Resume - Power plant engineer involved in a variety of power plant equipment design and c...

Misco Jobs

Resume #8921

CONTACT INFORMATION:
View contact information...

Objective:
Challenging position in a growth-oriented organization, which offers diverse job responsibility in mechanical engineering using my skills as a responsible, efficient motivator of successful engineering teams.

Education:
University of Central Florida, Orlando, FL
1998 - 2000
MS in Mechanical Engineering. Concentration in Mechanical Systems. Dean's List

Northeastern University, Boston, MA
1994 - 1997
BS in Mechanical Engineering. Minor in Mathematics. Dean's List

Work Experience:

Mechanical Engineer

Siemens Westinghouse Power Corporation, Orlando, FL - Power Generation Industry.
2000 – 2004
Thermal Equipment Engineering Group

As a cognizant engineer of the Thermal Equipment Engineering group, the area of work is on Heat Recovery Steam Generators (HRSG), Steam Surface Condensers, Cooling Towers and Rotor Air Cooler Kettle Boilers. Position involves writing technical design specifications for the above equipments based upon the customer specification (Contract) and a variety of codes such as the American Society of Mechanical Engineers (ASME) section I (Boiler Code) and section VIII division 1 (Pressure Vessels), Heat Exchange Institute (HEI) standards, Tabular Exchange Manufacturing Association (TEMA) etc.
In addition, responsible for jobs procurement such as the review of vendor drawings, erection procedures, shop fabrication procedure, review and development of P&IDs and associated instruments list. Also participate in vendors bid evaluations, review or proposals technically and commercially in order to select a fit vendor, responsible of project management and review of all vendors deliverables. Responsible for interface with the vendor, A/E and trouble shooting related issues that might arise at site during project commissioning."

As a group Technical Lead for the Steam Surface Condenser and the Rotor Air Cooler Kettle Boiler Heat Exchangers, I had the responsibility to come up with a standard design for both of these equipments in order to reduce the engineering hours and the cost involved. In addition, I was also involved in standardizing the Selective Catalyst Reduction (SCR) System used in the Heat Recovery Steam Generator to minimize the exhaust Nox from the gas turbine. I have also been involved in doing some Finite Element Analysis calculations with one of our HRSG vendor to come up with the best Tube to Header Connection and have been published to the ASME committee for their review. Position also involved heavy customer contact centered on bid proposals, vendor specifications and client support. In addition, support to marketing/sales groups in order to secure more orders and applications group during bid proposals stage.
Aside of my office responsibilities, I have been also involved in many of "Site Readiness Reviews", it is a process in which the responsible engineer goes out to the site and check on the completeness of the equipment and checks for any show stoppers for the operation of the plant. My responsibility involved a complete check of the HRSG, rotor air cooler and the condenser.
One of the main challenges was to come up with a first time engineering Air/Fuel heat exchanger design to be used in conjunction with a Fin/Fan cooler used to heat up the fuel gas for better performance and to set up the control philosophy description for both of these systems and perform site commissioning of the system. The system was used in two different projects in Mexico and were successfully commissioned.

2004-Present
Balance of Plant Group

As a cognizant engineer of the Balance of Plant group, my scope of work included working on Fuel Gas Heaters, Fuel Gas Compressors, Fuel Gas Skid system and system design of main steam, feedwater, condensate and fuel systems. Responsibilities include process engineering/ mechanical engineering, engineering planning and scheduling and technical ordering document generation. My principle output include system design specifications (Design Basis & Functional Requirements), Engineering Flow Schematics and equipment specifications with calculations to support the design. From these documents, Supply Management can procure equipment and systems, and AE can complete the detailed design of the plant with appropriate overview / approval by BOP. My support of the Erection / Commissioning activities at site include walkdowns / inspections, resolution of site issues (questions, changes, performance problems)".

Mechanical Engineer

Yang Enterprises, Inc., Winter Springs, FL - Construction industry. Primary customers: Exxon Corporation, Mobil Corporation and Kennedy Space Center.
1998-2000
Has been given assignments to perform on-site inspections, and post analysis of the site. Work on mechanical as well as civil aspects of a design. Prepared contract documents, site investigation reports and bid proposals. Provided cost estimates for a government contract. Designed Gasoline Service Stations including site layout, grading plans, utilities plans, landscape plans, petroleum equipment schedules and convenience mart details. Concentrated on working with AutoCAD 14 and Micro
Station to generate plans.
My job responsibilities included to set up AutoCad training classes for all the employees.

Contractor

CDI Corporation - Westinghouse Power Corporation, Orlando, FL
1998
A six-month contract assignment within Strategic and Product Development group. (John Schwab, Manager) Contract consisted of working on 501G 2x1 Combined Cycle - Ironwood Power Project-AES.
Assignment involved modifications of proposed drawings made on AutoCad 14 version, heat balance cases, and process flow diagrams.

Mechanical Engineer

SGM Engineering, Inc., Altamonte Springs, FL - Commercial HVAC and Plumbing industry.
1997-1998
Worked as a mechanical engineer, while performing some drafting and analysis on final product delivered to clients. Acquired experience both in mechanical and electrical aspects of a design process. Have been delegated major assignments with significant client base.

Training Experience

* Acquired a certificate from the American Society of Mechanical Engineers upon attending "Section VIII, Division 2 Pressure Vessels" training class.
* Acquired training certificates from Siemens Westinghouse in a variety of Power Generation Industry equipments such as combustion turbine, steam turbine, combustion turbine performance and design and project management.
* Acquired a certificate from the American Management Association "AMA" from participating in Project Management with Suretrak Course.

Publications
* I have published a paper at the ASME International Gas turbine Institute titled "Comparison to various Tube to Header Attachment Detail Under Cyclic Service".

Awards
* I was awarded two performance awards in recognition of the outstanding contribution to the success of Siemens Westinghouse.
* Received a spot award as a result of dedicated support to other groups to meet project deadline

Computer Experience:
Microsoft Office 97,98, 2000, Master Series (Ideas), MatLab, AutoCad, Mathcad, Micro Station, Ansys, Pro-E and Gate Cycle.

References:
Professional references are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 2552)

Go to Search Parameters...

Brief Description

Geologist

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Quality dozer/blade/excavator operator in all aspects of construction

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

BSc + Fire + Safety + Experienced

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Power plant engineer involved in a variety of power plant equipment design and commissioning.

Project Control, Corporate Treasury, ERP Application Consultants

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Metallurgical Engineer Fresh Graduate, Metallurgist

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

Around five years of experience in the field of heavy fabrication, planning, estimation, procurement, execution, QA/QC activities, designs and production for EPC projects.

Project Planning and Management, and Procurement / Purchasing

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

QA/QC Inspector cum Engineer

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Accounts Professional having 5.8 years of an experience.

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

Corrosion, Cathodic Protection, Quality Control, Metallurgy

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Very good analytical and project management skill. Do multi tasking and road warrior.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

Licensing, installing and configuring Windows Server 2003. Licensing, installing and configuring Active Directory. • Managing physical and logical disc. Configuring terminal services. Managing, monitoring and securing Windows Server 2003 resources. Managing user, group and computer accounts i

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

B.E. Mechanical. Five plus years of experience in Project Management, Construction Management, Logistics, Budgeting, Cost Estimation, Materials Management, Resource Planning in Construction sector.

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Possess 5 year s experience in Administrator Buyer and Planner .In depth practical knowledge management skill in logistic or admin. Mature with strong work ethic towards team support or report dateline. Proficient in both spoken and written English and Bahasa Malaysia and advantage 1 native language

Planning, Scheduling, Primavera, Risk management, Pertmaster

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Human Resources Generalist

B2B Marketing, Product Development, Dealer Management, Market Research

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

I believe my experience in organization, projects and maintenance in the world largest methanol - petrochemical production site and other experience in foreign trade can help in implementation of your company's highest production, organisational and marketing standards.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out