Resume - Experience in reliabilty centered maintenance and Mechanical Integrity. Extensi...

Misco Jobs

Resume #10529

CONTACT INFORMATION:
View contact information...

PROFILE
* Twenty two years of combined experience in Chemical/ Petrochemical indtusries.
* Extensive experience in reliability centered maintenance and mechanical integrity.
* Pro-active on Safety and enviromental compliance issues.
* Extensive capital project experience.
* Strong analytic and problem solving skills such as RCA.
* Great skills in communication and teamwork.
* Familiar with MTBF, MTTR, and maintenance plan/ strategy for individual rotating and stationary equipments.

PROFESSIONAL HISTORY
(1999 to present) Degussa Corp. Theodore, AL.
Plant Engineer Supervisor
Provided organization, planning, direction and control of maintenance, technical changes/ improvements and technical documentation for a production plant. Provide technical expertise to maintain and continuously improve chemical production of a plant in order to minimize cost, insure the technical means for a safe operation and high product quality at guaranteed desired plant availability. Reduced maintenance budget through the implementation of a Reliability Centered Maintenance program through evaluation of top 10 cost drivers, Pareto analysis of cost of repairs, examination of failure modes based symptoms leading to failure. Establish a suitable preventive and predictive maintenance programs using technology to monitor the development of failure mode symptoms. Utilize Root cause analysis and Key Performance Indicators to monitor, improve and achieve goals with team effort concept.
-Reduced mechanical seal repair cost from 95T$ in 2000 to 30T$ in 2003 this was achieved by upgrading material of construction, use AES seals, install seal pots with cooling coils, install flow switches, power monitor units, train operators..
-Implemented rigorous root cause analysis of failures with continuous analysis of maintenance cost this resulted in reduction of maintenance cost of 3.865 $MM in 2001 to 3.304 $MM in 2003. Reduction of maintenance man-hours from 26,000/ year to 21,000 for the same period.
- Reduced maintenance cost to plant asset replacement (KI) value from 3.20% in1999 to 2.58% in 2002.
-Replaced a glass lined column and re-boiler in a corrosive service to Hastelloy C2000 alloy this was a success that translated to 80 $T annual savings.
Reduced maintenance cost of a Thermal oxidizer that was constructed in 2001 this T.O. had a numerous problems with 60% on line factor. improvements made by establishing a preventive and predictive maintenance programs on equipment and instrumentation including modifications to pilot gas system, improve reliability of flame scanners, circulation pumps and the blowers variable speed drive annual cost savings 125T$
- Established Mechanical integrity program for PSM covered equipments including piping, 5,600 instruments including interlocks and 2000 stationary and rotating equipments.
Replaced a two stage rotary vane vacuum pump with single stage Busch Cobra dry running pump. This eliminated interstage condensation and solid formation which caused the frequent failures and extensive down time annual savings 90T$.
-Worked with a team to reduce capital employed including fixed assets, spare parts and inventory from 6.5$MM to 2.5$MM.
Reduced the maintenance repair cost of a Western States centrifuge through technical changes, feed speed, vibration and gyration switches, increase micron size of cloth to enable the mother liquor to de-water faster and form a uniform cake, improve the upper bearing support design and lubrication. Annual savings 80$T.

(1987- 1999) Degussa Corp. Theodore, AL
Mechanical Equipment Engineer:

Prepare specifications for plant equipment for domestic and European manufacturers. Write plant equipment standards to promote interchangeability and reduce cost. Prepare and manage capital investment projects. Performed all calculations for rotating and stationary equipment. Provided engineering expertise on maintenance issues, design changes, equipment reliability and mechanical integrity.

(1981 to 1987) Texaco chemical, Port Arthur, Texas

(1986 to 1987) Senior Project Engineer:
Prepared and completed various capital projects. Negotiated and administered project lump sum contracts. Supervised and coordinated instrument and mechanical project team during modernization project. Correlated procurement and construction phases. Maintained control over cost budgets and schedules to complete on schedule and within budget.

(1984 to 1985) Project Engineer:
Developed capital investment projects from conceptual design through appropriation of funds, detail engineering, and field construction.

(1983 to 1985) Area Engineer:
Worked with operations and maintenance of Petrochemical units and recommended changes to existing equipment in order to reduce cost and increase production. Worked with design and
Process engineering in making studies for changes and additions that conform to regulatory, industry, and company standards.

(1981 to 1983) Engineer: Trouble shoots mechanical equipment, and recommended preventive maintenance measures. Prepared capital investment projects.

EDUCATION:
University Of Houston, 1981 B.S. in Mechanical Engineering.
Misc.: Professional Engineer, State of Texas License #63099.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 7041)

Go to Search Parameters...

Brief Description

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

Chemical Laboratory Analyst / Chemical Process Technician.

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

Versed in blasting and painting for the past 20 years

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth

Corrosion control, cathodic protection

Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Operations Manager/Field Engineer - Borehole Seismic

Experience in project management, design, front end engineering, installation, testing and commissioning.

I am an energetic, hardworking candidate. I am seeking an entry level opportunity.

Having, 21 years in Instrumentation Field, Maintenance, Project and Execution includes Oil and Gas and Power Plant Experience with Gulf Experience more than 7 years. Having good exposure to PLC and DCS, with Leading Role responsibility

Obtain a position with a company that is a leader in the Drilling and Completion Fluid Markets of the Oil and Gas Industry. I offer my experience in product conception, presentations, extensive research and development skills

I'm a post graduate in M.Sc., engineering Phy & Instrumentation and having total 16 1/2 years hands-on experience on Control & Instrumentation systems (Maintenance and Projects ) being used mainly in Power plants /Steel /Pulp & Paper and Cement .

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out