CONTACT INFORMATION:
View contact information...
OBJECTIVE:- Seeking a quality environment, my knowledge can be shared and enriched. Looking for the opportunity where I can improve my quality and project management skills. I well prepared to move with increased responsibility, and look forward the challenges of Oil and Gas/ Refinery/ Petrochemical, Engineering, Procurement and Construction (EPC) International/ MNC companies, to reinforce your esteemed organization.
EXPERIENCE: - Ten Years of Experience in Project Planning, Scheduling, partially in Costing in Oil and Gas, Petroleum, Petrochemical & Cross Country Pipeline, fabrication of Pressure Vessels EPC Turnkey Projects and Heavy Industrial & Commercial Pre-Engineered/ Pre Fabricated Buildings, Porta Cabins (Row of Housing/ Site Camps) in India & Abroad.
EXPERIENCE SUMMARY:
Duration: Nov' 2007 ¡V Till date
Company Name: HEAVY ENGINEERING INDUSTRIES & SHIPBUILDING COMPANY (HEISCO) Industrial Contract Division, Oil& Gas Sector, Kuwait (an affiliate of M.A. Kharafi National) (Web site: www.heisco.com)
Designation: Unit Head Projects Controller, Workshop.
Presently Working: Fabrication of Pressure Vessels, Piping, Structural steel works at ICD, Kuwait.
Clients:1. SKEC, Korea-12 Nos. Vessels for GC-24 (Desalters, Separators & Heaters)-Cost: US $ 15 Million for Kuwait Oil Company.
2. Kuwait Oil Company: Supply of 18 Nos. Separator& Scrubbers-Cost KD 3.8 Million and other major clients are KNPC, Equate, Petrofac, Flare Industries-UK, Plenty Process Filtration, Safwan Petroleum Co, etc.
First Project:
Designation: Senior Planning Engineer
Client: MINISTRY OF ENERGY-ELECTRICITY& WATER (ME-EW), Kuwait.
Client Representative: KUWAIT OIL COMPANY (KOC), Kuwait.
Engineering Consultant: PENSPEN (Onshore ¡V Value Management Services) is Europe's leading independent engineering and design company specializing in all aspects related to pipelines operations and management, pipeline integrity and rehabilitation.
Project: Multi Discipline Engineering, Procurement, Construction (EPC) And Commissioning Of (Cross country pipeline) Heavy Fuel Oil Pipelines (20" Dia.- 2 Pipelines of each 120 Km) From Mina Al-Ahmadi Refinery To Doha West Power Station, Kuwait.
* Scope of Work: (Project Cost US $ 155 Millions)
o Engineering Design& Drawings
◘ Civil ◘ Mechanical ◘ Electrical ◘ Instrumentation o Procurement (Major & Long lead Items)
◘ 20'' Dia. 10.3& 19.1 Carrier pipe& Bends (Includes 3 LPP & Thermal Insulation)
◘ MOV ◘ Pig Launcher& Receivers ◘ HFO Filters ◘ JIB Crane ◘ Corrosion Coupons etc.
o Construction:
◘ Civil: Pipe Trenching, Pipe Supports, Drain Vessel Pits, Valve pits, UG cable trenching, Road crossings etc. (HDD, Micro tunneling, Augur Boring etc.)
o Mechanical: Pipe fit-up& Welding, Radiography, Heat shrink Sleeve, Joints Insulation.
o Electrical& Instrumentation Works.
◘ Completed electrical components, works for pipe line and operation.
(CP System, Transformers, UG/ AG cable works etc.)
◘ Instrumentation components, works for pipe line and operation.
( Different Valves, Gauges, Meters, Junction boxes etc.)
o Equipments.
◘ Pig Launcher& Receiver ◘ Drain Vessels ◘ JIB crane ◘ HFO Filters etc.
Responsibility:
„Ï Preparing the EPC Master/Base line schedule including Resources loading, "S" curves, Bar Charts, Histogram etc. using PRIMAVERA accordance with contractual scope of work and project duration according to the QA/QC, HSE regulations & guidelines, KOC & KNPC standards. And monitoring the project.
„Ï Submitting the daily, Weekly, Monthly reports and 3 Weeks look ahead schedules of WBS activities (Work Breakdown Structure) to Client/ Management.
„Ï Frequently Reviews and recommends necessary planning documents and ensures that such documents are regularly updated by Consultants and Sub Contractors.
„Ï Develops and maintains systems and procedures covering the areas of Planning, Scheduling progress measurement.
„Ï Projects execution strategies Reviews and implementation schedules for the projects
„Ï Identifies and reviews regularly the critical and sub-critical activities and their impact on the project schedules.
„Ï Monitors the actual progress from Consultants/ Sub Contractors/ project site and ensure the reports accurately reflect the actual performance and productivity.
„Ï Ensuring adequate QA/QC & Safety is carried on all plans
„Ï Reviews and calculate the Change Request by Consultants/ Sub Contract Trend Notice related to time impact.
„Ï Reviews the work forecasts and plans for remaining activities and comments on the proposals for any amendments to original plans and schedules.
„Ï Prepares the Project Organization Chart, Project Management Consultant/Third Party inspection Services Manpower Allocation Chart and Mobilization/ Demobilization plan for Design and Construction Projects.
„Ï Analyses and identifies areas of concern, work progress trends for potential problems, examines implications of such problems.
Duration: Feb' 2006 ¡V Nov' 2007
Company Name: M/s ALGHANIM INTERNATIONAL GENERAL TRADING &
CONTRACTING Co. W.L.L, (Member of Fouad Alghanim & Sons Group of
Companies) Oil & Gas Sector, Kuwait. (Web Site: www.fmtas-group.com).
Designation: Planning Engineer II
LAST PROJECT
Client: KNPC/ CHICAGO BRIDGE & IRON Co. New York (CBI Eastern Anstalt) is one of the worlds leading Engineering, Procurement and Construction (EPC) Multinational Contracting American Company. (Web Site: www.cbi.com)
PMC/ Consultant: BECHTEL Corporation, London, UK. (Web Site: www.bechtel.com)
Project: Construction of Light Naphtha Tanks (4 Nos.) (LN4T) EPC turnkey project includes road works, Underground piping, Electrical works, Fencing, Drainage system etc. for K.N.P.C (Kuwait National Petroleum Company) at Meena Abdullah oil refinery, Kuwait.
FIRST PROJECT
Client: K.O.C/ TECNICAS REUNIDAS, S.A, Madrid, Spain. One of International EPC
Turnkey Contracting Company in Petrochemical, Oil & Gas.
(Web Site: www.tecnicasreunidas.com).
PMC/ Consultant: FLUOR International, Kuwait, an American company.
Project: Capacity Expansion for Compression and Medium Crude Processing up to 220,000 Bpd at Gathering Centre-28 (GC-28) for Kuwait Oil Company (K.O.C) Kuwait. works executed (Running plant) in the TV flare area, Tank area (Including Construction of Bund wall), Compressor area, Condensate area, Desalter area, Manifold area, Chemical Injection & Separator area etc. U/G piping, Road works & Drainage work.
Responsibility: Same as above
Duration: Sept. 2003 ¡V June 2005
Company Name: M/s TARGET STEEL INDUSTRIES, Khartoum, Sudan.
(Multinational Group of companies ¡V an affiliate of ALHADAF SUDANEES
INDUSTRIES-Sudan) Pre-Engineered steel structures, porta cabins, Cold store Rooms, EPC Turnkey Projects etc.
Designation: Section Leader/ Planning Engineer
Responsibility: Planning and Estimation of Industrial & Commercial Pre Engineered Buildings, Porta Cabins (Row of housing, Camps), Cold store Rooms, EPC Projects. Including Civil, Electrical, Mechanical turnkey Projects, Work Breakdown Structure (WBS), detailed Planning, Scheduling, Assigning Resources, Controlling Resources, Graphic Reports. Tabular Reports, Updating Schedules, Tracking Resources, preparation of 'S' curves etc. for the varies departments to meet the project targeted schedules and visit to consultant/ site if required. Apart from this to manage and overall co-ordination with a team of one estimator one checker and three draftsmen and includes review of work done by team persons.
Duration: Sept. 1999 ¡V Sept.2003
Company Name: M/s KIRBY BUILDING SYSTEM INDIA LTD. Hyderabad, India. (Multinational Group of companies ¡V an affiliate of ALGHANIM INDUSTRIES- Kuwait) Pre-Engineered steel buildings and it is qualified for ISO 9001. I am well versed with usage of software packages and on codes & standards (AISC, AISI, MBMA, AWS & ASTM).
Designation: Junior Engineer.
Responsibility: Planning of complete project of Pre engineered building including Engineering, Procurement, Fabrication, QA&QC, Erection etc. And checking of approval drawings according to design, Fabrication drawings (Both Hot rolled & Cold formed sections) like Hot Rolled sections ISMB, ISMC, ISA etc. And Built-up columns, rafters, Mezzanine Beams, Portal frames, fascia stubs etc. Cold form sections like eave struts, 'Z' Purlins, Girts, 'C' channels etc. and bill of material and finally erection details and list of all the components of the pre-Engineered building drawings using American codes & standards. Planning, Scheduling, allotting the jobs based on priority.
EDUCATIONAL QUALIFICATION:
„Ï BACHELOR DEGREE IN CIVIL ENGINEERING from S.R.T.M. University Nanded,
(Mharashtra). Completed in Nov/Dec 99, with "First class with Distinction".
„Ï DIPLOMA IN CIVIL ENGINEERING from State Board of Technical Eduction and Training (S.B.T.E.T) Hyderabad (Andhra pradesh). In May 94, with "First class".
„Ï Undergone professional training in Auto CAD R-2004 (Automated Computer Aided Drafting) & M.S Office 2000 given by "Engineer CAD Centre" sponsored by M/s Kirby building system (I) Ltd.
„Ï Undergone professional training in KADS ( Kirby Automated Drafting System ) given by "M/s Mantra magic exports soft (I) Ltd." sponsored by M/s Kirby building system (I) ltd.
„Ï Undergone professional training on OSHA (Occupational Safety & Health Administration) given by "proximity, UAE (affiliate to an American Govt. Dept. of Labour) on Oct' 2008 at Kuwait.
„Ï Trained over EOD (Explosive Ordinance Department) by K.O.C at GC-28 on March' 2006.
„Ï Trained over HSE (Health, Safety and Environment) 'SAFETY ORIENTATION' by Fluor (PMC) / Tecnicas Reunidas, S.A at GC-28, on July' 2006.
COMPUTER EXPOSURE & SKILLS:
Software Package: STAAD PRO, STAAD-III, AutoCAD R-2006 and
MS Office (Excel, Word, Power Point).
Project Management: PRIMAVERA V3.1 (P3), Knowledge of M.S Project.
TECHNICAL SKILLS:
Programming in M.S Excel, 3D Drawings & Isometric Views in Auto CAD R-2004/2006
ACHIEVEMENTS: -
„Ï Prepared the standard details PACKAGE of "PRE-ENGINEERED STEEL BUILDINGS WITH ITS DETAIL COMPONETS AND CONNECTIONS" in 2D as well as 3D by using Auto CAD R-2000.
„Ï Prepared the standard details PACKAGE of industrial different "SLIDING DOORS" with different sizes (Single Sliding Doors & Double Sliding Doors) Using M.S EXCEL-2000
„Ï I was the Associate member of the KIFME (Kirby Forum of Management Eduction) for the M/s Kirby building system (I) Ltd. As a "Departmental Coordinator" from
Engineering Dept.
„Ï Best performance incentive reward in Planning/ Checking for the year 2002 in M/s Kirby building system (I) Ltd.
PERSONAL PROFILE:
DATE OF BIRTH: 01st June 1975
GENDER: Male
MARITAL STATUS: Married (Two Kids)
LANGUAGES KNOWN: English, Hindi, Urdu, Telugu, & Reading Arabic, Partially
Speaking Arabic
GENERAL PROFILE:
EXPOSURE: Working in Multinational & International Organizations with Training & Experience
GENERAL NATURE:
„« Industrious, Confident and Result oriented with convincing manner
„« Ability to conceptualise forms & structures and operation
„« Can work with part of team apart from administration
View contact information... |