Resume - Very good experience in the mechanical maintenance of various oil fields, gas c...

Misco Jobs

Resume #8863

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Bacholar of Engineering ( Mechanical ), apssed out in May 1981 from Madras University, India.
------------

OBJECTIVE:
------------
To achive a better position in Planning and Scheduling. To provide the expertise in planning and scheduling to the company to achive the optimum utilisation of available resources, with minimum down time.
------------

WORK EXPERIENCE:
------------
12.07.2000 Till on date. Zakum Oil Development Company, ( ZADCO) Abudhabi. Planning Engineer

09.05.98 04.07.2000 Qatar Liquefied Gas Company Ltd, Qatar. (Secondment by M/S.London Bridge Engg.) Planning & Costing Engineer

06.02.92 20.02.98 Abu Dhabi National Oil Company, Ruwais Refinery, Abudhabi. Maintenance Planner

04.03.89 02.08.90 IMCO, Kuwait Under Maintenance contract of KUWAIT OIL Company, Kuwait. Maintenance Planning Engineer.

15.07.87 30.01.89 KREMENCO, Kuwait under Maint. contract of Kuwait National Petroleum Company, Mina-al Ahmadi, Kuwait. Plant Maintenance Engineer.

12.03.86 14.07.87 EPIC Instruments Incorporation Kuwait under Maint contract of Kuwait National Petroleum Company, Mina-al Ahmadi, Kuwait. Senior Maintenance Technician.

20.08.84 11.03.86 Bharat Petroleum Corporation Ltd. (Refinery), Bombay. Mechanical Officer

Aug. 81 JULY 83 Southern petrochemicals industries corporation Ltd., Tuticorin, Tamilnadu. Maintenance Engineer

PLANNING ENGINEER (ZADCO, ZIRKU MAINTENANCE SUPPORT)
1) Implementation of MAXIMO, CMMS( Computerised Maintenance Management Systems).

2) Involved in Stock value optimisation program. Identify non-moving spares for long time and deleting or take suitable action as per recommendation with the end user. Identify high cost items, which are non-moving or slow moving and transfer them to asset store.

3) Prepare SPIR. Prepare two years operation & maintenance spares for the new projects. Liaise with Commercial department during the process of PR, like ITT, Technical clarifications, Technical evaluation, till the material delivered.

4) Prepare PM programs, schedule and implement.

5) Prepare detailed bar chart for major maintenance jobs, projects and shutdowns. Close co-ordination and follow up to prepare S-Curve for progress monitoring.

6) Prepare annual budget for the department, prepare budget forecast and budget control. Prepare variance analysis.

7) Prepare AFE for the budgeted items and prepare completion AFE once the job is completed.

8) Assist maintenance personnel to implement maintenance policy & procedures.

9) Assist in establishing, the BOM (Bill of materials) required for major shutdowns and overhauls.

10) Prepare statistical analytical reports, charts as required for maintenance performance measures.

11) Develop Tender documents and issue tenders to pre qualified contractors (Both local as well as international contractors / vendors ). Use Company established standard contract terms and specific contractual terms applicable to the particular job.
12) Co-ordinate with the job officer and the Tenderers for the technical clarifications and site visits.
13) Co-ordinate with the job officer to carryout the Technical evaluation.
14) Open the commercial bids for the technically qualified contractor / vendor.
15) Obtain the Tender Board / Management approval as per the DOA. (Delegation of Authority).
16) Administration of the contract. Create variation orders, if required. Follow up the schedule of payment. Make sure the correct financial account codes are followed up. Evaluation of contractor's performance.
17) Actively involved in the following Task Forces: Maintenance Management Task force, Commercial Strategy For Spare Parts Management and Commercial Strategy for Service Orders.

18) Train the incoming UAE Nationals: -on the job & classroom training.

PLANNING & COSTING ENGINEER (QATAR LIQUEFIED GAS COMPANY LTD)

1) Participate in preparation of Shutdown Master plan schedules. Planning using Primavera-P3, scheduling and progress monitoring. Working in CMMS system SAP R/3.

2) Develop internal procedures for planning & scheduling in-house engineering works. Assist Engineers in the division in the preparation and updating of in-house schedules.

3) Measure the progress of projects and report the variances. Contract management using Primavera Expedition 5.1.

4) Review tender schedules and provide technical input in tender evaluation. Review and approve Contractor's schedules and progress measurement methodologies. Progress monitoring of Contractor's project schedules and to report the variances.

5) Prepare Project master schedules using Primavera -P3 (for Windows) software, for Facilities Modifications to support internal project justification and Contract tender invitation.

6) Prepare the Division monthly and yearly plans and works schedules and maintains updates.

7) Prepare cost estimates for Facilities Modifications.

8)Review contractors invoices and prepare variance analysis –(Budget Vs. Actual). Maintains cost control on all expenditures related to contract services. Reviews and certifies all invoices including backup documents, e.g. timesheets, progress report, etc., Maintains proper record of financial commitments on each contract and highlights to management any variances with suggestions of corrective action. Review all additional claims from contractors and discusses with contractors for possible rejections as per contractual terms.
9) Liaises with Engineers/Section Heads in Engineering department to prepare Tender package for contracting out Facilities Modifications. Participates in all activities of tender preparation, site visit of the Bidders and bid evaluation up to the stage of contract agreement. Participates in progress review meeting with contractors for monitoring periodically the performance and suggests corrective steps in case of deviation from agreed schedules.
10) Participate in preparation of annual Capital budget submissions for the Engineering Services section. Duties involve collecting data from all engineers, reviewing the same for providing data for contract services.

MAINTENANCE PLANNER (ABU DHABI NATIONAL OIL COMPANY):

¨ Worked in TEROMAN CMMS system. Maintains equipment history cards in TEROMAN for critical equipment with detailed list of spare parts consumed. Check the availability of spare parts for future usage after major overhaul of critical and non-critical equipment. Reorder or instruct the Warehouse to maintain the inventory through MMS-9000/AGMICS.
¨ Prepares detailed overhaul report / failure analysis report with necessary recommendations and observations.
¨ Maintains cost control on all expenditures related to contract services. Reviews and certifies all invoices including backup documents, e.g. timesheets, test certificates, etc., Maintains proper record of financial commitments on each contract and highlights to management any variances with suggestions of corrective action. Review all additional claims from contractors and discusses with contractors for possible rejection per contractual terms.
¨ Maintains cost control by monitoring the Maintenance Department Budget, reviews the monthly variance reports. Discusses with Section Head to clarify any abnormalities in posting the cost. Prepares various reports on actual performance against budget highlighting action for controlling the cost. Prepares adhoc reports for management information.
¨ Maintains up-dated data for all expenditure of the Department for preparing various Management information reports, reviews performance indices in relation to various audit reports.
¨ Liases with Engineers/Section Heads in maintenance department to prepare detailed specification/ workscope for contracting out certain activities. Participates in all activities of tender preparation, site visit of the Bidders and bid evaluation up to the stage of contract agreement. Assists Section Head in preparation of detailed post shutdown report.
¨ Planning, preparation and scheduling of specific modular or major turnarounds maintenance activities. Includes follow-up with Operations personnel for coordination of maintenance works prior to scheduling and control of backlog work. Follows-up on the schedule maintenance by visits to assigned areas to ensure work progresses according to planned programs.
¨ Developed PM Programs, plan & schedule and revise the frequency & activities, for various type of Stationary and Rotating Equipment.
¨ Reviews annual requirements for contract labour / special equipment / manpower hire for specific maintenance jobs and any plant emergencies. Analyse own manpower, equipment and those from other operating centers and ADNOC affiliated companies to ascertain detailed needs to be acquired from outside agencies. Initiates necessary documents for obtaining management approval and thereafter prepares telex of indent, short term agreements for labour / equipment / services hire.
¨ Participates in preparation of annual budget submissions for the maintenance function. Duties involve collecting data from Maintenance Department Section Heads, reviewing the same for providing data on expected man-hour requirements, spare parts, consumable, use of external specialist / contract services, etc. Prepares detailed justification for proposed expenditures with relation to historical data. Participates and assist the Planning Section Head in the budget review exercise and carries-out the necessary revision / updating.
¨ Maintains and updates contractors performance data, cost data for future reference. Initiates timely action for revalidation / renewal of contract agreement. Exercises control over implementation of body shop contract ensuring mobilization of personnel as per contract and organizational needs. Liases proper safety orientation of contractor personnel prior to start of work at site, monitors performance of personnel and suggests timely action for demobilization, etc.
¨ Involved in TQM Circles, Bench Marking Study & SOLOMON SURVEY.
¨ Involved in Maintenance Management System Audits, Computerization of PM programs.
¨ Planning, Scheduling using 'TEROMAN ' and close follow up of:
a. Daily Maintenance jobs b. Shutdown Maintenance jobs - Major/Minor c. Modification jobs.
¨ Preparation of Bar Charts and updating them using PRIMAVERA (P3) for Windows. Familiar with CPM/Pert Charts; Monitoring of Project / Shutdown progress using 'S' curves.
¨ Familiarity with Computers:
a. M.S.Project, Primavera (P3) for Windows, Expedition 5.1
b. Teroman c. AGMICS
d. Frame Work III, Harvard Graphics, DBase III, Freelance Graphics, FORTRAN, Lotus - 1,2,3, Basic.
e. Microsoft Excel 7.0
¨ Train the incoming UAE Nationals: -on the job & class room training.

PLANNING ENGINEER - KUWAIT OIL COMPANY (KOC) - KUWAIT:

Worked in the Computerised Maintenance Management Services of KOC, Kuwait. Worked in CREOLE CMMS system.
¨ Developed PM Programs for various type of Stationary and Rotating Equipment, Associated with oil field Gas gathering centers and booster stations.
¨ Prepared major overhauling procedures of various types of Gas Turbines like:

- Ruston Gas Turbines, Model No. TB 5000, TA-1250, TA-1500 and TA-1750.

- General Electric Gas Turbines, Model No. 5332B and 5262A.

- Rolls Royce Avon Gas Generators - Model No. 76G and 101G.

- Dresser France Power Turbines - Model No. DJ125 and DJ160.

- Solar Gas Turbines - Model No. T-4002.

¨ Prepared major overhauling procedures of different types of Gas Engines like:

- Cooper Bessemer - Model No. C.B. GMWA-8.
- Caterpillar Gas Engines/Diesel Engines - Model - D379, G379, G353, G399.

¨ Prepared major overhauling procedures of different types of Centrifugal Compressors, like:
- Dresser Clark Model No. 755 B9.
- Dresser France - Model No. 755 B8-4, 747 B9-7, 3M3-2, 3M8-5.

¨ Prepared major overhauling procedures of different types of Pumps, Reciprocating Air Compressors and other Stationary Equipment.
¨ Spare parts planning and bill of materials for those P.M. jobs and major overhauls.
¨ Manpower Planning.
¨ Allotting site numbers & equipment identification numbers for various types of equipment, associated with the oil field.

EPIC INSTRUMENTS INCORPORATION - KUWAIT & KERMENCO - KUWAIT
(KUWAIT NATIONAL PETROLEUM COMPANY - MINA AL-AHMADI):

- Running Maintenance and Shutdown Maintenance of 3X560 MMSCFD Natural Gas Plant.

- Overhauled propane compressor of 27,000 KW capacity of M/S. DEMAG, West Germany, Drive extraction turbine of Turboyodyne - U.S.A.

- Good experience in the maintenance of Pumps, Steam Turbines, Heaters, Reboilers, Vessels, Columns and Towers associated with Gas Plant.

- Running maintenance and shutdown maintenance of high pressure boilers of 900 PSI & 820 Deg. F. at 6 X 180 Tons/Hr. Capacity make of Lentzes Ferdinand - West Germany & Mitsubishi, Japan.

- Good experience in the trouble shooting and overhauling of various types of Governors like UG-8L, TG10, PSG, SG, PG-PL.

- Running and shutdown maintenance of high-pressure B.F.W. Pumps, Instrument Air Systems and Paxman Diesel Fire Pumps of 1500 HP, D.M. Water Plants.

- Running maintenance and shutdown maintenance of Multistage Flash Evaporators (19 Stages) for water desalination plants of 4 X 1,000,000 Gallons/day of Sumitomo Heavy Industries, Japan.

BHARAT PETROLEUM CORPORATION LIMITED, BOMBAY, INDIA:

- Condition Monitoring of Refinery Process Equipment, Conversant with the usage of IRD 811, IRD 880, IRD 308, TK 80, IRD 350 and SPM for vibration monitoring and vibration analysis of various rotating equipment.

- Trouble shooting and overhauling of various types of Rotating Equipment in the Refinery such as Wet Gas Compressor and Process Air Compressor of F.C.C.U. - Turbine - Siemens and Compressor - Nuovo Pignone. Erection and commissioning of 550KW steam turbine of M/S. K.K.K., West Germany.

SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LIMITED (SPIC)
TUTICORIN, INDIA:

- Mechanical maintenance of Ammonia, Urea, Sulfuric Acid, Phosphoric Acid and Diammonium Phosphate Plants.

- Trouble shooting and overhauling of various types of Rotating Equipment like Steam Turbines, Centrifugal Gas Compressors, Reciprocating Compressors and various types of pumps.

- Overhauled syntheses Gas Compressor of 22,000 KW Capacity of M/S. Clarke USA make. Drive extraction turbine of Nuovo Pignone.

------------

EDUCATION & CERTIFICATION:
------------
B.E. (MECHANICAL) PASSED IN 1ST CLASS IN 1981 (UNIVERSITY OF MADRAS, INDIA).

REGISTERED ENGINEER IN KUWAIT ENGINEERS' SOCIETY.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 2551)

Go to Search Parameters...

Brief Description

HSE superintendent in drilling and work over onshore rigs in Algeria over 30 rigs and one in omane

Accomplished technical and managerial career qualified by 24 years of measurable achievements in the construction and mining industries. Highly skilled in identifying, evaluating and negotiating joint venture and other international business opportunities with government officials, the private sect

HSEQ manager, management system development, auditing, safety case development

Very good experience in the mechanical maintenance of various oil fields, gas companies and refineries. Familiar with day to day maintenance planning, shutdown planning , CMMS and IPP syatems.Familiar with Primavera P3-e, MS Project, SAP-R3, MAXIMO&TEROMAN. Budget preparation&cost control

More than 11 years of professional experience in structural basic & detail engineering of Refineries, oil field developments, process and worked extensively in (PDMS11.6.SP.4, PDS7.2, X-steel, Auto Cad R2004.

Petroleum Engineer

I am a very detail and task orientated person. When I set out to accomplish something, nothing stands in my way until it is 100% complete. I am competent in delegating duties and tasks, and I follow up on other's progress.

I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years) (MTBE & Pentaerythritol) and 3 years in Pesticid

Project engineering/managment

A solid operations/manufacturing/sales/marketing/quality control/administration background within large and small firms with responsibility to orchestrate numerous M&A and turnarounds of trouble companies and divisions. A complimentary proven risk management background within Middle Office and Tra

Mechanical?Electrical Engineer,Steel Expert,Steel Plant operation Incharge Marketing & Sales Incharge ,QMS,EMS.OHSAS Regd Lead Auditor,MBA9Business Admin.Professional Doctorate in Environmental Management.,Handled Projects as well as Maintenance,Director,European Quality Body,Managing Directoer Asia

Joint Venture Accountant for four oil and gas companies

Senior Mechanical / Piping Engineer

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

Experienced Contracts Manager professional with CLA credential, MBA (December 2009) and proven track record with more than 15 years of business expertise in financial analysis, logistics, engineering, FAR knowledge, strong legal background, and project management.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

Science major with sales negotiation experience

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP,Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Management, Logtics, Cost Control, Sales

I have US and overseas QA/QC project supervisory experience in the construction, petroleum, mining, and aerospace industries. I am a CWI, Level II in MT, UT, PT and RT film interpretation. Past project duties and responsibilities have included review of purchase orders and exceptions,

I have more than fifteen years of progressive professional experience and have matured from a background in material / inventory control, coordination, and warehousing techniques for oil and gas maintenance, construction and manufacturing industries.

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

Experienced Supply Chain Manager

Engineer / Supervisor Oil Industry upstream production, maintenance & construction. Large field oil production supervision, light & heavy crude oil, well ops & monitoring. Tank farm & ppln construction. Budgeting & Contracting Eng

Provides support of ongoing onshore operations through the application of engineering to daily operation problems. Optimizing and de-bottlenecking production surface facilities.

Free! Oil & Gas Finance, Commercial Manager. 30+ years industry and 20+ years international experience.

Over thirty years engineering, construction, remediation, operations, start-up, and manufacturing experience includes: project management; project planning, sched¬uling and analysis; cost engineering; cost, schedule, and earned value analysis and reporting; WBS, OBS development; EAC, SPSPI and CPI

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

QA/QC Manager, Vendor Surveillance, Inspection Supervisor, Construction Supervisor

Engineer /PGDBM 17 Years Experience in SCADA, PLC, Automation in INDIA, France, Gulf, Middle East

I am a graduate Mechanical Engineer having16 years Design experience with oil refineries and reputed Engineering consultancies. I am well experienced in all piping design activities including stress analysis.

QA/QC, CERTIFICATION, TURNOVER

19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.

Career Objective

Twenty five years experience in ten manufacturing sites with four integrated major and three independent oil companies. Responsibilities include Unit Operator through Refinery Manager, and span operations, maintenance and technical departments. Steady promotion and career growth.

I' ve worked as Cementing Job Supervisor for three year. Work with people and equipment, job calculations, job organization, logistic. Now I work as Cementing Lead Supervisor. Provide support for cementing crews, contact to customer, spares ordering, equipment usage control, personnel work control

16 years in Engineering, Procurement and Construction projects associated with cost control, planning and scheduling fields. Project categories includes petrochemical, gas and oil refining, power, and industrial, buildings, roads and a sports complex. Conversant with project cost control s

Senior Project Coordination/Management Engineer-Oil Gas Petrochemical Energy & Infrastructure

An MBA Finance with strong knowledge of Hedge Accounting and Derivatives valuations and experience with a Big 4 and Financial Software company.

Experienced and innovative operation & maintenance engineer with technical leadership in commissioning & operation and maintenance activities, quality achievement, reliability, efficiency, customer service and cost reduction goals. High level of management skills with outstanding leadership

Objectives To pursue a career in a progressive organization that provides opportunities for career growth and professional development and also in order to groom the overall personality.

MBA(HR), Bachelor of Engineering (Mechanical); Skills: Computer - Ms Access, MS Office, working knowledge of SAP. Soft Skills - Training Need identification, Organising Training, Trainer, Communication, Presentation, Negotiation Skills.

Twenty+ years of Materials and Procurement Management experience including supervision and management of warehouse contractors, material control, procurement activities including vendor sourcing, requisitioning, procurement and expediting, warehousing including receiving and issuing.

Offshore Installation Manager with 25 years experience in the Oli and Gas industry

Deepwater Completions Consultant

Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues

Has the experience and skills required to manage, supervise, handle and monitor all job related aspects of Safety, Health and Environmental protection. Capable and knowledgeable in the process, development and application of different Safety measures that are vital in Offshore & Marine Safety,

In last fifteen years, I gathered varied experience in a medium to large organization which encouraged me to take more responsibilities. You may find my experience suitable for the position in the Electrical Engineering discipline from Project, Operation and Maintenance function. Working in Reliance

Experienced New Technology Key Account Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out