Resume - FABRICATION MANAGER with 34 years’ experience in Heavy Engineering Manufacture/C...

Misco Jobs

Resume #81633

CONTACT INFORMATION:
View contact information...

British
Born 19th January 1949
Married
Good understanding of Italian
Pilots Licence - fixed wing aircraft

========PROFILE============================================

A HIGHLY MOTIVATED AND RESOURCEFUL MANAGER with 33 years extensive experience in Heavy Engineering Manufacture / Construction for the Oil / Gas / Petrochemical / Desalination / Power Generation industries (both onshore and off-shore markets in the UK, France, Italy, Poland, Netherlands, Middle East, West Africa and India) who offers:

* Safety awareness – that remains the number one objective at all times.

* Management of all aspects regarding large manufacturing facilities / construction.

* Experience of multi-national workers / staff / clients.

* Team strengthening / motivation through self-development / training on technical/ business objectives.

* The ability to establish, maintain and monitor management control systems.

* Preparation / review of work scopes and review of contracts.

* Management of Contracts / Contractors / Sub-Contractors from proposal through to commercial closeout.

* Committed to Quality Assurance / Quality Control with the objective: "get it right first time".

* Planning, organising and coordinating flair.

* Proficiency in contract business administration (including report writing).

* The ability to contribute / communicate at all levels.

========STRENGTHS==========================================

* Ensure adherence with schedule / budget / safety / QA / QC specifications and standards.

* Able to operate with details at shop floor level and make positive contributions to strategic debate.

* Clear understanding of control / discipline; i.e. use of correct mode to achieve intended objectives.

* Negotiate to maximise commercial advantage whilst maintaining a 'win-win' scenario for all parties.

* Adept at maximising productivity and efficiency to ensure delivery of a 'fit for purpose' end product.

* Develop committed teams to produce exceptional performances in arduous conditions / time constraints.

========COURSES============================================

2004/5* Chevron ("Remember Charlie" - JMJ) Incident & Injury Free (IIF) Safety Training

2001* BVQI B.V. VCA Basic Safety SCC & CCvD-VCA Version 3

2001* Safety for Managerial Staff SCC 10-03-2000 – PS Logbook No: P1579412001

2001* Offshore Safety Induction & Emergency Training Course O.P.I.T.O. approved

1987* CSWIP Certification – Reid Kerr College

1986* The Effective Manager (P670)– Open University

1984* Management Training – Employee Development Assoc.

1979* 3-month NDE familiarisation – Highlands Fabricators Limited

1974/5/6* Fabrication/ Welding/ Surveying Courses – Highlands Fabricators Limited

========CAREER HISTORY=====================================

2008-on Isleburn/ Global Energy Group

Fabrication Facility General Manager - Angola

Saudi Arabia

* Hired specifically to set up and the general management for and on behalf of SUBSEA 7 GROUP's new fabrication facility within the SONILS base in Luanda including the further training of Angolan nationals.

2006-on Hidada / Xenel Group

Project Manager – Facilities Development

Saudi Arabia

* Conceptual design of green field heavy process equipment manufacturing facility and separate green field offshore fabrication facility. The preparation of detailed Cost Schedules and feasibility studies for both the proposed new developments.

2005-06 QG3&4 JADT (Qatar Petroleum/ Conoco Philips/ Shell):

Company Site Representative

UAE

* Represented / oversaw Company's interests during the construction of the Qatargas 3&4 Wellhead Platforms 7/8/9 Jackets and Piles.

2004-05 CHEVRON CORPORATION:

Company Site Representative

West Africa

* Represented / oversaw Clients interests during the construction of the Benguela Belize, Lobito Tomboco and other project structures.

2002-04 SBM SINGLE BUOY MOORINGS INC:

Client Rep / Site Manager

Italy, Middle East & Africa

* Deployed in Italy, Middle East & Angola to manage company interests during the construction phase of FPSO modules, C.A.L.M. buoys and other SBM designed products.

2001-02 GLOBAL HIGHLAND MANAGEMENT SERVICES:

Project Manager

The Netherlands

* Deployed for the construction of fast-track offshore structures and to maintain / enhance the interests of GHMS and its Client base.

2000-01 BELLELI ENERGY:

Project Manager

Italy & UAE

* Managed various construction contracts for Belleli Energy.

2000-00 GULF STABILIZERS INDUSTRIES:

Construction Manager

Saudi Arabia

* Managed interests of the Owner and Client at the Construction Site plus managing the EPC Contractor's performance against the Contract Terms / Conditions.

1999-00 ZAMIL STEEL INDUSTRIES:

Project Manager

Poland, Eastern Europe

* Managed the erection of a large Distribution Centre (overall 10.4 hectares) for Zamil Steel and their Clients (GSE of France/ Pro Logis of the USA). Responsible to Zamil Steel Corporate for the overall management of the Main Contract with Client and managed performance of the Polish Sub-Contractor.

1997-99 SAIPEM ENI GROUP:

Project Manager

Italy, UAE, Saudi Arabia & India

* Oversaw fabrication of the 'Jamnagar' Berthing Facilities (28,000 tonnes) and managed the five Sub-Contractors' performance along with the Commercial / Technical aspects of the Contracts.

1997-97 LEWIS OFFSHORE LIMITED:

Fabrication Manager

United Kingdom

* Headhunted by the Company's MD and major shareholder. Managed all aspects of fabrication, erection, load-out work for and on behalf of Saipem / ELF ('Elgin' & 'Franklin' Jacket structures and Piles).

1995-96 BELLELI SAUDI HEAVY INDUSTRIES ( BSHI ):

Project Manager

Saudi Arabia

* Initially appointed to the position of Planning Manager responsible for the re-organisation and optimisation of the Department's resource / systems.

* Managed the Ras Tanurah Refurbishment Project in conjunction with Bechtel London & ARAMCO, KSA.

1992-95 BELLELI SAUDI HEAVY INDUSTRIES ( BSHI ):

Workshop / Construction Manager

Saudi Arabia

* Reported to the Manager of Factories (Belleli Middle East). Managed all aspects of fabrication and construction within two self-contained satellite factory units for the fabrication / installation of chemical plants, heat exchangers, pressure vessels, high pressure piping, air coolers, evaporators, offshore jackets, modules decks and structural building. Ensured day-to-day efficient management and P & L of the two factory units 1,000,000 man hours (peak) per annum.

1991-92 BELLELI SAUDI HEAVY INDUSTRIES ( BSHI ):

Fabrication / Construction Superintendent

Saudi Arabia

* Reported to the Workshop Construction Manager for all activities in a self-contained satellite factory unit. Responsible for day-to-day efficient management and P&L of factory unit 850,000 man hours ( peak ) p.a.

1988-91 BROWN & ROOT HIGHLANDS FABRICATORS LIMITED:

Area Manager / Construction Manager

United Kingdom

* Responsible for the planning, resourcing and construction of projects for the North Sea offshore oil and gas industry on an all trades basis. Controlled Sub-Contractors and sub-contract works, with overall responsibility for the general management and cost control of the area. Implemented 'change', personnel development programmes, plus in-depth reporting systems. Total commitment to Quality Assurance and Quality Control ( 'get it right first time' ) along with Loss Control and Industrial Relations.

1981-88 BROWN & ROOT HIGHLANDS FABRICATORS LIMITED:

Section Manager / General Foreman

United Kingdom

* Managed activities on an all-trades basis; responsible for quality, productivity, efficiency, safety and IR.

1977-81 BROWN & ROOT HIGHLANDS FABRICATORS LIMITED:

Fabrication / Piping / Welding Foreman

United Kingdom

* Responsible for quality, productivity and safety. Seconded for a 3-month period to Brown & Root QA/ QC Dept (France) for the management / inspection / certification of Shell Fulmar 'A' leg pile clusters.

1976-77 BROWN & ROOT HIGHLANDS FABRICATORS LIMITED:

Leading Hand / Surveyor

United Kingdom

* Calculations / line / level / alignment, survey work ( structural / civil ) plus final 'as-built'.

1974-76 BROWN & ROOT HIGHLANDS FABRICATORS LIMITED:

Fitter / Fabricator / Technician

United Kingdom

* Worked as expediently as possible, without detriment to quality and safety.

========PROJECT EXPERIENCE=================================

ADWEA UAE:
* 3 Multi-Slash Desalination Units (2,700 tonnes)

AMOCO:
* Arbroath Jacket (440 tonnes)
* Cats Lomond Jacket (500)
* Cats Everest Jacket (480)
* Cats Riser Jacket (350)

BECHTEL & RELIANCE Berthing Facility (28,000 tonnes)
Comprising
* 11 jackets,
* 11 steel and concrerte decks
* Port Operations Control Building
* Service Deck Modules
* 77 Approach & Jetty Pipe rack/ Roadway Bridges
* piled bents
* Piles (driven)
* Pile caps
* Mooring / breasting Dolphins,
* Pipe racks
* Major catwalks

BNOC:
* Nigg Oil Terminal Berthing / Mooring Dolphins (600 tonnes).

BP:
* Forties Jacket (17,000t)
* Magnus Jacket(40K)
* Miller Jacket(16K)
* SE Forties (8,500) & module support frame.

CHEVRON:
* Alba Jacket (14,000t)
* Ninian North (13,000t), Deck, Deck Trusses and Wellhead Module
* Ninian South Jacket(21,000t)
* Ninian Central Generator Skids with Turbines & Generation Equipment.
* FPSO Kuito 'A' Product Processing Modules
* Benguela Belize Compliant Tower Levelling Frame, Piles, Risers, PLETs, Pig Launchers, etc.
* Lobito-Tomboco Subsea Production Manifolds, Subsea Gas Injection Manifolds, PLET's.

D.E.W.A UAE:
* 3 Multi Flash Desalination Units (4,500 tonnes) Multi Flash Desalination Units; Brine Heaters etc (12,000 tonnes)

ENI:
* FPSO Mystras V, Product Processing Modules (pre hot-work activities).

ESSO/EXXON:
* 7,500 tonnes Jacket,
* FPSO Eagle FPSO Modules
* Kizomba 'A' Deep Water CALM Buoy.

FOSTER WHEELER:
* Singapore Aromatics Vessels / Columns and Heat Exchangers.

GULF STABILIZERS INDUSTRIES KSA:
* Antioxidants Plant: Physical Forms manufacture with in-house base chemical production.

GSE FRANCE PROLOGIS USA:
* Distribution Centre: two warehouses extending to 5.3 hectares each.

HAMILTON BROS:
* Indefatigable Jacket (470t)
* Leman Jacket (340t)
* Ravensburn Jacket (1,200t) & Deck Modules.

MAERSK:
* Tyra Jacket (1,100 tonnes),
* Halfdan Jacket (3,500 tonnes) Construction methodology.

MARATHON BRAE 'B'
* Flare Jacket
* Flare Stack
* Inter platform access Bridge (140 metre),
* Module Support Frames
* various Modules 250 – 3,400 tonnes.

PETROCHEMYA:
* Olefins Furnaces/ Vessels/ Columns and Heat Exchangers.

QAFCO Qatar:
* Urea Plant Vessels/ Columns and Heat Exchangers.

QATARGAS 3&4 JADT (Qatar petroleum/ Conoco Phillips/ Shell)
* Wellhead Platform Jackets WHP7 WHP8 WHP9, Temporary Decks (3,600t) and Piles (3,300t)

SHELL:
* Eider Jacket (20,000t),
* Fulmar 'A' Jacket(12,500t),
* Sole Pit 'PT'Jacket (920t),
* Sole Pit 'PW' Jacket (1,200t),
* Sole Pit 'PB' jacket(910t)
* Sole Pit Wellhead Deck.

STATOIL:
* RP 2 Jacket (7,000 tonnes)

S.W.C.C.
* Multi flash Desalination Units (6,000t), Power Generation, Gas Turbine Exhaust Systems.

TOTAL/ ELF:
* Elgin Jacket (3,300t) & Piles (300t)
* Franklin Jacket (3,500t) & Piles (300t).

YANBU G.O.S.P. Berthing Facility
* Pipe racks/ Roadway Bridges
* Berthing & Mooring Dolphins etc.

YANBU MEDINA:
* Multi Flash Desalination Units
* Power Generation Waste Heat / Exhaust Systems.

========OTHER PROJECTS / CLIENTS===========================

* ABB
* BROWN & ROOT
* IBN SINA
* CHIODA
* FLUOR DANIEL
* LUMMUS
* SADAF
* IBN HAYYAN
* LUBEREF
* SAFCO
* SNAMPROGETTI
* MITSUI
* SWCC
* TOYO & YANPET
* MITSUBISHI
* SAMAD
* WEIR / WESTGARTH
* et al

Referees supplied upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 2547)

Go to Search Parameters...

Brief Description

PROFESSIONAL OBJECTIVES Senior Drilling Engineer- Drilling Superintendent Houston / Overseas Assignments and Rotation Wide range of drilling experience in Well Planning / Engineering and Operations / Offshore and Onshore / Domestic and International.

Thirty years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems.

Please see my attached Resume. As you will see I have a wide range of experience in Valves, Controls, Regulators, Rotating Equipment.

Mathematics BS.C English Arabic bilingual Experience in large civil and oil-gas projects. Logistic, accounting, environmental and general supervision.

My strength is in rig management and in particular jack-up rigs in the international market. In excess of twenty years diversified experience in execution and management of drilling and workover operations worldwide onshore and offshore operations.

MBA with comprehensive experience in oil and gas industry; strong skills in project management and business development; good communicator and outstanding interpersonal and leadership skills; Canadian citizenship

I am a Commissioning \ Construction \ Hook Up Manager with 27 years experience in the Oil, Gas and Power Industries.

Operation rig manager for drilling rigs onshore and offshore.

A Professional Engineer with more than 27 years oil & gas experience. P. Eng Status current

Talented and accomplished Management professional with strong background in logistics, materials management, and business development. International expertise in coordinating materials and logistics operations, including shipping, imports/exports, duty/customs functions, procurement.

I have worked in the Oil and Gas / Petrochemical industry for the past twelve years. I have extensive knowledge of both offshore and onshore risk reduction methods in upstream and downstream processes

Skilled administratrator managing very large teams of engineers, blue collars, and white collars

Sales and marketing professional with a proven track record of achievement in leading and managing a seasoned, high performing, global sales team.

A well rounded Petroleum Engineer with 27 years of diverse experience including work-overs, international supervison, field engineering, reserves, reservoir simulation and cryogenics.

PROFILE: Filipino CPA and MBA with 15 years of experience in the fields of audit, finance and accounting

Free! A highly motivated professional who excels and thrives on challenging work. Self-managing; results oriented – used to working under pressure, with the ability to prioritise work tasks and meet deadlines. Excellent communication and organisational skills, and leadership qualities.

Excellent communications skills, having worked with many groups of people who spoke little, if any English. Highly motivated individual with 29 years experience in the oil and gas industry.

Approximately 25 years within offshore and onshore Oil, Gas and Power generation construction engineering environments. Developing into a more specific Health, Safety and Environmental management capacity concentrating on Safety in Design and Construction, HS&E development (Projects

Experienced Health & Safety Manager/Officer. Experienced Mechanical Engineering Technologist. Experienced Power Engineer.

Mechanical engineer and safety engineer diplomas , I’m looking for a safety position in an oil and gas company worldwide ....available , and able to relocate , preference Africa and Middle east ( UAE, Saudi Arab , Brunie, Qatar, Kuwait , Algeria ...) ,

Seek position as a maintenance superintendent in the mining field.

A very experienced professional in the oil industry (20 years in Cabinda, West Africa),with over 20 years of experience in various aspects of Purchasing, Traffic, Logistics, Warehousing and Information Technology.

I AM INTERESTED IN A POSITION INVOLVING MATERIALS/INVENTORY OR WAREHOUSING. I AM WILLING TO TRAVEL OR ACCEPT A POSITION OUT OF THE USA.

Experienced onshore/offshore subsea installation and construction manager

Commissioning Manager/Operations/Construction

Current Objective: To be considered for a responsible positions such as, but not restricted to, a Plant Manager or an O&M Superintendent on an international energy project in the petroleum and/or utility sectors. Remote locations and short assignments considered.

I have 22 years experience in the oilfield I have drilled for 7 years pushed tools for 2 years and have been a directional driller for the last 2 years. I have app. 12 years overseas work and 3 years offshore.

16 years experience in gas distribution, wet utilities, general construction site work and excavation 25 years experience in oil & gas pipeline and plant construction. Dependable, self-motivated, organized, accurate and very detailed, hard working and results driven

To obtain a career in supervision or management with a growth oriented organization that will allow me to utilize my expertise in the areas of retail or safety management and administration.

very familiar with the relationship between gas drilling, gas production and gas end user

Businessman nearing 10 years of various downstream oil/energy experiences. Created new money streams and expanded business exposures. Dynamic manager with exceptional profit building skills within operating oil trade and retail chains, consulting and instigating strategic business alliances.

A challenging position as a Mechanical Engineer where I can effectively utilize my engineering & personnel skills gained through Eleven years of experience

Free! A motivated self starter and team player/builder with 30+ years of Canadian and International upstream oil industry experience. Skilled project manager and problem solver. High level of computer literacy.

I have an engineering management degree and currently in an MBA program , I will be through this quarter. Am very proficent in MS project tool, MS office tool, minitab

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

A professional with 13 years experience in O&G in diverse areas worldwide (7 countries, 3 continents) seeking to be part of a dynamic team with multidisciplinary skills and competitive environments. Extensive international knowledge in: Management, Operations, Marketing, Training, Quality.

Currently, attending MBA (oil and gas management) program, at University Of Dundee. Marketing and management skills are core subjects. Ten years of experience in the chemical process industry. terminals operations. Good communication skill and computing knowledge.

Experienced hands-on person, who has worked in GOM, Asia, Middle East, Africa, and Canada. Managing and Optimizing of Multi-Million Dollar Inventories both onshore and offshore.Trained in multiple Procurement/Maintenance Management software systems.

I have over 13 years experience within various safety environments with varying responsibilities.

FABRICATION MANAGER with 34 years’ experience in Heavy Engineering Manufacture/Construction for the Oil&Gas/Petrochemical/Desalination/Power Generation industries (both onshore and off-shore markets in the UK/France/Italy/Poland/Netherlands/Mid-East/West Africa

Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.

Material man managment, purchasing and requesting, inventories, receipt and return process

A Site Area Manager presently on an overseas assignment with over 25 years of experience, a broad background in site construction, project management and contract administration. Highly developed people skills, interfacing with vendors, clients, owners and virtually all project stake-holders.

Free! field engineer possess floor and field experience in heavy gas turbine engines such as General Electric different model (GE Frame 5, 6, 7 and 9), Rolls Royce, Siemens and Mitsubishi.

Expertized in Project management, Implementaion of Policies and Proficient in MS Office, Completed MBA(Management Information System)

I am a conscientious, reliable and hard working person, capable of fulfilling responsibilities, following instructions accurately and working under pressure to tight deadlines. I get on well with other people and I am a supportive team player. I have 11 years extensive experience of working in accou

30 + years in Security and Law Enforcement. Extensive management experience having worked in several positions throughout the world

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

Master of Science Civ. Eng. - Contracts/Subcontracts Progress Monitoring, Management & Administration; Pre-Award & Post-Award Contracts Activities; Contracts Commercial & Financial Matters, Invoicing, Change Orders, Claims; ITT, Biding, Evaluation Reports, Recommendations,

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out