Resume - Broad experience in mid-stream and upstream oil and gas production and facilitie...

Misco Jobs

Resume #10937

CONTACT INFORMATION:
View contact information...

SUMMARY
Successful professional with broad-based experience in petroleum production, and facility design and operation. Extensive knowledge of environmental regulations and all field operations: production, separation, treating, compression, and transportation of petroleum fluids. Proven ability to evaluate and solve problems both independently and as a team leader.

EXPERIENCE
Independent Consultant, Houston, Texas 2000 - Present
Senior Principal Engineer; Gulf Interstate Engineering
* Provided Mechanical Design support to Chevron Nigeria/Mid-Africa Business Unit for the Okan GGCP Debottlenecking Project.
* Objective to increase volume by 70 MMSCFD by adding an Air-Fin Cooler, Structured Packing in the Main Glycol Contactor.
* Prepared preliminary PFDs and P&IDs for the process upgrades. Used PipePhase 8 to check for pressure drop restrictions.
* Reviewed final drafts of PFDs and P&IDs for recommended process option.
* Contacted Vendors to obtain budgetary cost and delivery schedule for equipment, piping, valves, fittings.
* Prepared RFQs for the Air Cooler, piping, fittings, and valves.
* Reviewed and made recommendation as to winning bid for supplier of Structured Packing.

Production Engineer; TEMA Oil and Gas
* Provided technical support to TEMA Oil and Gas for Gulf Coast District, supervising two field superintendents.
* Reviewed oil and gas well operations, well logs, and geological data to prepare and implement AFEs for workovers, designed gas lift and rod pump applications to assist fluid flow.
* Designed and installed separation and compressor facilities.

Mechanical Design Specialist; W.H.Linder and Associates
* Prepared PFDs and P&IDs for process and utility systems related to the design of an FPSO vessel.
* Evaluated technical capability of vendors related to supplying heat exchangers, filter vessels, and forced air draft coolers. Recommendations compiled and presented using Excel spreadsheets.
* Evaluated space requirements for process equipment to meet weight and space restrictions on FPSO vessel.
* Developed for Shell Gas Transmission As-built P&IDs, PFDs, Safety Flow Diagrams and General Arrangement Drawings for SS 332 and ST 292 platforms in the Gulf of Mexico.

Process Engineer; Coral Energy/InterGen North America
* Provided technical support to gas treatment facilities, pipeline operations for the Gulf Coast and West Texas regions. Used TSWEET and HYSIS simulation programs to provide solutions to operational bottlenecks
* Acted as project manager and lead engineer to trouble-shoot, design, and install process and/or treating units to meet H2S and CO2 contractual specifications.

Dresser-Rand Compression Services, Houston, Texas 1999 - 2000
Senior Applications Engineer
* Designed compressor packages and budgetary evaluations for gathering systems, main transmission lines and co-generation facilities using DR-Size and Equipment Cost computer programs.

Maverick Engineering, Inc., Victoria, Texas 1997 - 1999
Staff Project Engineer
* Project manager and lead engineer to evaluate, design, and install gas production plants and compression facilities. Responsible for client interaction, preparation of bid packages, and project scope of work.

Oklahoma Department of Environmental Quality, Tulsa, Oklahoma 1993 - 1997
Environmental Engineer
* Evaluated applications and set emission limits for plant construction and operation permits. Reviewed emission inventories to verify permit compliance. Communicated relevant information to the general public regarding environmental issues.

Davy McKee, Tulsa, Oklahoma 1990 - 1991
Senior Process Engineer
* Directed the sizing of process equipment and flowlines, preparation of PFDs, P&IDs, and instrumentation cause and effects, facility operation manuals. Utilized process simulation software to optimize process systems.

Helmerich & Payne, Inc., Tulsa, Oklahoma 1984 - 1990
Staff Operations Engineer
* Provided all technical support to district and corporate staffs regarding the daily operation and function of 750 leases and all equipment including: gas plants, pump stations, compressor stations, and gathering systems covering the Kansas, Oklahoma, and Texas regions.

Petroleum Technology, Rogers State College, Claremore, Oklahoma 1983 - 1988
Adjunct Professor
Evening classes in Production Operations and Natural Gas Engineering

Crest Engineering, Inc., Tulsa, Oklahoma 1978 - 1983
Senior Petroleum Engineer
* Project Manager, Process Engineer directed design, procurement, cost control and scheduling of oil and gas field production equipment for both onshore and offshore operations.

Sun Oil Company, Texas, Louisiana, Oklahoma 1969 - 1978
Petroleum/Gas Engineer
* Responsible for daily production operations oil and gas wells. Evaluated gas well production for potential gas processing, treatment and compression facilities.

EDUCATION
M.S. Environmental Engineering, Oklahoma State University
B.S. Chemical and Petroleum Engineering, Mississippi State University

PROFESSIONAL LICENSE
Engineer-in-Training, Mississippi

COMPUTER
Windows, MS Office including Excel and Word Perfect, PipePhase 8, TSWEET, HYSIS PROCESS, D-RSize, OGRE Economics

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 6558)

Go to Search Parameters...

Brief Description

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Extensive use of Landmark’s Drilling & Completions Engineering Software. Well-verse with data management applications like OpenWells, DIMS and Data Analyzer. Knowledge of engineering applications like WellPlan, Compass, StressCheck, CasingSeat & Insite and Insite Anywhere. Job scope includes design

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Mechanical Engineer in the Department for Research and Development of Oilfield Equipment

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Dimensions of my career profile extend to in depth knowledge of electrical design and detailed engineering activities for the project related to chemicals, petrochemicals, oil and gas plants. Qualification: Bachelor Degree in Electrical Engineering, Exp: 5+ years,

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out