Resume - Chemical Engineer with Environmental Engineering experience

Misco Jobs

Resume #9747

CONTACT INFORMATION:
View contact information...

Project Management/Project Controls Training, 1997.
Jacobs Total Quality Management (TQM) Training, 1998.
Asbestos Supervisor, Asbestos Hazard Emergency Response Act (AHERA), 1989.
Engineer-In-Training, 1984.
Professional Engineer, 2000, 2002, 2004.
Asbestos Site Supervisor, Minnesota Department of Health (MDH), 2002, 2003.

CLEARANCE
Department of Energy "Q" Clearance (Inactive)
Department of Defense Secret Clearance (Inactive)
Department of Transportation Security Clearance (Active)

WORK EXPERIENCE AND QUALIFICATIONS
3/96-8/04 PROCESS ENGINEER/PROJECT ENGINEER, Jacobs Engineering Group; Baltimore, Maryland.
Project Test Engineer for the Department of Army Chem. Demil. Program "Speedy Neut" program. Performed engineering reviews, prepared specifications, engineering calculations, environmental engineering support, and operations support of a prototype Modular Agent Treatment System (MATS).
As Project Test Director provided supervision of installation crews for upgrades to the Army RTAP mobile laboratories. Inspector for factory acceptance testing, final checkout, and release of upgraded vehicles to the Army for their use. Job also required training of operators working with the new installation upgrades, troubleshooting, engineering support, equipment repair, and preparation of technical manuals including the RTAP Operations and Maintenance (O&M) manual. Successful project lead to follow on work.
Test Director of Mustard Thaw Conditioning System (MTS), managing systemization and start-up operations. Provided start-up and testing of process engineering modules for MTS. Performed troubleshooting functions, process modifications, PLC and instrumentation upgrades, operator training, PSM, and operations support. Prototype was successful securing additional work for agent destruction.
Field Office Environmental Manager for Federal Aviation Administration (FAA) Air Regional Traffic Control Center (ARTCC) asbestos removal projects. Coordinated with FAA and contractor personnel for asbestos removal activities. Project includes contractor oversight, preparation of site-specific work plans, health and safety plans, operating procedures, and reports. Responsibilities include performing surveillance during pre-cleaning, preparation, removal, and demolition; performing pre-removal and pre-encapsulation inspections; and overseeing personal and review of ambient air monitoring data during hazmat abatement activities. Conducted health and safety reviews, reports, and managed abatement subcontractor from inside a containment area during the renovation of an occupied secure building.
Project Engineer/Task Manager for General Waste Management (WM) task provided support to the Paducah Gaseous Diffusion Plant (PGDP) DOE Site Office and now Bechtel Jacobs Company, LLC. Team Leader in charge of several Task Managers for several PGDP Waste Management projects. Responsibilities include resolution of budget issues, resource commitments, forecasting, scheduling, management reviews, and statements of work. Prepared budget and labor projections, schedules, funding requests, Project Execution Plans, project notes, and other mixed waste management task-related duties.
Process Engineer for the Vortec Vitrification system Operations and Maintenance (O&M) manual. Prepared process start-up and maintenance instructions for the O&M manual, and reviewed vendor data, process and instrumentation diagrams (P&IDs), process flowsheets, instrumentation and controls (I&C), specifications, cost estimates, etc.
Prepared Evaluation of Vortec Vitrification System Radionuclide Waste-Water Discharges at PGDP, examining DOE Orders, reviewed recommended Derived Concentration Guides (DCGs) for radionuclides and recommended radionuclide discharge limits for PGDP's vitrification system. Performed engineering and health physics calculations on a computer spreadsheet, evaluated process parameters, designed wastewater discharge system in the outfall and recommended discharge flowrates.
Conducted a process engineering review of the Environmental Assessment for the Proposed Treatment of Mixed Wastes at the Paducah Gaseous Diffusion Plant by Using the Vortec Vitrification System.
Prepared white paper reports: Evaluation of Incineration versus Vitrification Technologies at the PGDP; Evaluation of the Waste Information Tracking System; and Lessons Learned for the C-746-U PGDP Solid Waste Landfill. Examined mixed waste management issues and provided recommendations.
Served as Task Manager for the Integrated Waste Management Plan (IWMP) for the PGDP, identifying chemical and radiological waste inventories, treatment technologies, and providing waste reduction recommendations. Reviewed plans for removal of PCB-contaminated asbestos gaskets.

5/90-10/95 SENIOR ENVIRONMENTAL ENGINEER, Analysas Corporation; Oak Ridge, Tennessee.
Prepared the annual site environmental reports (ASERs) for Bechtel Environmental Corporation managed by DOE under the Formerly Utilized Site Remedial Action Program (FUSRAP). Prepared and reviewed Environmental Monitoring Plans (EMPs) for FUSRAP sites; reviews included Quality Assurance (QA)/Quality Control (QC) to ensure compliance with applicable regulatory requirements and DOE Orders.
Performed radiological dose calculations for hypothetical accident scenarios for FUSRAP Sites.
Reviewed engineering documents and drawings, conceptual design reports (CDRs), and cost estimates for DOE environmental projects.
Assisted DOE Environmental Engineers in compliance activities, appraisals, and site inspections. Consultations with DOE personnel and subcontractors required use of extensive knowledge of RCRA; TSCA; the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); CWA; the Clean Air Act (CAA); NEPA; NHPA; AHERA; and other state and federal environmental regulations as well as DOE Orders. Conducted surveillances, walk-throughs, and periodic audits with DOE personnel to ensure compliance. Reviewed plans for transite (asbestos) removal of the K-25 Cooling Towers.
Prepared a Close-Out Report for the K-25 Decontamination and Decommissioning (D&D) Electrical Compliance Project. Also prepared Project Plans for the K-25 D&D Program.
Prepared a Chemical and Radiological Sampling Plan for the City of Oak Ridge Substation 800 Site.
Coordinated NEPA efforts between DOE/HQ, DOE/ORO, and Martin Marietta Energy Systems and reported environmental data accordingly while at the PGDP DOE site office.
Provided support to the DOE ORO NEPA Compliance Officer (NCO) at the Environmental Protection Division (ENVPD), including technical review of NEPA documents. Also provided support to the DOE ORO CRMC, assisting in the preparation of reports and Memoranda of Agreement (MOA) in accordance with Section 106 of the NHPA.
Prepared several EAs for the PGDP including Construction and Operation of the Waste Storage Facilities at the Paducah Gaseous Diffusion Plant and Construction and Operation of the Solid Waste Landfill at the Paducah Gaseous Diffusion Plant. Functioned as a technical liaison between the PGDP and DOE ORO personnel, and assisted in securing a FONSI for these EAs. Assisted in providing NEPA training for DOE ORO personnel and contractors.
Fully versed in waste treatment technologies, including bioremediation, soil vapor extraction (SVE), soil washing, in-situ electro-thermal treatment, and other innovative treatment technologies for soil and groundwater clean up. Gained full knowledge of computer programs such as VISITT and ReOpt, and used them to select innovative treatment technologies.
Participated on the Tiger Team verification for Portsmouth Gaseous Diffusion Plant. As Tiger Team member, verified that the findings were closed as stated using interview and other investigative techniques.

4/88-5/90 ENVIRONMENTAL ENGINEER, Peer Consultants, P.C.; Oak Ridge, Tennessee.
Performed environmental studies for several U.S. Air Force bases under the Hazardous Waste Remedial Actions Program (HAZWRAP). Executed waste minimization studies, performed pretreatment evaluations, assessed alternate disposal methods, and prepared preliminary assessments. Also performed waste minimization activities including inventory of chemicals used in facilities, computerized characterization of hazardous materials, recommendations for reuse, recovery, and/or proper disposal of hazardous materials, cost analyses, and report preparation.
Team leader for preparation of RCRA permit and postclosure plan applications. Team leader for several asbestos removal projects for the Department of the Navy. Performed engineering design of containment areas in compliance with AHERA, state, and local standards for asbestos removal. Prepared cost estimates of containment areas. Certified as Asbestos Supervisor.
Conducted Phase I and II assessments of Air Force and Air National Guard bases.
Organized and implemented standards for the computer-aided design (CAD) system.
Prepared a (white paper) report for the PGDP entitled, Evaluation of Cooling Tower Lumber at the PGDP, reviewing current disposal practices of pentachlorophenol treated wood, foreseeing regulatory changes, and recommending disposal alternatives to minimize future mitigation actions.
Performed technical reviews of Safety Analysis Reports (SARs). Reviews required using chemical process knowledge of uranium processing, uranium salvage operations, and material handling at the DOE Y-12 Weapons Facility. Also assisted in HAZOPS reviews.
Assisted in developing the QA Plan for the DOE to monitor the K-25 TSCA incinerator trial burns.
Participated in the TSCA Incinerator Fan Accident Investigation team.

8/86-4/88 PROJECT ENGINEER/CONSULTANT, International Technology Corporation; Knoxville, Tennessee.
Managed engineering activities and assisted in the design of several hazardous waste treatment, storage, and disposal (TSD) facilities. Performed design improvements to Hybrid Thermal Treatment System (HTTS) incinerator system.
Prepared flowsheets and P&IDs, performed hydraulic calculations, equipment sizing and selection, and specifications for several wastewater (WWT) and hazardous waste treatment facilities including incinerators, thermal desorbers, and supporting infrastructure.
Assisted in processing RCRA and TSCA permit applications for hazardous waste treatment facilities.
Assumed responsibility for activities involving metals removal, carbon absorption (GAC), stripping, solvent recovery, incineration, waste minimization, and alternate waste treatment technologies.

10/84-8/86 LEAD ENGINEER, STV/Sanders & Thomas, Inc.; Oak Ridge, Tennessee.
Served as Project Engineer and Project Manager for two hazardous radioactive waste management projects for the DOE's Enriched Uranium Recovery Improvements (EURI) program.
Designed tunnel furnace line including gloveboxes, conveyors, instrumentation and controls, solids feeders, and ventilation system for the EURI program.
Designed enriched uranium recovery incineration system including incinerator feed and ash removal systems, air pollution control system, glovebox stations, conveyors, instrumentation and controls, solids feeders, fire protection, and ventilation systems for the EURI program.
Performed process engineering: conducted heat transfer calculations, heat and material balances, and P&IDs; and performed process and equipment control design, process control and instrumentation selection, and prepared technical specifications for equipment and instrumentation.
Assumed project management responsibilities, including coordination of design activities, scheduling, budget preparation, labor estimates, cost controls, labor projections, resource allocations, and client interactions.

1/84-10/84 PROJECT ENGINEER/CONSULTANT, Quadrex Corporation; Oak Ridge, Tennessee.
Provided engineering design services for radiological decontamination processes including bead blast decontamination systems, freon decontamination systems, and electropolishing facility. Reviewed process operations, suggested process improvements to satisfy environmental, health and safety, and process operations.
Assisted Plant Engineer in process evaluation and design retrofits, replacing the wet processing systems with dry decontamination systems. Also reviewed the industrial wastewater system for the facility, suggesting process improvements.

6/83-12/83 SENIOR PROJECT ENGINEER/CONSULTANT, Technology for Energy Corporation; Knoxville, Tennessee.
Developed technical specifications, installation, and testing procedures for isokinetic radiation air monitoring instruments and equipment.
Implemented the development of a liquid radiation monitoring system prototype for a nuclear power plant. Completed process design and produced P&IDs, line sizing, and hydraulic calculations. Assisted shop personnel in fabrication of the prototype system.
Coordinated the seismic testing of radiation monitoring system for the Clinch River Breeder Reactor Project.

10/82-3/83 SENIOR ENGINEER, Lockwood Green Engineers; Oak Ridge, Tennessee.
Performed process design of several operations to improve the efficiency of radioactive waste reprocessing for a nuclear feed materials processing center (FMPC) in Fernald, Ohio.
Prepared equipment and piping specifications, conceptual design criteria and reports, and health and safety reports for a nuclear material production facility (Y-12 Plant).
Conducted field surveys, assisting design engineers for the Oak Ridge National Laboratory (ORNL) hot vent gas piping system.

5/80-8/82 Two Divisions of FLUOR/DANIEL INTERNATIONAL
ENGINEER, Daniel International Corporation; Hopewell, Virginia.
Prepared equipment specifications and requests for quotations. Prepared process and mechanical design renovations for a chlor-alkali facility.
Performed bid analysis and provided recommendations. Prepared equipment requisitions and performed engineering functions: hydraulic calculations, valve and line sizing, and pump selection.
PROCESS ENGINEER, Applied Engineering Company; Orangeburg, South Carolina.
Served as Lead Process Engineer for several $1.5 million double-effect caustic evaporator systems with hot water recovery systems: completed design and assisted with procurement, fabrication, and start-up.
Project Manager for $90,000 chlorine vaporization system for a paper-mill bleaching process. Procured equipment and oversaw fabrication of skid-mounted equipment.
Developed process designs for various chemical production plants including natural gas, dimethyl ether, sodium hydroxide, synfuels, gasification, and energy-related projects. All projects were designed as skid-mounted modular equipment and process systems.
Utilized computer programs for process design and for heat exchanger design and rating; and programmed with FORTRAN and BASIC. Also developed computer programs to rate heat exchangers and to calculate the return on investment (ROI) of capital projects. Extensive experience in heat exchanger design and rating; hydraulic calculations, P&IDs, process control, and corrosion prevention.

7/79-5/80 SENIOR APPLICATION ENGINEER, American Standard Heat Transfer Division; Buffalo, New York.
Engineered and designed shell and tube and plate and frame heat exchangers, rated equipment, prepared specifications, and provided quotations to sales inquiries.
Provided technical support to both clients and field sales personnel.
Evaluated inquiry requirements and determined suitability for quotation; modified and adapted standard and engineered heat transfer equipment to satisfy specific applications. Determined prices for engineered heat exchangers, and evaluated special designs.
Generated over $500,000 in sales in less than six months.

6/78-7/79 SALES APPLICATION ENGINEER, APV Company, Inc.; Tonawanda, New York.
Developed process design applications, and price estimates for heat exchangers, evaporators and other process equipment, and prepared company proposals, equipment requisitions, and sales quotations.
Performed plant layout, process piping layouts and system design as a Project Engineer for double-effect pineapple juice evaporator installed in the West Indies.
Created and maintained customer relations, prepared sales letters, cost analysis, and marketing surveys.
Performed general engineering duties of equipment sizing, heat and material balances, hydraulic calculations, process control, P&IDs, materials of construction selection, and elastomer gasket selection.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2551)

Go to Search Parameters...

Brief Description

Excellent team working skills, Excellent negotiation skills, capable of working under pressure and meeting deadlines, high quality customer service skills, and high quality communications skills

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Have some supervisiory and Electronic training

Experienced Administration analyst with areas of expertise in Strategic management, Finance, Logistics and supply chain, Contracts Administration, Business Administration along with latest british MBM degree in Business Management

Over 12 years of qualitative experience in Refinery, Oil/Gas and Petrochemical Plant.

I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

International HR Manager

HSE Engineer with Quality experience, consultant, Mechanical Engineer

I have a comprehensive knowledge of Industrial Health,Safety &Environment with focus on Oil & Gas and construction industry safety, HSE Training, Inspection of facilities for proper HSE management system. Hazard & operability studies of Projects & sites' Job Safety Hazard Analysis & risk assessment.

Procurement Management, Project Manager, Expeditor, Logistics, Scheduler, Material Manager, Buyer, Purchaser, Contract Administration, Bilingual Spanish, Pricing and Biding, Quality Assurance

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

I am a South African currently living in Ghana. I am looking for opportunities in Finance. I have extensive experience from working in Nigeria and Ghana.

Principal Consultant, BSc (Hons). MSc. DIC. 8 Yrs experience in Contaminated Land assessment and Remediation.

QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.

HSE advisor to the upstream oil & gas industry with 13 years experience in Australia, Russia, Nigeria and the Middle East.

Chemical Engineer with Environmental Engineering experience

Maintenance Planner - Mechanical Engineer

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Senior Mechanical Engineer, Bachelor Of Engineering

Cwi/QA/QC Manager

Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.

Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.

Operations Manager or Shift Supervisor in a Power Plant

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Master in mechanical engineering (ENIT)

I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.

Proposals & Contracts, Commercials, Process & Technologies, Project Management

Project Management / Engineering Coordination / Process Engineering / Business Development

CA, CIA, CPA

I am Commerce Graduate, Fellow member of ICSI (FCS) and Microsoft Certified Professional (MCP) with 13 years of work experience in Finance, Accounts, Company Affairs and Statutory Compliances.

Senior Instrumentation & Control and Telecom-SCADA Engineer

Instrumentation & Commissioning Analyzer Engineer

Innovative thinker with broad-based expertise in human resources, and business development.

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

Financial Manager (expat)

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

I have a master degree in Chemistry and post graduates in International Law and Ecology. I have worked as an HSE specialist for more then 13 years.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

Programming Languages: C, Embedded C & Assembly level programming for ƒÝP and ƒÝC ,8 Bit (8051, PIC), 16/32 Bit processor (ARM7 TDMI), PIC 16F73, 8051, ARM7,PCB Designing using Or CAD,RS 232, SPI, IIC, CAN V2.0,MS Windows 9x and upward,networking, service manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out