Resume - Engineer with land and offshore oil and gas experience. Diverse knowledge of saf...

Misco Jobs

Resume #9941

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Obtain a position as a drilling supervisor or on a drilling staff, focusing on the drilling and completion aspect that will allow me to utilize my knowledge and years of experience in the oil & gas industry.

SUMMARY OF QUALIFICATIONS
Engineer having a wide array of land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control. Drilled wells to 21,000', with them being horizontal, directional and extended reach. Have experience drilling under balanced, HTHP and H2S wells. Using PDC bi-center bits, LWD/PWD/MWD, rotating heads, water and oil base muds. Have the ability to organize multiple projects, team oriented and computer literate with good written and verbal communication skills. Committed to maintaining a working environment that is safe and productive. A straightforward communicator with excellent problem solving skills who will represent the operator in a safe and professional manner.

PROFESSIONAL EXPERIENCE
New Tech Engineering Houston, TX
1/2004 to Present
Senior Contract Drilling Supervisor
* Working offshore Santa Barbara, California on a platform rig in 835' of water doing re-completions & preparing to drill two extended reach wells in the most environmentally sensitive area in the world. The re-completions utilized dual strings to produce an upper zone while injecting water in the lower. One completion required a triple string of tubing. The extended reach wells will have a TVD of 6000' and 19,500' MD.
* Drilled three very challenging under balanced horizontals on land for Ogden Resources. With one being a re-entry utilizing a whip stock to build the curve. Successfully drilled a fifth lateral in the same formation on one well
* Supervised the stripping and well control operations for Magnum Hunter Resources on a well that had been swabbed in while tripping out of hole. Well had surface pressure of 4200 psi with 17.3-ppg oil based mud in the hole.
* Re-entered a well for Adams Resources that had a hole in the production casing and was to be P/A'ed. Set a 5-1/2" drilling liner at 15 degrees. Drilled under balanced up and down dip "turnazontal" laterals. Saving the well and increasing the production for the operator.

El Paso Production Co. Houston, TX.
1/2002 – 1/2004
Drilling and Completion Supervisor in the Gulf of Mexico
* Worked a rotation on a jack-up drilling rig as a drilling supervisor for El Paso Production in the "Deep Shelf Gas" play. Supervised daily operations, safety programs, drilling, completion, logistics, plug & abandonment. Drilled all wells at or under AFE with no lost time accidents.
* Wells being HTHP, having H2S and very challenging to depths of 21,000' with mud weights to 18.5 ppg. Utilizing oil and water based muds, PDC bi-center bits, downhole motors, drilling gyros, LWD/MWD/PWD's and top drives. Ran or drove casing strings, liner hangers and liners ranging in size from 60" to 5". Performed cementing of casing strings and squeeze cementing.
* Coordination of logistics for equipment and personnel. Responsible for well control, daily reports, safety meetings, forecasts, environmental spills, MMS, stop card program and the interaction with production.
* Completed wells drilled using zinc bromide and calcium chloride with weights up to 16.5ppg. Procedures used during completions were wire line, open and cased hole logging, perforation with TCP, downhole gauges, rig run seismic, running production tubing, sand screens, sub-surface safety control valves, packers, installed well heads, well testing, plug & abandonment. Supervised high rate gravel packs.
* Completed one well on the TLP Prince in 1500' of water.
* Computer programs utilized: Dims, Perc, Excel, well control kill sheet, bit hydraulics programs, casing and cementing reports.

R.W. Dirks Engineering Tulia, TX.
9/2001 – 1/2002
Drilling and Completion Consultant
* Completed newly drilled horizontal and vertical wells.
* Reentered P/A'ed wells to test different zones.
* Converted flowing wells to rod pump; set pumping units, rod and pump design, well head conversion, tank battery modifications.
* P/A'ed non-economical and problem wells.

Unidril LP. MWD Co. Houston, TX
1/2001 – 9/2001
Operations Coordinator
* Supervised shop activities, personnel and field operations. Dealt with problems that arose at well sites such as tool failures, tools stuck or lost in hole, personnel and logistics. Ran MWD on problem wells and when needed.
* Assisted in the drilling of HPHT, Short Radius, Multilateral, re-entry and side tracked wells to a depth of 15,000'.
* Trained new personnel on operation of the MWD in the field.
* Worked and coordinated jobs in TX, NM, OK, LA, and WY

Express Oil & Gas Dilley, TX
1/1990 – 1/2001
Drilling and Production Manager
* Provided field supervision for onshore drilling, completion, fishing, production and work-over operations on vertical and horizontal wells to depths of 10K' feet using brine water and mud systems with weights to 10.0 ppg and temps to 220° F and H2S being present.
* Directed day to day production operations in South Texas. Implemented operational improvements, cost reductions and ensure adherence to State regulations.
* Supervised the drilling and/or cleaning out of open-hole horizontal laterals (4 being multi-laterals) using rotary, work-over, power swivel coil tubing in under-balanced/no returns operations. Developed procedure using acid to dissolve obstructions in open hole laterals that is widely used today.
* Prepared AFE's, operation and safety procedures, daily and month reports.
* Designed, implemented and monitored a corrosion protection system for various field gathering systems.
* Identified, permitted and supervised the plug and abandonment of non-economic wells.
* Performed coil tubing clean-out and stimulation operations using pipe sizes up to 1-1/2" to 10M psi.
* Experienced in troubleshooting and solving problem pumping & ESP wells.
* Vast knowledge of ESP's, identifying a candidate well, sizing of pump and motor, improve run time, fishing for a lost pump in an open hole horizontal.
* Sized, purchased and installed pumping and roto-flex units with insert/tubing pumps, ESP's, production equipment, tank batteries, and compressor stations.

EDUCATION and CURRENT CERTIFICATIONS
* 12/89 Southwest Texas State University San Marcos, TX.
Bachelor of Science
* 8/03 Total Safety Training Services Houma, LA.
H2S Certification
* 05/01 Geolink MWD School Aberdeen, Scotland
- Trained in operation, software, directional steering
- Techniques and troubleshooting of modern MWD/LWD's
* 1/04 Randy Smith Well Control School Houston, TX.
- MMS and IADC Certified
- Completed Drilling, Well Completion, Workover and
- Well servicing at the Supervisor level with
- Surface & Subsea Stack Qualification
* 05/02 WCS Stuck Pipe course Houston, TX.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2546)

Go to Search Parameters...

Brief Description

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

Software engineer

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

International Project, Construction, and Contract Management

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Enviromental Geological Engineer and Regulatory Affairs Manager

I am an environmental professional with 20+ years of experience in private industry, county government and non-profit marine research. Areas of expertise include management and development of technical and non-technical staff; development of outreach programs, budget planning and management.

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

Senior Planning Engineer - 13 years Oil&Gas experience

To provide information in respect of the background.

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Construction Manager in Harbour and river construction, Offshore construction, Marine works, Land fall pipe installation, Dredging, Post trenching, Pipe laying, Tie in, Diving

Worked across the procurement department on all categories including the management and administration of the entire procurement operation (sourcing, purchasing, 3rd party inspection, expediting, logistic, customs clearance, and warehousing) on a cradle-to-grave basis for EPC pipeline projects

12 years of experience in the contracts and project management in Oil & Gas EPC Projects, including 7 years working in Dubai. MBA ( Finance) graduate from Texas A&M International University and Engineering undegraduate from Cochin University in 1995.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

I have over 10 years experience in the field of Safety in both the construction and process industries. I have substantial hands on experience working in maintenance, plant shutdowns, and fabrication & installation of Mechanical, Piping and Structural steel work.

I received my Master Degree in Public Management in Bocconi, Milan. I would like to use all my knowledge in such sector like Public Affairs, Human Resources, Governance.

Am eager to work & learn in any environment with 100% flexibility of location of job. Am very optimistic that the exp gained so far would allow me to make productive contribution to your company. Given an opportunity for discussion I am sure I shall be on par with your expectations & requirement

Human Resource Manager, My outgoing personality, my leadership and management experience, and my recently completed education make me a strong candidate for an entry-level position.

I need a good job in any of the oil or the gas companies and any sector!

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

I have 14 years of experience in Human Resources Management, Business Planning, Sales, and Customer Service in leading organizations in Egypt and abroad.

Over 15 Years of rich experience in Engineering Procurement & Construction projects for Oil , Gas , Petrochemical , Power Plant & Ports .

I am engineering graduate in Mechanical from Shadan College Of Engineering, JNTU, India having around 7 years of experience in the field of Electronics/Mechanical related with Projects/Maintenance. I joined Saudi Perfume and Cosmetics Industry-Jeddah, one of the largest manufacturer of perfume.

Bachelor of Technology in Chemical Engineering from Govt.Engineering college Thrissur, Kerala, India. (2002-2006).

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

Oil and gas exploration and construction consultant with twenty years worldwide experience seeks project, contract, or position

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Where my experience, Education,training and good work habits will be an asset to your company.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

IT Project /Transition/Deployment/Service Delivery Manager

Chartered Accountant with three years experience in Oil and Gas Industry

Experice engineer with project engineering and project managemnt

Enthusiastic, results-oriented geologist with experience in mineral/oil & gas leasing programs

19 years of International Project Management experience, excellent communication skills at all levels. Highly organized dedicated and reliable employee, thrives under pressure. Very good computer skills, user of Microsoft Office and various accounting software SAGE, JDE, Tally & Enterprise

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Having some experiences to work in a team which done by foreigner partners that means joint cooperation with universities abroad. Pointed as team leader and should responsible my work to chief party.

I have over 25 years experience in management and marketing. I also have been involved in realestate and oil and gas business for 3 years.

Administration and Management.

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out