Resume - Project Engineer Subsea (Oil & Gas)

Misco Jobs

Resume #83661

CONTACT INFORMATION:
View contact information...

EDUCATION
* BEng Mech (Honours) 1999, University of Limerick, Ireland
* National Diploma (Distinction) in Construction Management & Contract Administration 2002, Cork Institute of Technology, Ireland.

PERSONAL INFORMATION
* Marital Status: Married (no children)
* Nationality: EU Passport - Irish
* VISA Status: Australian PR
* Date of Birth: 22nd April 1977

CAREER SUMMARY

10 years experience in design and construction projects for the Oil and Gas and Pharmaceutical industries in disciplines of project management, Offshore Construction planning, execution and control, Estimation and Pricing, Field Engineering and Design support for Submarine Pipelines, Umbilicals and subsea facilities.

My current assignment is as Subsea Project Engineer for Nexus Energy (owner / operator) on the Longtom Offshore Gas Development Project. I have been involved with the project from FEED to installation and pre-commissioning works including mobilisation of DP2 offshore spread for umbilical lay, diving, ROV works and pre-commissioning.

My responsibility included the role of offshore Company representative on the DP2 DSV Maersk Responder for umbilical lay, pipeline tie-in works, electro-hydraulic hook-up and testing of subsea facilities, pre-commissioning of pipeline and trenching umbilical.

In my previous 7 years experience, I worked for Parsons, Jacobs Engineering, ProsCon and Project Management Ltd as a project engineer, mechanical engineer and commissioning engineer mainly in the pharmaceutical industry.

Throughout my career I have gained a strong engineering and execution, contractual, cost control, procurement and scheduling background through working on a wide range of fast track projects in the oil and gas and pharmaceutical industries.

REFEREES
* Available on request

EMPLOYMENT

FEB 2007 – CURRENT NEXUS ENERGY, MELBOURNE
SUBSEA PROJECT ENGINEER LONGTOM OFFSHORE GAS DEVELOPMENT, BASS STRAIT
PROJECT SUMMARY
The Longtom gas field is being developed by Nexus Energy to supply gas into the Eastern Gas Pipeline (EGP) after processing at Santos Patricia Baleen (PB) Gas Plant. The Longtom field is located in the Bass Strait is being developed with two horizontal sub-sea wells. Produced gas will flow to shore via a 17.2 km high pressure pipeline tied back Patricia Baleen gas pipeline and then to Patricia-Baleen gas plant. The 21km Longtom electro-hydraulic control umbilical will deliver power, chemicals and control to the Longtom subsea trees and HIPPS. The project also includes other subsea facilities such as PLEM, SCU, UTA, spools, valve assemblies and hydraulic flying leads.

ROLES AND RESPONSIBILITIES – Front End Engineering Design (FEED) and Detailed Design (DD)
Nexus Project Engineer responsible for following:
* Umbilical contract (DUCO) including but not limited to: bid evaluation, procurement, manufacturing, testing of electro-hydraulic umbilical. Spent 6 weeks in DUCO premises (Newcastle, UK) as client representative for umbilical termination, testing and load-out activities
* Subsea valve contract (BEL Valves) including but not limited to: bid evaluation, procurement, manufacturing and testing. Consists of high pressure large bore and small bore ball and split gate ROV / gearbox operated valves. Client representative based in BEL Valves, Newcastle co-ordinating team of Nexus QA/QC personnel for assembly and testing of valves
* Flowline contract (NKT) including but not limited to: bid evaluation, procurement, manufacturing and testing. Managed two on site representatives to successful completion and delivery of flexible pipe.
* Umbilical Sub-sea Connector contract (Unitech Offshore) including but not limited to: bid evaluation, procurement, manufacturing and testing of planned ROV Charlie plate subsea connector. Connector required due to length of umbilical sections / weight / reel size restrictions
* Gooseneck and diverless Optima connector (Vector International) including but not limited to: bid evaluation, procurement, manufacturing and testing of ISO 13628-8 Class 5 6" Optima connector for tie-in connection from Christmas tree togas export pipeline.
* Review and approval of FEED and DD deliverables from detailed design contractor (WorleyParsons) including but not limited to: BOD, field layouts, equipment specifications, P+ID's, ITT packages, pre-commissioning philosophies
* Review and approval of Offshore Installation Procedures for umbilical ay, pre-commissioning, coating, WROV procedures, flexible installation
* Umbilical and subsea equipment (Cameron) interfaces
* Other minor orders included MEG, hydraulic oil, anodes, cable protection systems
* Overall commercial management of above contracts including development of contract, evaluating contract variations and approval of vendor payments.
* Assist Nexus OIM resolving technical and commercial queries with installation contractor
* Assist Nexus Lead Subsea Engineer closing out technical queries associated with subsea equipment vendor (Cameron)
* Participate in project HAZID's, JHA's, HAZOPS, Risk Assessments and constructability reviews
* JP Kenny interface for validation of Longtom design and installation deliverables (Consent to construct)

ROLES AND RESPONSIBILITIES – INSTALLATION
* Review and approved installation procedures.
* Validation and marine warranty co-ordination of reviews
* Management and supervision of Offshore Installation contractor as Company representative for installation of umbilicals, EFL's, HFL's, hook-up and function testing
* Offshore client representative for installation of flexible and pipeline tie-in spools
* Offshore client representative for pipeline pressure test, system leak test and dewatering
* Offshore client representative for trenching and stabilisation of Electro-Hydraulic control system

JUNE 2006 – FEB 2007 PARSONS
PROCESS PROJECT ENGINEER CLIENT: CONVATEC, WALES - USD $50m
* Submitting FEED deliverables, (Basis of Estimate, Basis of Design, Capital cost estimate (accuracy +/-10%), utility and process estimate process and instrumentation diagrams, utility sizing calculations.
* Process and utility equipment specifications for enquiry and purchase.
* Parsons representative for project HAZID / HAZOP.
* On-site attendance at design and project client review meetings
* Interactive planning and project procurement / contract strategy.

JULY 2005 – JUNE 2006 JACOBS ENGINEERING
LEAD MECHANICAL ENGINEER CLIENT: PFIZER/SCHWARZ, IRELAND - USD $200)
* Developing +/- 10% capital equipment cost estimate
* Generating process and utility equipment specifications
* Responsible for co-ordinating and managing three experienced process engineers to generate equipment specifications and equipment process and instrumentation diagrams.
* Interactive planning and project procurement strategy.

JULY 2004 – JULY 2005 PROSCON
LEAD COMMISSIONING ENGINEER CLIENT: NOVO NORDISK, DENMARK - USD $30M
* Commissioning an ethanol recovery system (ERS) and associated tank-farm.
* Control system used is client supplied SAT-LINE. Designated MCC for ERS and tank farm installed and commissioned by ProsCon.
* Co-ordination of on site commissioning team and construction personnel.
* Attend daily progress /meetings with client

PROCESS PROJECT ENGINEER CLIENT: FOURNIER, IRELAND - USD $20M
* Co-ordinating a multi-discipline design team to facilitate the process technology transfer of a clean bulk manufacturing process from Fournier Ireland to Fournier France.
* Lead process engineer responsible for P+ID generation, equipment and instrument specifications and schedules, valve sizing and co-ordination of other process engineers.

SEPT 2001 – JULY 2004 JACOBS ENGINEERING
LEAD MECHANICAL ENGINEER (CLIENT: ELI LILLY, IRELAND) (USD $200M)
* Process and utility equipment specifications, utility sizing and utility Process and instrumentation diagrams.
* Responsible for co-ordinating all grey utility activities including generation of project Process and instrumentation diagrams, HAZOP, checking equipment specifications, utility calculations, man-hour estimating and resource planning, completion of handover packages.
* Seconded to cost department during front-end study to complete equipment capital cost estimate (+/-10%).

MECHANICAL ENGINEER
* Merck, Sharpe & Dohme (MSD), UK – Senior Mechanical Engineer for R&D expansion
* Johnson and Johnson (Janssen), Ireland – Design and Installation of new purified water loop
* Irish Defence Forces, Ireland – Diesel ship re-fuelling facility
* GlaxoSmithkline, Ireland – Dutasteride & Abacavir
* MSD, UK - R & D Expansion
* Pfizer Asia Pacific PTE Ltd., Singapore - OSP 1

JUNE 1999 – SEPT 2001 PROJECT MANAGEMENT LTD.
CONSTRUCTION ENGINEER
* Novartis, Ireland: Seconded to client
* Pharmacia, Ireland: Seconded to client
* Pfizer, Ireland: Key member of Project Management on-site CMT

PERSONAL INFORMATION

* HUET (Helicopter and Underwater Escape Training)
* UKOOA (UK Operators Offshore Association) Medical
* MSIC (Martine Security)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 2546)

Go to Search Parameters...

Brief Description

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Project Engineer

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

Project Engineer Subsea (Oil & Gas)

Purchaser, Warehouse Manager, Estimator

I have an excellent amount of experience in the Personnel/HR management 12 years (1996 – present). My current position is HUMAN RESOURCES MANAGER /ADVISOR, Abu Dhabi.

•Over 15 years of Project Management experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August , HIMA etc. •Foundation Field Bus •Analytical sys.Design and Engineering - Physical Property Analysers, NIR •Field Inst. Engineering. •System commissioning.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.

A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.

Engineer, 10 Years experienced, Construction management of industrial projects

Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.

More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.

Fully experienced manager/agent within the water/utilities industry

Management of QA (Quality Assurance), Planning, Scheduling & Project Control

Cost/Budget Controls Manager

Ø Seeking a challenging position to utilize my education and experience in the field of Pipeline engineering profession. Ø To work in challenging environment and contribute the growth of the organization, to work professionally, honestly and for the prosperity of organization.

A keen team player with more than 15 years experience in Project Document Management, solid background in IT support, accounts, project administration, Project co-ordinator, quality control co-ordination and project analysis. Expert in Documentum.

40 years practical and managerial experience in the gas,oil petrochemical and water sectors.

Responsible for Civil / Structural works of assigned Projects for both Oil & Gas Industry and Commercial/Residential or Mixed Used Projects.

Degree Bachelor of Science in Mechanical Engineering

Information Technology Vicepresident / Manager / Director / Project Manager

Over 25 years of progressively responsible experience in environmental program management, marketing, managing and performing site characterization studies, feasibility studies, remedial alternative development and implementation for numerous oil and gas sector projects in the US and internationally

Briefly I offer services pertaining to quantity surveying both as a PQS and Contractors Qs. That includes for duties such as Preparation of contract documents, Preparation of Bills of Quantities, Bid Administration, Cost Estimating, Cost Planning, Procurement, Measurements, valuations and Claims.QUA

7 years shipyard work experienced Senior Ship Manager

I have 32 years of experience in the oil and gas industry. I have been an Operations Manager for 15 years and have managed fields in 7 different states.

Construction Civil Superintendent (Earthworks, Infrastructure and Concrete)

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

Seasoned professional sourcing, procurment Manager with 19+ yrs experiences with Fortune 10 company and others in Middle East and South East Asia.

B.Com (India), ACA (India), Grad CWA (India), M.S.Finance (Canada)

Oil Field Co-ordinator, Microsoft Programms, Mangement

I am seeking the position of Field Service/Customer & Technical Support/Sales Engineer/Supervisor/Coordinator.

ENGINEER with experience in PROJECT MANAGEMENT Russian, English and French fluent. Pipeline coordinator in Moscow, Russia.

HSE Manger

Certified Facility Manager

20 years experience in accounts & administration with reputed organisations like Trading, FMCG, Manufacturing, Oil Industry

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

I am presently working as Manager (Mechanical) with Engineers India Limited an ISO 9001 CONSULTANCY ENTERPRISE of Govenment of India & supervising on behalf of owner all piping and equipments installations in PTA - project of Indian Oil Corporation at Panipat Haryana India.

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

Versatile, multi-disciplinary, innovative and excellent track record in 15 years working experience including 13 years in Oil and Gas Logistics, Material and Procurement positions which offers eventual advancement into Finance Management looking for Logistics/Material/Procurement Managerial level.

1992 NTT research, Tokyo, Japan (trainee), 1993 - 1997 PhD exp. Physics, 1997 - 2000 reservoir engineer (RE), oil major's research lab, 2000 - 2002 RE Russian offshore oil development, 2002 - 2005 RE, Al Furat Petr. Co, Syria, later section head and subs. asset man.

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out