Resume - Working as Mechanical Maintenance Supervisor.

Misco Jobs

Resume #10274

CONTACT INFORMATION:
View contact information...

Career Objective:-

Dear Messrs,

This is Ehab Monir, currently working as Maintenance & Workshop Supervisor at Integrated Drilling Services - Egypt (IDSE), reporting to the Operations Manager.
I¡¦m also responsible for the IT activities from Jan, 2001.

IDSE specializes in Measurement While Drilling (MWD) and Directional Drilling Services. The company has been providing its services in Egypt since 1994, for major oil and gas companies.

From December 1991 until March 1997, I was an Employee at Gulf Of Suez Petroleum Company (Gupco), BP's joint venture with the Egyptian General Petroleum Company. I was working as Turbines Maintenance and Operations Supervisor at the Turbines Operations & Maintenance Department - Maintenance Division, supervising the maintenance & Operations activates at JULY#10 Offshore GasLift platform - Ras-Shukheir, Red Sea.

Hope my qualifications would match one of the openings at your organization.

My career objective is to win a dynamic and challenging post in a big organization. This post should take full advantage of my previous experiences, including my communication abilities. I do have strong preference to positions that permit continuous self-development and promotion in a well-defined organizational structure.

Specialized in Mechanical Production, I was graduated in 1991 from Cairo University, Faculty of Engineering. You'll find more detailed information concerning my technical and academic background in addition to my current responsibilities in IDSE & GUPCO in the resume attached.

PROFESSIONAL EXPERIENCE:

From March 15, 1997 - Present

Company: Integrated Drilling Services Limited EGYPT (IDSE), X-Middle East Regional Branch of IDS SCOTLAND, UK.

Position: Maintenance & Workshop Supervisor in addition to IT activities.

Responsibilities:

* Supervise the maintenance activities at the Drilling Workshop including testing and Maintaining the following down hole MWD tools:
* Transmitters " MWD Pulser "(Maintenance & overhauling)
* Actuator power controller APC, Batteries, Survey electronic assembly
* Surface gears (system interface box, rig floor display, cables,)
* Preparing documents for participating in tenders inside & outside country including daily / monthly operating / maintenance cost, administration cost, profit Margin, company Brochures, maintenance records, activity history, ¡Ketc
* Preparing Budget for maintenance / operations for every project according to the expected number of proposed wells.
* Responsible for IDSE warehouse spare parts inventory.
* Improving performance of MWD tools by applying best maintenance techniques with maximum productivity / availability and optimum cost reduction for drilling equipment.
* Responsible for IT activities including Software and Hardware installation / maintenance.
* Responsible for PEACHTREE Accounting software (Automated Accounting system for Financial reports, Inventory Control, maintenance / operations cost, Invoice register¡K etc)
* Performed maintenance for Baker Libya ( BHI Libya - Tripoli - Libya)
* Responsible for IDSE Database & Score Cards.

From Dec 91 to March 97

Company: Gulf Of Suez Petroleum Co. ¡* GUPCO - BP (AMOCO)¡¨

Position: Turbines Operation & Maintenance Supervisor

Location: JULY # 10 & SHOAB ALI Offshore Gaslift Platforms
Ras Shukheir - Red Sea

Responsibilities:

* Operation & maintenance of Industrial gas turbines ¡* ALLISON Gas Turbines Type KC & KC5¡¨.
* Prepare & issue the business plan concerning optimizing down time, availability, cost, major jobs and overhauls for the next years.
* Co-ordinate with other departments and the Barge for major project performed on the platform using MS Project Management.
* Supervise the implementation of preventive & predictive maintenance according to plan.
* Inspection & replacing of the engine, power turbine & hot section. Tear down & inspection of the turbine hot section.
* Operation, maintenance & overhauling I-R centrifugal gas compressors.
* Alignment of the gas compressor, power turbine and gear box.
* Operation of the whole p/f (including generators, pumps, air compressors. ....).
* Improving availability of the whole platform by decreasing down times due to shut downs, waiting materials, raising personnel skills....etc.
* Calibration for monitors, modules, switches & control panel.
* Optimizing the availability of ware house stock.
* Preparing periodic score cards for package performance, cost, availability & down time

From 1991 to 1996: Part Time Job

Sales Engineer at TEIBA Eng. Company for Industrial and Electrical Supplies (Family Business)

EDUCATION:

* B.Sc. Mechanical Engineering (Mech. Design & Prod. Dept.)
Faculty of Engineering, CAIRO University - May 1991
Grade: Good
Project: Design & Manufacturing a mechanical cultivator using AutoCAD and AutoLisp
Project Degree: Distinction

* Secondary Graduation: G.C.E. ( From The British Council In Cairo) - 1986

Skills & Training Courses:

Technical:

1) Transmitter (MWD Pulser) maintenance @ GEOLINK CO- SCOTLAND, UK.
2) Maintenance training @ IDS workshop.- SCOTLAND, UK.
3) Vibration monitoring & analysis (A.U.C.)
4) Vibration analysis ( GUPCO vibration sector @ R/Sh )
5) Alignment & balancing ( Natcom Co. R/Sh )
6) Microprocessors in control system & instrumentation

Technical: cont.

7) Complementary maintenance systems. (Arac Center, Cairo)
8) Hydraulic circuits & controls - GUPCO.
9) Electrical & electronic training (R/Sh) - GUPCO.
10) Anti Surge system & controls - GUPCO.

Managerial:
1) Gupco performance management GPM - GUPCO.
2) Improving Supervision Skills - GUPCO.

Computer:
1) Microsoft Windows (3.11, 95, 98, 2000, Me, XP)
2) Microsoft Word, Excel, Access, Power Point
3) Microsoft Project Management. (From 1994 - 1997)
4) Auto Cad, Auto Lisp. (From 1988 - 1996)
5) Adobe Photoshop, Harvard Graphics
6) Maximo (Gupco computerized maintenance program) - GUPCO.
7) MWD - Drilling Software

Safety:
1) Safety & fire fighting systems - GUPCO.
2) First Aid - GUPCO.
3) H2S Hazards & Protection - GUPCO.

Detailed Personal Data:

Birth date: 12th August, 1969
Nationality: Egyptian.
Military Status: Exempted.
Marital Status: Married.

* References will be available upon request.

Signature

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 6511)

Go to Search Parameters...

Brief Description

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

6 years experience in Drilling Rigs,shipping &Oil & Gas field as a Piping Designer.

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

Simulation Engineer

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Project Engineer / Manager

Petroleum Engineer with experience in Chemical Treatment.

I graduated from Technology Industry School in 1988. I worked for PT Arun LNG.Co. for 11 year since Nov.1989 to March 2001. I have been working for Qatar Petroleum as Senior Laboratory Techinician since March 2001 to present.

vender inspection, Inspection of internal & external coating for steel pipes, pipe fabrication (LSAW&HSAW), NDT methods witness(RT,UT,MPT & LPT).

A good worker, I do my best.

I would like to inform you that I (RAVI KUMAR PALLELA, S/o RUDRAYYA) completed my degree in B.E (Production) discipline with 70.3% in First Class with Distinction from Swami Ramanand Theerth Marathwada University, Nanded in the year 1999. I Have More than 6 ½ Years experience in CAD/CAM area.

Highly qualified in 3D modeling and design as well as control and instrumentation

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Area of expertise is ranging from Preliminary and Details Design, Construction

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

Safety officer with knowledge in Windows and MS Applications

Capable of carrying maintenance and operation for several systems including steam system preparation and monitoring (boilers ''water tube type''-steam lines-steam turbines).

Petroleum Engineering Technologist. Drilling, Production, Reservoir.

Automation Engineer

M.Tech in Chemical Engineering. Presently working with Bechtel as an Process Engineer.

piping design engg

Working as Process Engineer. I have done M.Tech in Chemical Engineering & having 2 years of experience in the field of oil & gas processing.

Working experience of Water-Based Fire Suppresion Systems, Sprinkler Systems, Foam Systems, Passive Fire Protection Systems, Safety & Fire Fighting Equipment, Fire & Gas Systems,Standpipe Systems, Hazardous Area Classification, HAZOP, Man-hour estimation for proposals etc.

Process engineer

Automation

Materials Control, Handling, Storage, Warehousing

I have 15 years experience in petrochemicals plants

Almost 10 years experience in detail engineering and construction for oil & gas, and petrochemical industry for Onshore LNG Plant, Onshore Gas Plant, Onshore Oil Gathering Station, Welhead Platforms, and Onshore/Offshore Pipeline, for clients such as: BP, PTT E & P (Thailand), PT Badak NGL, Caltex,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out