Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #12902 next resume »»
CONTACT INFORMATION:
View contact information...

EMPLOYMENT:

Name of The Organization Designation AssociationPeriod Nature OfBusiness
Fluor B.V Haarlem, The Netherlands
Design Engineer IV - Instrumentation
From July 2007 ` Till date

Carried out PP Expansion for Saudi Polyolefins Company (SPC) Al-Jubail, Saudi Arabia
07/2007 - 04/2008

Polypropylene capacity expansion from 450 kta to 720 kta, achieve by converting propylene feedstock from ethylene cracker

Responsible for Conveying Packaging Systems and Procurement of Field Instrumentation

Sr. Instrument Engineer
Technip Middle East,Doha, Qatar
05/2005 - 04/2007

Carried out ISSD Brown Field Interface Project with new Well Head Jackets Occidental Petroleum Qatar Ltd, Doha, Intelligent Completion Down Hole Equipment

Lead Engineer for the Projects

Tebodin & Partner LLC
PO Box 716, PC-130
Al Athaibah, Sultanate of Oman Sr. Control & Automation Engineer Sep 02 ~ Present LDSC Consultant to Petroleum Development Oman (PDO)

Technip Engineering Brunei Sdn Bhd Instrument Engineer Dec 01 ~ Aug 02 Brunei Shell Petroleum (BSP)
Kuala Belait, KA-2331
Negara Brunei Darussalam
On/Off shore Projects

Foxboro Malaysia Sdn Bhd
Shah Alam, Malaysia. Senior Project Engineer Aug 00 ~ Nov 01 Process Control System Integrator for Malaysia LNG-TIGA Project

Foxboro Malaysia Sdn Bhd
Petaling Jaya, Malaysia. Senior Project Engineer Nov 96 ~ Dec 98 Main Instrument Vendor (MIV) for Malaysia LNG
Re instrumentation Project Dec 98 ~ July 00
(Malaysia LNG Bhd Plant Site)
Bintulu, Sarawak, Malaysia.

Thai Polyethylene Co., Ltd Technical Consultant -Instrumentation May 95 ~ Oct 96 LLDPE Expansion/HDPE additive EPC Projects
Map Tha Phut Ind. Estate
Rayong-21150, Thailand.

Thai Cellulose Products Ltd Manager-Instrumentation Jun 94 ~ May 95 Sodium Carboxy Methyl Cellulose Plant Project
Rayong-21120, Thailand.

Kothari Petrochemicals Ltd Engineer-Instrumentation Jan 91 ~ Jun 94 Nitro Aromatics Projects and Plants
Karaikal-611002, India.

Harihar Polyfibers Ltd, Asst Engineer-Instrumentation Oct 86 ~ Jan 91 Maintenance in Rayon grade Pulp Unit
Unit of Grasim Industries Ltd
Harihar-581 123,India.

EDUCATION:

EDUCATIONAL QUALIFICATION: B.Sc Applied Sciences
M.Sc Process Instrumentation Engineering

M.Sc Process Instrumentation Engineering: University of Roorke, India.
69.9% 1984~1986.

B.Sc Applied Sciences - Faculty of Engineering: University of Madras, India
68.5% 1980~1984.

PERSONAL:

Date of Birth: 20 MAY 1963

Nationality: INDIAN

Marital Status: Married

OVERVIEW OF WORK EXPERIENCE (Starting from Latest)

INDUSTRY NATURE OF JOB PLACE OF EXECUTION

1. Oil & Gas Local Design Service Consultant to Tebodin & Partner LLC, Muscat
Sutanate of Oman Petroleum Development Oman

2. Oil & Gas Brunei Shell Petroleum On/Offshore Projects Technip Engineering -Brunei
Total Fina Elf's Offshore Project

3. Oil & Gas (LNG) Process Control System Integrator (PCSI) for Foxboro-Malaysia
Malaysia LNG -TIGA Project

Main Instrument Vendor (MIV) for Malaysia LNG Foxboro-Malaysia/Malaysia LNG Plant Site
Re-instrumentation Project

4. Petrochemical LLDPE Expansion Project Thai Polyethylene Co. Limited, Thailand
HDPE additive Project

5. Chemical Sodium Carboxy Methyl Cellulose Project Thai Cellulose Products Co. Limited, Thailand

6. Nitro Aromatics Para & ortho Nitrochloro benzene Project Kothari Petrochemicals Division, India

7. Chemical Rayon grade pulp unit -Maintenance Harihar Polifibers Limited, Unit of Grasim Industries, India

1 OIL & GAS
Place of Execution: Tebodin & Partner LLC, Muscat,Sultanate of Oman
Sep 2002 ~ Present
Local Design Service Consultant to Petroleum Development Oman (PDO)

# Working as Control & Automation Engineer for the Petroleum Development Oman Projects
# 48" LNG Pipeline Supply Capacity Increase (FED) Project
Lead Engineer for the Project: Participated in Design Review, HAZOP Study, IPF Review;
Preparation of Specifications including Leak Detection System update, Requisitions for long lead items
# Sur Light Industrial Area Pressure Reduction Terminal (DD) Project (Fieldbus System)
Lead Engineer for the Project: Participated in Design Review, HAZOP Study, IPF Review;
Preparation of IPF related documents, Specifications, Requisitions and DD drawings including Functional Logic Diagrams, Technical Evaluations for all the instruments including MAC (both Fieldbus & IPS systems)
Selection of MAC vendor
# Main Oil Line (MOL) IPF Review: Deputed to PDO as Lead Engineer for the Project..
Preparation of IPF Information Pack including the list of functions to be reviewed.
IPF secretary for the Review meeting; Preparation of IPF Closeout Report including PFD calculations.
# Installation of BS&W meter in MAF (DD) Project: Lead Engineer for the Project: Participated in Design Review;
Preparation of Specifications, Requisitions and DD drawings, Technical Evaluations for all the instruments.
# Monitoring of Remote Wells Project: Study Report prepared with options for monitoring the wells in Yibal
# Installation of flow meter at EET MAF Project: Lead Engineer for the Project: Participated in Design Review;
Preparation of Specifications, Requisitions and DD drawings, Technical Evaluations for all the instruments.
# Isolation of Barik Cooler Project: Lead Engineer for the Project: Participated in Design Review;
Preparation of demolition drawings, Demolition scope of work.
# Hubara/Sahmah Booster Station Control Schematic Preparation Project: Deputed to PDO for the preparation of control schematic.
# Participated as IPF secretary in IPF Review for the following projects
1.Yibal Depletion Compression Project
2.Sur Light Industrial Area PRT Re-IPF
3.Jawda-Rima GRE Pipeline
4.SR CPP Debottle-necking Booster compressor suction scrubber bypass
5.SR CPP Re-IPF Classification Function 5
6.Hubara/Sahmah Booster Pump Station Upgrade

2 OIL & GAS
Place of Execution: Technip Engineering Brunei, Kuala Belait Negara Brunei Darussalam
Dec 2001 ~ Aug 2002
Brunei Shell Petroleum-On/Offshore Projects/Total Fina Elf-Offshore Projects

@ Worked as Instrument Engineer for the Brunei Shell Petroleum-Offshore Projects
@ Champion-1/4/10 Free flow Modification (Purge Gas) Project
@ Champion-1 Free flow Modification (Degasser Boot Level) Project
@ Seria Gaslift Replacement Network –NGCP/E-36/TG-27,TG-30,TG-31 Project
@ Seria Gaslift Replacement Network CI Skid–NGCP/TG-27/TG-31/SEPP01 Project
@ AMPA 6 CPRA by using CD-2000/S-57 System Project
@ East HP Gas Expansion Pipeline Project for Hyundai Heavy Industries/BLNG
@ CI Skid and Facilities for Eastern Field (Champion-1/4/7/10/11/12/14/20/25/26/39 and Magpie
@ Champion-7 Firewater System Replacement Project
@ H-14 Well conversion to Beam Pump Lift Project
@ Install Pump O/L for P-6101 to V-4202 for BLNG Project

2 OIL & GAS (Continued)
Place of Execution: Technip Engineering Brunei, Kuala Belait Negara Brunei Darussalam
Dec 2001 ~ Aug 2002
Brunei Shell Petroleum-On/Offshore Projects/Total Fina Elf-Offshore Projects

@ Worked as Instrument Engineer for the Total Fina Elf-Offshore Projects
@ Installation of new well tie-in for MLJ-105/MLJ-106 (Including Procurement)

@ Job activities:
@ Preparation of Material Requisition for all Instrument Items
@ Preparation of Cause and Effect Matrix/ PEFS review and update
@ Hazop Study
@ Review SIDR/TR Comments and update
@ Review of IFC/IFA Package
@ Implement Comments in IFC/IFA Package and submit as AFDD
@ Update as AFC Package
@ Site-visit

3 OIL & GAS (LNG)
Place of Execution: Foxboro Malaysia, Shah Alam
Aug 2000 ~ Nov 2001
Malaysia LNG-TIGA Plant Project - Engineering

$ Worked as Process Control System Integrator with Foxboro DCS Team for MLNG-TIGA Project.
$ Design, Engineering, Procurement and Commissioning of Time Synchronization for DCS System and all the Sub systems by using GPS (Global Positioning Satellite System)
$ Preparation of the Serial Communication Link (MODBUS Link) with Foxboro DCS and all the various subsystems
Such as IPS &FGS (Triconex), IMCS (ABB),ENMC (ABB), Vibration Monitoring System (Bently Nevada),
RDAS System (Vibrometer), Compressor Control System (CCC), Co2 System (Minimax), Loading arm PLC
(Triconex), GMS and Liquid Metering System and testing the mapping table done.
$ Preparation of Process Control System Integration (PCSI) Plan Procedure, Factory Acceptance Test (FAT) Procedure, System Integration Test (SIT) Procedure and Site Acceptance Procedure (SAT) done.
$ Preparation work done for Factory Acceptance Test (FAT) and System Integration Test (SIT)

Place of Execution: Foxboro Malaysia, Petaling Jaya
Nov 1996 ~ Dec1998
Malaysia LNG plant site, Bintulu, Sarawak, East Malaysia

Dec 1998 ~ July 2000
Malaysia LNG Re-Instrumentation Project - Engineering

$ Prepared DCS and PLC I/O Lists for Module 1/2/3 and Common facilities Units of LNG Plant by using MS Access Software and designing of Safeguarding and fire fighting PLC systems.
$ Converted the existing Logic diagrams of Module and Common Facilities Process and Utilities Units into the format of SIPM's (Shell) Functional Logic Diagrams for Process safeguarding (SGS) & fire fighting / Gas detector PLC Safe Guarding Fire fighting Systems (SFS).
$ Co-ordination with HIMA, Germany (HIMA Paul Hilde brandt GmbH, Germany) for the Design of Safeguarding and fire fighting PLC Systems by using the guidelines from Shell's Design Engineering Practice (DEP)
$ Participated in Factory Acceptance Test (FAT) for SGS and SFS PLC Systems conducted in HIMA works at Bruhl, Germany.
$ Testing of all the system cabinets/ Logic functionality along with Sequence of events (SER) station.
$ Conducted Factory Acceptance Test (FAT) for Foxboro I/A System Version 4.2.3 for Module 3 Process and Utilities systems.
$ Conducted System Integration test and Functional test between Foxboro I/A System and Safe guarding system PLC / Machine Monitoring System (RDAS) /Compressor Control System (CCC)

Malaysia LNG Plant Site - Commissioning

$ Lead Engineer for commissioning of process control loops for the process units in DCS, SGS/SFS PLC, Machine Monitoring System (RDAS-Vibro-meter, Switzerland), Analyzer House and Compressor Control loops.
$ Involved in coordination of Foxboro DCS System vendor and PLC Safeguarding vendor for the Hot-cut over of commissioning of loops in Re-instrumentation Project.
$ Commissioning of Machine Monitoring System (RDAS) loops with X-Windows display in DCS system through Ethernet connection.
$ Commissioning of CCC loops with Train-view display in DCS through Ethernet connection.
$ Prepared final stage engineering documents for commissioning Gas detectors and Fire fighting loops for commissioning in HIMA PLC system and Foxboro I/A Series DCS system.
$ Commissioning of Fire fighting Loops including Plant Siren control in SFS PLC Systems.

4 PETROCHEMICAL PLANTS
Place of Execution: Thai Polyethylene Co. Limited,Map Tha Phut, Thailand
May 1995~Oct1996
Linear Low Density Polyethylene-LLDPE Expansion Project

* Coordinated with UBE Industries, Japan for Detailed Engineering and Procurement for LLDPE Expansion Project.
* Construction supervision of all field instrument Installation including Mass Flow Meters and
Radio active level transmitters.
* Coordinated with Foxboro Thailand for the loop configuration, Sequence programs in
(distributed control system) Foxboro I/A series DCS version 3.3 for the entire Expansion.
* Involved in the activities of Pre-commissioning and Commissioning of all control loops with DCS System.

Place of Execution: Thai Polyethylene Co. Limited,Map Tha Phut, Thailand
May 1995~Oct1996
Additive Project for HDPE

* Coordinated with Foster Wheeler International Corporation, Thailand for Engineering,
Construction and Commissioning of this EPC project.
* Coordinated with Foxboro Thailand for the loop configuration Control system by Foxboro I/A series DCS
version 4.1.
* Construction supervision of all field instrument Installation including supervision of Transmitters
Control valves calibration, Cable tray installation and Cable laying & termination etc.
* Coordinated with Foxboro Thailand for the loop configuration in (Distributed Control System)
Foxboro I/A series DCS version 3.3.
* Involved in the activities of Pre-commissioning of all control loops from field instruments to control room
CS system.
* Involved in the activities of commissioning of all control loops from field instruments to control room
DCS system.

5 CHEMICAL
Place of Execution: Thai Cellulose Products Co. Ltd, Rayong, Thailand
Jun1994~May1995
Sodium carboxy methyl cellulose Project

£ Coordinated with Josef Meissner, Germany for Commissioning of the plant.
£ Installation and Commissioning of the Allen Bradley's PL 5/20 PLC System along with all other field instruments.
£ Installation and Commissioning of Package Boiler Control Systems.
£ Involved in Modification of the plant including Ladder Logic Programs in Allen Bradley PLC system.
£ Well versioned with logic and Ladder Logic Programs.
£ Responsible for Maintenance of Instrument and Control system of the plant including Preventive Maintenance System.

6 NITRO AROMATICS
Place of Execution: Kothari Petro chemicals Division, Head Office at Madras, India
Jan 1991 ~ Sep 1991)

Para and Ortho Nitro chloro benzene (PNCB & ONCB) Projects.
@ Coordination with Krebscosmo-Germany for Mono Chloro Benzene Manufacturing unit, Biazzi-Switzerland for Nitro Chloro Benzene Manufacturing and Distillation Units and BEFS, France for Crystallizer Process Unit for Basic Engineering.
@ Prepared the Operational Group Graphics for all units for DCS Graphics Configuration by using PFS and PID Diagrams.
@ Involved in Engineering stage for the selection of Transmitters, Control Valves, Magnetic Flow Meters, Special Control Valves, TSO Valves, Orifice Flow Calculation Verification including selection of Material Of Construction.
@ Involved in DCS Graphics development, Verification of I/O Configuration, Verification of Sequence Programming for the Crystallizer Batch Process Sequence.

Para and Ortho Nitro chloro benzene (PNCB & ONCB) Plant Site

Place of Execution: Kothari Petro chemicals Division, Plant Site at Karaikal, India
Oct 1991 ~ Jun 1994)

Para and Ortho Nitro Chloro Benzene (PNCB & ONCB) Projects.

@ Supervision of Installation, Pre-commissioning and Commissioning of field Instruments including Transmitters, Control Valves, Magnetic Flow Meters, Special Control Valves, TSO Valves, Orifice Flow meters etc.
@ Supervision of Installation and commissioning of the Taylor/ABB MOD 300 DCS system for operation and control system of the plants.
@ Involved in Modification of DCS Configuration, field instrument Modifications and Sequence Program Modifications.
@ Very well versioned with Plant Interlocking Systems configured in ABB Mod 300 DCS Systems.
@ Responsible for Maintenance of Plant Instrument and Control System including Package Boiler Control System, De-mineralized Water Plant Instruments and Effluent Plant Control.
@ Coordination with Humphreys and Glasgow, India for detailed engineering, Procurement and Construction of the above mentioned projects including water treatment plant, De-Min Water plant, Medium pressure package boilers etc.
@ Involved in Modification of Batch Sequence Program for the Crystallizer Process including
Field instrument selection and modification.
@ Report Preparation of Process data in ABB MOD 300 DCS System.
@ Maintaining Preventive Maintenance Documents and Prepared the Document sheets for Obtaining ISO 9000.

Para and Ortho Di chloro benzene (PDCB & ODCB) Plant Site

Place of Execution: Kothari Petro chemicals Division, Plant Site at Karaikal,
India Oct 1991 ~ Jun 1994)

Para and Ortho Di Chloro Benzene (PDCB & ODCB) Projects.

@ Co-ordination with IDEA, India for detailed engineering, Procurement and construction & commissioning of projects
@ Additional loop configuration, graphic display buildings, batch sequential programming in existing MOD 300 DCS.
@ Supervision of Installation and commissioning of field instruments, hook-up with existing ABB MOD 300 DCS.
@ Responsible for Maintenance of Instruments and Control systems including Preventive Maintenance.

7 CHEMICAL
Place of Execution: Harihar Polifibers Limited an Unit of GRASIM INDUSTRIES LIMITED, Kumarapatnam, India
Oct 1986 ~ Jan 1991

Rayon Grade Pulp Unit

# Maintenance of control systems for Rayon grade Pulp mill, Recovery unit, 7.2 MW Turbine and High Pressure Recovery Boilers.
# Involved in Oxygen bleaching Project control systems including selection of transmitters, control devices.
# Supervision of Installation of all field and control loop instruments for the oxygen bleaching unit.
# Execution of Revamping all Control room Pneumatic and Electronic instruments in Recovery unit, Pulp mill and Recovery Boilers.
# Involved in design, engineering. Procurement of Pulp Digester PLC System.
# Planning, procurement and manpower control for the Annual Shut down period including
Modifications.

ADDITIONAL INFORMATION:

& Completed the Shell's IPF Study Course (M269) conducted by PDO and participating as IPF Secretary for T & P Projects.
& A Very Good working knowledge of Software Packages like MS Excel, MS Word, MS Access & Micro station 95.
& Working knowledge of INtools Instrumentation Software.

Interest: Cricket, Hockey and Music.
Reference: Available on Request.

SALARY DETAIL:

Present Salary: USD 3000 per month
Expected Salary: Negotiable

View contact information...
«« previous resume next resume »»
Search Results (Resumes 501 to 550 of 7050)Go to Search Parameters...
Brief Description
24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:
Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.
7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .
I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.
PDS Frameworks, Autocad, Microstation
Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer
Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding
28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.
Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.
Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures
20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.
Management and supervisory skills
I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.
Departmental development and management of process, staff and workflow integration into corporate operations.
Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.
Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control
I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.
Petroleum Engineer
DSV with over 20 years experience.
I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.
Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time
I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.
12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla
Maintenance & Mechanical Commissioning Supervisor
Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.
QA/QC Manager Welding Engineer Offshore and Onshore
Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning
Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.
Design skills in steel and concrete of petro chem and power plants.
Production Engineer resume
Coatings & Corrosion Engineer "NACE"
I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro
Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects
Upstream and mid-stream experience(27 years) plus underground waste water injection
Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.
I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.
I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.
Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.
Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.
Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.
Project Engineer with Australian education, canadian experience and with very good project management skills.
Pipeline, Facilities and Project Engineer.
More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations
Good working experience on Instrument and control system
Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National
8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,
QA/QC Enginner
Reliability, Maintenance, Planning and Material Engineer- Mechanical
More than 15+ years experience in process operation
Telecom field technicians Customer end
First   1   2   3   4   5   6   7   8   9   10   [ 11 ]   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com