Resume - Discipline – Project Engineer/QHSE Summary Having worked in the Oil and Ga...

Misco Jobs

Resume #1228

CONTACT INFORMATION:
View contact information...

Qualifications

Caledonian University Master of Science; Energy and Environmental Systems.
Including
§    Environmental Pollution and Control
§    Workplace Environmental Management
§    Economics
§    Environmental Law and Policy
§    Thermal and Electric Power Systems
§    Environmental Management Systems
§    Risk Management

    Bell College    HNC Quality Assurance

    IQA    Institute of Quality Assurance Diploma

IOSH    NEEBOSH Diploma (part) modules in Risk Assessment and Safety Technology

    MIQA    Member Institute of Quality Assurance

    MSUT    Member of the Society for Underwater Technology

Discipline – Project Engineer/QHSE

Summary

Having worked in the Oil and Gas industry for over 25 years both onshore and Offshore from Design through the build, pre-commissioning, mechanical completion to first oil and gas. I have been involved in Project Engineering, Project Verification, Engineering support, and HSE contributing to all aspects of these disciplines, from writing and specifying Project Engineering requirements, CTR’s and Integrated Management Systems to implementing the systems for compliance and verification. I have extensive experience in Construction, Material call off, Planning, Onshore / Offshore Interface, Handover and Close out of projects for Fixed Installations and FPSO’s. My present position is that of QHSE Manager – FPSO’s and Deepwater Pipelines.

I have additional experience in critical assessment, risk study and HAZID and HAZOP routines.

I am computer literate working with a variety of databases, including MS Access, Excel, Lotus 123 and other programmes. In addition to this I have experience of statistical quality packages such as Quality Analyst from North West Quality Analysis, risk management packages such as Fig Tree and Sima Pro for life cycle analysis and inventory.

2000 to Present    Intec Engineering Inc – Houston

Position: -    Senior QHSE Engineer

Floating Storage Offshore – Deepwater GoM

Conceptual Engineering - Deepwater FSO in the Gulf of Mexico for the Mardi Gras Marine Transport Option:

Responsible for QHSE on the project and this assignment included:

•    HAZOP and HAZID
•    Environmental Impact Assessment
•    Compliance Standards
•    HSE Planning
•    ESD Philosophies
•    F&G Detection philosophies
•    Active and Passive Fire Protection Philosophies
•    Criteria for Project QRA
•    Project QA

Transferred to the Mardi Gras Transport deepwater pipeline (4500 to 6500 feet). My responsibility is QHSE and the duties include:

•    HAZOP and HAZID
•    Environmental Risk Assessment
•    Environmental Reviews
•    Environmental Reporting
•    Waste Management Procedures
•    Discharge and Emission Mitigation
•    Hazard Register Compilation and Maintenance
•    Regulatory Issues [Environmental]
•    Compliance and Permitting
•    QA project issues

1999 to 2000    Lloyd’s Register Integrity

Position: -    Senior Project Engineer (Asset Integrity) FPSO & Drilling Group

Responsible for the Risk Based Assessments and management of maintenance of inspection strategies, the implementation and execution of monitoring work scopes with regard to process facilities, risers, structures and sub surface structures. To provide support to the Integrity Team Leader, where required, with respect to planning, budgeting and reporting. To provide technical support to the Asset Engineer, operations and maintenance teams, Asset integrity team, corrosion engineers and the Asset Integrity Team Engineering assistants.

    My Primary Duties included:

•    Focal point for the Installation Inspection Engineers
•    Maintain the Structural Integrity Inspection Strategies
•    Prepare and produce mechanical and structural work scopes
•    Manage the execution, reporting and closeout of the work scopes
•    Control and closeout of engineering support with respect to anomaly assessments
•    Consult with the corrosion engineer and the Asset corrosion database with respect to preparing and producing vessel, pipework and structural inspection work packs
•    Manage the implementation, execution and closeout of vessel, pipework and structural inspection work packs
•    Prepare work packs for annual Riser Survey work scopes, manage, implement and issue summary closeout reports
•    Provide support to the Asset Integrity Team Corrosion Engineer with respect to in service failure investigations
•    Responsible for anomaly tracking with respect to progress and closeout corrective actions
•    Monitor areas of expenditure under my control against agreed CTR’s
•    Advise and assist the Project Manager with respect to activities impacting on Technical Integrity
•    Overview planning and budgeting
•    Assist in the updating the Asset Corrosion Management Strategy
•    Assist in developing and implementing measures to identify and mitigate fatigue failure on the Asset

1997 to Jan 1999    Aker Oil and Gas Technology – Banff FPSO

Position: -     Senior QA Engineer- Engineering Support (Design, Build and Commissioning)

As a member of a small client Project Engineering Group, tasked with the expedition of engineering deliverables, the objective of the group was to interface the engineering deliverables, ensuring targets are met for pre commissioning and commissioning priorities, reducing the lead time for the Handover. Ensuring verification and subsea legislative requirements were fully complied with, close out of the Project being successfully achieved, and carry over work was identified, job cards and work packs were put into place.

My achievements within the group have included the authoring of procedures for the Project Handover, Project As Building and the implementation of them. The achieved aims of the procedures have been to ensure that extraneous deliverables were not produced, the As Built phase of the Banff FPSO to the Duty Holder enabling the operational needs for PMR routines.

    My responsibilities included: -

•    Authoring Project Handover and Close Out Guidelines
•    Authoring Project As Building procedures
•    The co-ordination of discipline engineering
•    Ensuring compliance of As Built documentation
•    Timely availability of Manufacturing Record Books
•    Timely availability of Operational and Installation Manuals
•    Vessel Documentation reviews
•    Documentation compliance for Verification
•    Documentation compliance for Vessel Class
•    Key deliverables compliance in the As Built condition
•    Project Close Out requirements are achieved
•    Follow on engineering activities are fully identified

1994 to 1997    Quality Systems Ltd

Position: -    Quality and Environmental Manager

This position was consultancy work, within the Oil, Gas and Petrochemical Industry and related to the implementation of Integrated Management Systems, QMS, SMS and EMS.

    My responsibilities included: -

•    Consultation with engineering businesses to provide Safety Management Systems, Quality Management Systems and Environmental Management Systems for certification to BS EN ISO 9000 and ISO 14000 series
•    Audit current Safety, Quality and Environmental systems in line with QMS and EMS design for the client
•    Setting up Quality and Environmental Systems databases
•    Write and implement Safety Quality and Environmental procedures
•    Implement Safety Quality and Environmental training and awareness
•    Design and implement Statistical Process Control (SPC) procedures

1990 to 1994    JV APG/SALAMIS

Position: -    Project QA Engineer (Engineering and Maintenance support)

The contract was an MMSC contract with Shell in the Northern Fields. The offshore position called for allocation and formulation of job cards and activities, offshore construction, maintenance inspection and certification for 3 platforms, the North Cormorant, the Tern and the Eider

    My responsibilities: -

•    Monitoring of inspection programmes
•    Function test and commissioning programmes
•    Formulation of engineering programmes and plans for all the engineering and maintenance scopes of work
•    Reviews of all new work packs and job cards
•    Procedure test packs, certification packs and reporting progress for final system handover
•    The compilation of OIM’s, MRB’s and data record books for the asset owners
•    Authoring Project Handover and Close Out Guidelines
•    Authoring Project As Building procedures

1988 to 1990    Crosby Holmes Ltd

Position: -    Vendor Project Engineer QA

The company activities included, mechanical, valve, pressure vessel, pump and pipework installations and modifications for clients on and offshore. Contracts included Ince B and Fiddlers Ferry power stations, the BP Bruce SSIV isolation valves and steelworks projects.

My responsibilities included: -

•    Vendor appraisal
•    Procurement to predefined requirements
•    Monitoring of inspection activities
•    Vendor audits and assessments
•    Formulate quality procedures and plans
•    Monitor receipt inspection activities
•    To ensure the update of document and client specification and liaison with client and certification authority
•    The compilation of document handover certification

1984 to 1988    UIE Scotland Ltd

Position: -    Construction Project Engineer

The areas of responsibility at UIE, was construction scheduling, meeting construction and contractual milestones, planning and interfacing, competency issues, inspection activities, vendor appraisal and material procurement to project requirements.

My duties included: -

•    The writing, the definition and implementation of fabrication and erection procedures and systems to client specifications and requirements
•    Programming controls and inspections throughout stages of fabrication
•    To support the certification department in dealing with discrepancies
•    The departmental responsibilities provided for material traceability, ensuring that test procedures and inspections were correctly carried out
•    Monitoring ultrasonic testing and NDT
•    Final acceptance of radiographs and the verification of welder qualification
•    Certification close out prior to sail away

1981 to 1984    BP Magnus

Position: -    Project Engineer (Engineering support)

•    Review of work packs and job cards
•    Specifying of equipment and material for procurement to project specifications
•    Organizing systems for DCC
•    Planning inspection regimes and arranging mobilizations of personnel
•    Vendor appraisal of competence

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 6635)

Go to Search Parameters...

Brief Description

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

I wish to apply for a position as an Instrumentation or/and Electrical or a Process Technician. I have 22 years experience in the Instrumentation and Electrical field. I complete my T4, I pass my Instr. trade test. I write my wireman’s license and also my Elect trade test.

I am having total 15 years experience in design field, 5 years in manufacturing detail designing in valve industry-fouress, 5 years in hvac & pollution control field- abb/flakt, 5 years in design consultancy firm - chemtex- pds 4+ years exposure.a

Engineer with 25 years experience working with pumps, compressors and gas turbines in offshore, petrochemical, refinery, power generation and water injection projects

DCS Start-Up and Commissioning Field Engineer I&C Field Engineer I&C Technician

Looking for world wide employment as a Drilling Fluids Engineer, Salesman or a stock point management position for expediting chemicals and materials to drilling locations.

Experience of controls system for example: DCS, ESD, F&G, HIPS. OFFSHORE, ONSHORE, FPSO, DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE, HAZOP, SIL, FEED.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

Summary of skills Industrial Electrician Certificate(Canadian Interprovincial Standard ) Electrical Engineering Diploma Fluent in English, Russian, Ukrainian

Discipline – Project Engineer/QHSE Summary Having worked in the Oil and Gas industry for over 25 years both onshore and Offshore from Design through the build, pre-commissioning, mechanical completion to first oil and gas.

Looking for offshore employment

Date of birth 19th Oct 1949,Pakistan

Electrical supervisor for oil and gas industry.

i live in Pakistan now is my age 50 years old I want to work on Qater as a a/c technician.

Oi/Gas Engineer - specialized in Production.

My resume summary containing the interest letter, my contact information, education and information about my background and skills.

A highly motivated technician experienced in a broad range of disciplines. An effective communicator at all levels, adaptable and dedicated with proven record in maintenance, installation, management. An enthusiastic and ambitious achiever promoted by examination and personal recommendation.

Drilling Subsea Engineer with a wealth of experience.

Seeking an opportunity in the petroleum market in which my skills, strong dedication and technical abilities will benefit a progressive energy company.

British gas approved Grade-2 Painting Inspector since 1995 having over 20 years experience in Oil/Gas industry. Worked in Oman/UAE/Qatar as Painting Inspector cum Supervisor for Major construction and Service Contracts involving Major shutdowns.

Maintenance engineer - British national aged 39 years. 24 years spent in various positions in industrial maintenance - on shore/off shore gas plants, metals plants. in UK, S.Arabia, Libya, India, Sweden, S.Africa.

Looking for Cost Control/Project Engineer position in oil industry.

Seeking a position as a Offshore Barge Representative / Client’s Representative where my skills and previous offshore background will be an asset to your company. The attached resume covers my 20 plus years of overseas experience in the construction environment

very familiar with the relationship between gas drilling, gas production and gas end user

I am a Civil / Structural / Underground Services / Architectural, Designer / Detailer, CAD Technician fully conversant with all versions of AutoCad, Microstation and RC Packages including Reoforce

Over twenty years experience in Instrumentation & Control, Petro-chem construction, first as a technician, then supervisor/engineer to superintendent. Computer literate, able to liaise with clients & run a multi-national team.

An instrument/electrical professional with 19 years in the process/plant control industry. Excellent hands-on site and office experience ranging from Instrument Technician through Field Service Engineer to Project Engineer, both in the UK and overseas.

Multiskilled Engineer as Electrician/Electrical Technician/Tour Pusher/Driller

24 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment Specialist, in both Gas Compression and Liquids Sh

QA/QC ¡V Inspector civil and structural

I have been working abroad at the service of oil and gas industry, and I have had a great deal of experiences for the design of the largest DP3 drilling rigs and FPSO’s. My position as a lead representative for a large shipbuilder design team has taught me how to meet each customer's expectations.

6 years oil field services experience & enthusiastic oil safety

15 Years extensive experience in the cathodic industry. „»Handling independently turnkey project in the field of cathodic protection of underground structure.testing and commissioning of cathodic protection system.AC/DC Intereference investigation and mitigation.

GIS / CAD / Ms Office / Computer Skils /

I have been working as a scaffolding professional since 9 years in oil &gas field. I can read drawings and have knowledge of risk assessment, method statements, handing over certificates, F91- scaffold inspection procedures [ scaff-tags and ladder tags], SG 4 fall arrest systems for working at heigh

Senior Field Geophysicist ; involved in planning and acquiring seismic data, infield Data processing / Quality Control.

2003 graduate from U of Manitoba Canada. Worked for Exploration companies in Southern Africa. I work for an exploration consultancy company as a geophysicist. I process airborne Magnetic, radiometric and gravity datasets in search for kimberlites and base metals. Also process wireline logging data

Mechanical Engineering Degree holder. Seven years experience in inspection of pressure vessels, heat exchangers, piping , structruals, WPS, PQR, welding inspection , Knowledge of ASME codes

Completed diploma in electrical engineering and currently working with dubai petroleum as a electrical specialist. working as a 28/28 days rotation in offshore field.looking for a job as a electrical technician in offshore field.

Experience: 4 years in the field of Power plants design and Execution, Qualification: Masters in Structural Dynamics

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out