strict implementation of workshop safety policies and the personnel safety working attitudes. * Stock control, replenishment orders and Monthly Stock Status Reports.* Tool Movement documentation, Utilization records and Performance statistics.* History cards, Utilization records and Performance statistics.* Monthly Service Invoices and Operation Reports.* As if & when required personnel shift schedules and bonus / overtime control.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1951 to 2000 of 2552)
Go to Search Parameters...
Brief Description
I am having more than 3 years in Oil & Gas Refinery Field Constructions & I am worked as Materials Engineer, Engineering Coordinator, Planning Engineer & Now i am working as a Planning Engineer in GPS, Oman.
Excellent team working skills, Excellent negotiation skills, capable of working under pressure and meeting deadlines, high quality customer service skills, and high quality communications skills
Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.
Have some supervisiory and Electronic training
Experienced Administration analyst with areas of expertise in Strategic management, Finance, Logistics and supply chain, Contracts Administration, Business Administration along with latest british MBM degree in Business Management
Over 12 years of qualitative experience in Refinery, Oil/Gas and Petrochemical Plant.
I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model
Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR
International HR Manager
HSE Engineer with Quality experience, consultant, Mechanical Engineer
I have a comprehensive knowledge of Industrial Health,Safety &Environment with focus on Oil & Gas and construction industry safety, HSE Training, Inspection of facilities for proper HSE management system. Hazard & operability studies of Projects & sites' Job Safety Hazard Analysis & risk assessment.
Procurement Management, Project Manager, Expeditor, Logistics, Scheduler, Material Manager, Buyer, Purchaser, Contract Administration, Bilingual Spanish, Pricing and Biding, Quality Assurance
12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc
Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.
Procurement Purchasing Logistics Inventory Control Contracts Negotiations
Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.
I am a South African currently living in Ghana. I am looking for opportunities in Finance. I have extensive experience from working in Nigeria and Ghana.
Principal Consultant, BSc (Hons). MSc. DIC. 8 Yrs experience in Contaminated Land assessment and Remediation.
QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.
Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation
Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.
HSE advisor to the upstream oil & gas industry with 13 years experience in Australia, Russia, Nigeria and the Middle East.
Chemical Engineer with Environmental Engineering experience
Maintenance Planner - Mechanical Engineer
Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased
Senior Mechanical Engineer, Bachelor Of Engineering
Cwi/QA/QC Manager
Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.
Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.
Operations Manager or Shift Supervisor in a Power Plant
I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse
Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.
I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.
Master in mechanical engineering (ENIT)
I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.
Proposals & Contracts, Commercials, Process & Technologies, Project Management
Project Management / Engineering Coordination / Process Engineering / Business Development
CA, CIA, CPA
I am Commerce Graduate, Fellow member of ICSI (FCS) and Microsoft Certified Professional (MCP) with 13 years of work experience in Finance, Accounts, Company Affairs and Statutory Compliances.
Senior Instrumentation & Control and Telecom-SCADA Engineer
Instrumentation & Commissioning Analyzer Engineer
Innovative thinker with broad-based expertise in human resources, and business development.
Free!
DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE
In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.
Hardworking, easy learner,..... Bachelor of engineering in instrumentation
To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.
Financial Manager (expat)
20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.
I have a master degree in Chemistry and post graduates in International Law and Ecology. I have worked as an HSE specialist for more then 13 years.
Oracle Functional Consultant with over 10 years of experience in the Finance domain
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
[ 40 ]
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Management;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com