Resume - I am an experienced Structural Engineer with expertise in the analysis and desig...

Misco Jobs

Resume #80520

CONTACT INFORMATION:
View contact information...

DISCIPLINE Civil / Structural Engineering
POSITION/FUNCTION Lead Civil/Structural Engineer
Consulting Civil/Structural Engineer

QUALIFICATIONS: B. Tech. (Hon.) Civil/Structural Engineering (Upper-Second-Class) RSUST, 1997/1998
DATE OF BIRTH: 18th December, 1971
SEX: Male
MARITAL STATUS: Married
NATIONALITY: Nigerian
PROF. MEMBERSHIPS: Member, American Society of Civil Engineers (MASCE)
Corporate Member, Nigerian Society of Engineers (MNSE)
COREN Registered (R. 14,357 C.Eng)
SPECIALIST SKILLS &
COMPUTER LITERACY: Proficient in the use of SACS, STAAD.Pro, STA PILE3, Framework, Multi-frame 4D, GEOTEC Office, PC Sheet-pile Wall, PCASE 2.08 (Pavement Design & Evaluation Software) as well as other Geotechnical, Foundation and Civil/Structural Engineering software, Microsoft Word, Excel, Visio 2003, Project 2003, Power Point and Serif Photo Plus application software.

YEARS OF EXPERIENCE: 11 Years.

PROFESSIONAL WORK EXPERIENCE
SUMMARY EXPERIENCE (ONSHORE / OFFSHORE)
* Detailed Engineering Design of Offshore Jackets and Topsides.
* Detailed Structural Analyses and Design of Subsea Manifolds.
* Detailed Analyses and Design of Suction Piles.
* Installation and Lift Analysis of Decks and Appurtenances – analysis includes stress analysis of the Structures to check for, and eliminate overstressing of Structural members during lift and installation.
* Calculation of Weight and Center of Gravity of different Modules for Weight Control Program.
* Joint Punching Shear Analysis.
* Detailed Engineering and designs of Riser Clamps and Riser Guards.
* Detailed Engineering and designs of Platform deck extensions and appurtenances.
* Design of Bumpers and Guides.
* Pile capacity and Installation analyses.
* Pile Add-on Analysis and Pile Drivability Analysis.
* Design of Equipment skids, Foundations and Pipe Supports.

EMPLOYER: PLANET PROJECTS LIMITED (JULY 2008 – DATE)
POSITION: PROJECT MANAGER (Consultant)

EMPLOYER: POINT ENGINEERING LIMITED (MAY 2005 – JANUARY 2008)
POSITION: HEAD, CIVIL / STRUCTURAL ENGINEERING DEPARTMENT,
LEAD CIVIL / STRUCTURAL ENGINEER
TASKS ACCOMPLISHED AND RESPONSILITIES
* Senior Structural Engineer on the Bonga South-west /Aparo Define Phase Gas Export Project for Shell Exploration and Production Company (SNEPCO). The OGGS RP-A platform is a Shell platform located off the coast of Delta State in Nigeria. It is a gas gathering and production platform, which is part of the Bonga SW/Aparo Field Development. The overall purpose of the project was to increase production and pigging operations by the addition of a new 16" riser to bring gas from the Bonga FPSO and to receive pigging slugs. This platform supports no wellheads. The project involved amongst other discipline requirements, structural modifications of the following existing structures and topside facilities: main-deck, top-deck and access-deck framings as well as Riser supports at every underwater jacket framing level. I developed a new SACS model of the entire offshore platform structure, including the new deck extensions and new 16-inch riser, and performed the in-place structural analyses, structural arrangement design and member sizing, design of welds/joints and design of riser clamps and supports.
* Lead Civil Engineer on Produced Water Re-injection (PWRI) Project at Obigbo North flowstation for Shell Petroleum Development Company (SPDC) Limited. The primary Objective of the project was to prove the concept of Infield Separation and Injection of Produced Water using Compact Separation Technology in the Obigbo North (OBGN) Oil Field. This involved review of site condition, update of the as-built design, review of the SIEP supplied design package, and provision of detailed interface design to hook-up the various skids of the PWRI packages with the existing facilities and to enable homogenized installation of the skids, provision of appropriate structural foundations for the skids and supports for the routed piping as required and preparation of an Approved for Construction (AFC) package.
* Senior Structural Engineer for the Structural design of the Inlet manifold extension deck and piled substructure for the Santa Barbara FOD Project for Shell Petroleum Development Company (August 2006).
* Senior Structural Engineer on the ENANG 'A' External Slot Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was the addition of one external conductor (Enang 61A ), to accommodate a new well. The project involved the Design, Fabrication and Installation of a protective framework around the 61A external conductor. The structural design process involved incorporating the new conductor guard structure into the existing SACS global model of the Enang A platform and to assess the new overall loading during relevant storm events, and due to boat impact, the analysis and design of the proposed external conductor protective guard frame to confirm the integrity of the guard to absorb a moderate accidental vessel impact and anticipated environmental loads that would act on it in service, while ensuring that the external conductor, platform structure and process facilities are not compromised, structural arrangement design and member sizing, design of welds/joints and lifting and installation analysis.
* Senior Structural Engineer on the UBIT 'B' Internal Slot Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was to increase production at Ubit B by the addition of a new Internal Slot to accommodate one more wellhead. The project involved structural modifications of the following existing structures and topside facilities: main, cellar, sub-cellar and sump decks, jacket framing at elevation (+) 13ft. The structural design process involved the following: The existing SACS model for Ubit B platform was revised for structural modeling and conductor analysis of the Main deck, Cellar deck, sub-cellar deck, sump deck and top of jacket framing at elevation (+)13ft to ensure that these structures withstand the anticipated environmental, equipment, gravity and live loads that will act upon them in service, while ensuring that the platform structure and process facilities are not compromised, structural arrangement design and member sizing and design of welds/joints.
* Senior Structural Engineer on the UNAM 'A' Internal Slots Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was to increase production at Unam 'A' by the addition of two new Internal Slots to accommodate two more triplex wellheads. The project involved structural modifications of the following existing structures and topside facilities: main, cellar decks and jacket framing at elevation (+) 13ft. The structural design process involved the following: The existing SACS model for Unam 'A' platform was revised for structural modeling and conductor analysis of the Main deck, Cellar deck, and top of jacket framing at elevation (+)13ft to ensure that these structures withstand the anticipated environmental, equipment, gravity and live loads that will act upon them in service, while ensuring that the platform structure and process facilities are not compromised, structural arrangement design and member sizing and design of welds/joints.
* Project Engineer on UBIT 'H' Gas Lift Project for Mobil Producing Nigeria Unlimited (MPN). I played an active role in ensuring that the Project schedule was maintained and project information was transmitted to all concerned parties. I also oversaw the activities of the Document Controller and ensured that documents are transmitted to the Client as at when due and also issued the safety statistics report generated by the Safety officer as well as kept track of Project Man-hour usage and developed Project Progress Reports.
* Lead Structural Engineer on the MPN Critical Pipeline segments replacement project which constitutes a subset of MPN Integrity Projects (MIPS) been progressed for execution by a predetermined contracting strategy.
The purpose of the project was to restore functional integrity of main Crude Trunklines from JV production fields, intrafield gathering pipelines and secure supply to the process facility at Qua Iboe Terminal (QIT).
The scope of work included all necessary verification / assessment of the existing specified pipeline on the Asabo, Usari, Idoho platforms, Ubit Sub-Sea Manifold (SSM) near Idoho, QIT flanges for in-coming Idoho and Ubit product pipelines Specifically, the structural scope of work included evaluating the feasibility of installing the new riser before removing the existing riser to minimize production downtime, Provide concept design for any top- side tie-in modification including instrumentation and electrical requirements, Assess Intelligent Pigging facility requirement on each platform ( footprint, lifting mechanism, and congestion).
* Lead Structural Engineer on the MPN Phase II Gas Cap Gas-Lift Project. (Ubit GE, Enang B and Ubit GJ Gas Cap Gas Lift Project), responsible for the execution of the structural scope which included determining the structural work requirements for the gas lift skids.
* Lead Structural Engineer on the Shell Petroleum Development Company (Nigeria) Nembe II Remote Field Manifold Installation Project responsible for the execution of the structural scope of the project which entailed structural analyses and design of Remote Field Manifold Platform as well as the geotechnical/foundation analyses of the substructure.
* Senior Structural Engineer on the Addax Adanga Complex Engineering Studies and Detailed Design Project.
The purpose of these studies (de-bottlenecking and platform modification) was to provide data for company to use the existing ADPP and sister MOPU to handle the increase in production and gas compression interface. The required engineering studies and detail design was for
* The removal of certain equipment and bulk material
* The refurbishment of certain facilities on ADPP
* The addition of certain facilities on ADPP.
* The transfer of control of ADPP to the TPU (Borgen Dolphin)
* The evaluation of the TPU for a classification change to a fixed structure and to evaluate the cathodic protection requirements for the Adanga Production Platform (ADPP). This involves Structural Analysis and Integrity of the TPU of the TPU according to the API RP 2A.
* Adanga Complex SIMOPS & HAZOP.

Responsibilities Performed as Head of Department, Civil/Structural Engineering

OVERALL OBJECTIVE: To ensure the satisfactory performance of the Department and implement any necessary action to maintain the standard of work and performance by the discipline engineers.
Technically responsible for the performance of all work the discipline engineers undertake within both the Department and Project Task Forces.

REPORT TO: Engineering Manager
RESPONSIBILITIES:
* Lead and co-ordinate the Department in a professional and responsible manner with respect to both the Client and Company requirements.
* Ensure that the Department resources are sufficient to resolve all technical engineering problems, whilst maintaining sufficient efforts to achieve positive economic results.
* Report weekly to the Engineering Manager the activity status, resource utilization and total status of the Department and other necessary information.
* Provide the Quality Assurance Manager and the Engineering Manager with evidence that the specified standards/requirements/regulations are implemented, and that all Department work is checked as required.
* Responsible for the quality of all Department work.
* Carry out interdisciplinary checks as required and implement or initiate the necessary action in the event of non-conformance with specified requirements.
* Propose standards where these are missing or unavailable.
* Delegate tasks among the Department personnel.
* Approve timesheets and travel cost for all personnel within the Department.
* Ensure the optimum utilisation of the Department personnel to provide appropriate professional challenge and satisfaction and to further enhance individual qualifications by the use of additional training and external courses where necessary.
* Ensure that other Departments are informed of all aspects of the work that may affect them.
* Participate and involve the Department personnel in the preparation of proposals.
* Co-operate fully with the leader of a project (Project Manager or Project Engineer) where my Department is involved.
* Comply with the responsibilities in accordance with prevailing Company Procedures.
* Participate in project activities and other Department duties, as far as these can be combined with my duties as Head of Department.

EMPLOYER: RIVERS STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY, P.H., NIGERIA (DEPARTMENT OF CIVIL ENGINEERING) (JULY 2001 – MAY 2005)
POSITION: GRADUATE ASSISTANT
RESPONSIBILITY: TEACHING ASSISTANTSHIP

DUTIES
My duties included teaching assistantship in Structural Analysis and Design, Geotechnical and Foundation Engineering Courses at 300,400 and 500 levels of the Undergraduate Programme. I also participated actively in the consultancy services rendered by the Department to Industry.

CHALLENGIES AND SOLUTIONS
The prime challenge in discharging my teaching responsibility entailed effectively training young undergraduates in the science and art of structural analysis and design. To accomplish the above objective, I always ensured that the students develop the mental ability of appreciating structures in three dimensions so as to have a mental and physical feel of 3D forces and moments acting on a structure and the resulting stresses and strains induced in the various members of the structure. I emphasized and taught them QUALITATIVE STRUCTURAL ANALYSIS as the foundation on which QUANTITATIVE STRUCTURAL ANALYSIS and subsequent structural design is based.

PROJECT CIVIL / STRUCTURAL ENGINEER: OCTOBER 2001 – Date (Part-time)
GTI CONSULT, PORT HARCOURT (Nigeria)
Responsible for Civil/Structural Engineering design aspects of various projects (see below):
* Structural design of Jetty and Sheet-pile walls at Alakiri Gas Station for Shell Petroleum Development Company.
* Structural Design and Supervision of Construction of Crane Gantries and Foundation structures for Dresser-Rand Nigeria limited at the St. Clair facility along PH/Aba Road, Port Harcourt.
* Structural Design of A8/A9 Building at Shell Industrial Area, Port Harcourt for SPDC.
* Structural Design of several High storey and industrial buildings.

PROJECT ENGINEER (CIVIL): MARCH 2000 – JULY 2001
RIMAZ ISA ASSOCIATES, PORT HARCOURT (Nigeria)
* Structural design and supervision of construction of Jetty, Ramp, Shore-protection facilities, Hostels and Library at the Niger-Delta University Project, Bayelsa State.
* Contract Administration
* Quality Control of construction works

PROJECT ENGINEER, (NYSC): FEBRUARY 1999 – FEBRUARY 2000
FEDERAL MINISTRY OF WORKS & HOUSING, PORT HARCOURT (Nigeria)
* Supervision of construction of 2 Fly-over Bridges along PH/Aba road at Kaduna and Rumuola Junctions, Port Harcourt by Messrs Julius Berger Nig Plc
* Supervision of construction of Eleme-junction/ Onne road and Overlay rehabilitation by Messrs Julius Berger Nig Plc.
* Structural Integrity checks and evaluation of Choba Bridge along East-West road, Port Harcourt
Private Consultancy
1) Structural design of 2 x 18m span Precast Reinforced Concrete Bridge, Enugu State, Nigeria, March, 2008.
2) Structural design of Workshop and Warehouse Building for 400MW Gas Turbine Power Plant at Alaoji, Abia State for Niger Delta Power Holding Company of Nigeria, December 2005.
3) Structural design of Administration Building for 338MW Gas Turbine Power Plant at Egbema, Imo State, for Niger Delta Power Holding Company of Nigeria, October 2007.
4) Structural design of Central Control Building for 338MW Gas Turbine Power Plant at Egbema, Imo State, for Niger Delta Power Holding Company of Nigeria, October 2007.
5) Structural design of Switchyard Control Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
6) Structural design of Fire Station Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
7) Structural design of Canteen Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
8) Structural design of Guard House Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
9) Structural design of Administration Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
10) Structural design of Central Control Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State, for Niger Delta Power Holding Company of Nigeria, February, 2008.
11) Structural design of Switchyard Control Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
12) Structural design of Fire Station Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
13) Structural design of Canteen Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
14) Structural design of Guard House Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
15) Structural design of Administration Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
16) Structural design of Central Control Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State, for Niger Delta Power Holding Company of Nigeria, March, 2008.
17) Structural design of Switchyard Control Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
18) Structural design of Fire Station Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
19) Structural design of Canteen Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
20) Structural design of Guard House Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
21) Structural Design of the Information and Communication Technology (ICT) Centre Buildings and works at Ogbogu, Ogba/Egbema/Ndoni Local Government Area, Rivers State for the Niger Delta Development Commission (NDDC), November 2006.

HOBBIES:
Reading, Traveling and Singing (Classical and Gospel).

REFERENCES:
To be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 2550)

Go to Search Parameters...

Brief Description

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

I am working in oil, gas and offshore projects and plants from 14 yrs in india, middle east and europe for multinationals for erection, commissioing and projects.

AM Fabrication Engineer with CSWIP W/I 3.1,European Welding Inspection Practitioner, International Welding Inspector with ASNT level II in MPT,DPT,RFI,UTG having around seven years of experience in ndt/inspection of Oil&Gas Installations both Onshore/offshore.

Recent MBA graduate from Le Moyne College, Syracuse, NY and has a 4 years of experience as a civil engineer. Wants to have a career change working at petroleum/oil/gas industry and willing to relocate and travel.

A business-savvy finance professional with thorough knowledge in Financial Management. Experience in oil and gas accounting and refinery economics. Substantial knowledge in derivative instruments and accounting for options and futures. Expertise in design of profit projection simulation models.

Onshore/Offshore Medic,very experienced medical doctor with long years of medical service

I am presently in MNC around Mumbai as an Junior Safety Officer. I have 8+years relevant experience in Industries like Pharma, Perfumery, Speciality Chemicals, Mettalogical and Fiber Glass. My job profile is to provide scheduled Training to companys employees (300 in No.)

Mechanical Engineer with experience in Contracts Administration; General Services Coordination; Procurement - Warehouse; QA Coordination, in Oil Industry.

Develop technical specification, guidelines, procedures, etc. that are practical to be applied as Company's standards in order to control the expected quality, performance and efficiencies. Resolve technical and quality issues pertaining equipment performance & problem.

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Precom & Com Specialist - System Completion - Instrument & System

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

15 years Domestic and International Management experience. B.Sc. Mining Engineering.

My fourteen years of experience have provided me with a broad range of relevant skills and I am confident that those would be successfully utilized in a new office manager position.

An experienced Manager with Expertise in the Establishment of Various Client and Industry Specific Databases with an emphasis on Staff Training, Security, Storage, Sorting, Manipulation, Distribution and Archiving of information and data for a diverse variety of clients. Experience gained in infor

Emergency Officer with the experience of 10 years in safety and emergency management .

SAP, Project Management

I am an experienced Structural Engineer with expertise in the analysis and design of both onshore and offshore facilities. I have excellent proficiency in the use of SACS software for the analysis and design of offshore structures. I have a Bachelor of Technology Degree in Civil Engineering.

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

International Project Manager

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

Project Management in Chemical turnkey consultatnts, Master degree in Chemical Plant Design from REC Karnataka, India with Distinction.

7 years of experience in SalesMarketing-Oil industry. Highly self-motivated and results driven. Excellent communication and inter-personal skills. Ability to present advanced technical material. Experience in WellTesting interpretation soft (Kappa, Sch) and in Economic Evaluation applic. (GeoQuest).

I have thirteen years of experience in the petrochemical, food and cement manufacturing industry. I was responsible for the reliability, maintenance, engineering and management process improvements of fourteen manufacturing plants through out the United States of America and Egypt.

I prefer a work much affiliated in my capability like supervising people, handling clerical work and other business related jobs that will enhance my skills. I am also interested in jobs related to oil drilling.

IIT Chemical Engr with 23 yrs exp in Sales & Marketing of Downstream Petroleum & Petrochemical Products in Fortune-500 Oil & Gas Company

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

17 years of legal work experience as DA, Chief Judge, Legal Advisor and part time professor

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

Good understanding of Accounting Principle,Excellent problem solving skill and leadership qualities,Good knowledge of Accounting Package , Microsoft Word and Excel.

Drilling Safety Manager/ Operational Safety Trainer Land Based Drilling

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

I have degree in Business Administration with Customer Service, Administration and IT Skills. I worked in gas distribution and transmission compnay for more than 10 years. Presently I am working as Admin Manager s in Phones4u UK. I started as Store Admin in August 2005 but got promoted afterwards.

Senior Primavera 6.2 Planner / Scheduler or Management Skills

MBA-FINANCE AND MECHANICAL ENGINEER WITH 2 YEARS EXP IN CHEMICAL INDUSTRY AND 1 YEAR IN BANKING INDUSTRY

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

Well Intervention, Well Services, Field Well Completion,

NDT Resume

PLANNING/SCHEDULING ENGINEER & BACHELOR OF ENGINEERING (CIVIL)

Drilling & completion fluids engineering senior engineer and management

HSE Specialist

Project HVAC Engineer / Management - HVAC – Onshore Offshore and FPSO Estimating - Mechanical Product Development - Business Development -Engineering & Design (Weight control). - Land Surveying - Contracts Engineer/Administration - Cost Engineer

A multi-skilled mechanical/piping, Construction Superintendent/manager, QA/QC Engineer, with over 20 years international experience in the oil, gas, petro-chemical and power generation industries

It is with great interest that I am forwarding my resume for your consideration. My record of academic achievements and professional career history, demonstrates attributes that make me a valuable employee.

HSE superintendent in drilling and work over onshore rigs in Algeria over 30 rigs and one in omane

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out