Resume - Diverse experience as a petroleum, mechanical and environmental engineer. Areas...

Misco Jobs

Resume #13184

CONTACT INFORMATION:
View contact information...

BACKGROUND SUMMARY:
More than 13 years of diversified experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management. Proven ability to conceptualize, design, plan and manage people and projects to achieve goals efficiently. Proven team work and communication skills. Self-motivated, dedicated and skilled in working with limited resources to solve difficult problems.

PROFESSIONAL ACHIEVEMENTS:
-Responsible for compliance of all MMS regulations for over 10 offshore platforms in the Gulf of Mexico.

-Conceived, engineered and project managed the installation of an offshore rental compressor for gas lift purposes. Compressor installation, which brought on line shut in oil wells, increased field production by 1500 BOPD.

-Assist with fracture design and supervise fracture completion for a tight Mississippi well sandstone, which increased production from 700 MCF per day to 4200 MCF per day. A 500% increase in production.

-Designed completion procedures and managed actual completion of offshore high pressure zinc bromide frac pack completion (15 MMCF per day completion) and onshore high pressure severe environment wells (inconel and 22% chrome).

-Managed all completion and workover activity for onshore and inland water for Texaco. Resulted in over 85 completion and workover procedures written and performed in one year.

-Designed, engineered and managed several large-scale environmental and production facility projects. Projects required capital expenditures in excess of $1 million each. Required project engineering, project managing and project scheduling skills. Duties included: design of a water treatment system for an oil recycling facility; design, layout, and install salt water disposal systems; design and layout of production facilities and installation of a large scale compressor (> 1000 hp).

-Won Innovation award from Texaco for participating on a three-member team that drilled the first successful onshore horizontal well for Texaco in Louisiana.

-Reduced lifting cost at Bay de Chene field in one year from $10/BOE to $2.50/BOE. A 75% reduction. Reduction came from production increases and expense reductions.

-Increased gas production from 300 MCF/D to 10500 MCF/D in six months at the Bay de Chene field through an extensive workover program. A 3500% increase in production.

-Increased oil production from 200 BOPD to over 2000 BOPD in one year at the Bay de Chene field as part of an extensive drilling and workover program. A 1000% increase in production.

-Attained MMS certification as a Well Control Supervisor for Surface and Subsea BOP Stacks for Drilling, Well-Completions and Workovers.

PUBLICATIONS:
Co-authored SPE paper on "Best Completion Practices", SPE paper #52810.

EXPERIENCE:
Petroreal of America, Inc., New Orleans, LA (2/04) – Present
Vice President, US Operations
Vice president of US operations for a start up independent oil and gas company. Manage all phases of operations, production and engineering for all properties. Properties are offshore, onshore and inland water. Responsible for all operation and engineering issues for potential financiers. Responsible for economic evaluation, ranking and selection of field acquisitions and exploration opportunities. Manage company's interest in all engineering and operation matters, including but not limited to, rig completions, remedial workovers, facility projects and field production.

John C. Weldy Jr, Slidell, LA (1/03) – (1/04)
Self Employed Consultant
Consultant for various companies. Prepared remedial workover procedures for oil and gas wells, which included completion strategy and cost estimating. Performed economic evaluation and reserve estimation for exploration opportunities. Evaluate and review expense records, facility operations, artificial lift operations and workover potential for existing fields.

Century Exploration, Inc., Metairie, LA (5/01) – (12/02)
Production Manager
Production manager of offshore and onshore production for independent oil and gas company. Managed over 40 contract personal offshore and onshore (including 10 offshore platforms). Production was diverse and varied from sandstone in onshore and offshore Louisiana, tight rock in Mississippi and sour gas in Alabama and Texas. Designed and supervised hydraulic fracture jobs for tight rock onshore wells. Wrote completion procedures and managed deep high pressure severe service completions (greater than 8% H2S, 5% CO2 and 16# mud using inconel and 22% chrome). Wrote completion procedures and managed offshore high pressure frac pack completions using zinc bromide. Conceived, engineered and project managed various large scale offshore facility projects (platform modifications, compressor installations and pipeline installations). Designed, layout, engineered and project managed complete onshore facility installations for sour gas service (including H2S monitoring and safety equipment). Performed nodal analysis on various production wells using nodal analysis software. Designed and installed gas lift for offshore wells. Prepared and supervised various remedial operations on existing oil and gas wells (WLPB's, acid stimulation, logging, coil tubing, cementing, bottom hole pressure transient analysis, etc...). Responsible for all facets of MMS regulatory compliance (monthly and yearly audits, facility modifications, NTL compliance, etc...).

Watson Energy, LLC. Mandeville, LA (8/00) — (5/01)
Senior Petroleum Engineer
Senior petroleum engineer for independent oil and gas exploration company. Economic evaluation, reserve estimation and recommendations for acquisition properties and exploration opportunities (offshore and onshore). Manage all rig completions and remedial workover procedures for oil and gas wells. Includes written procedures, completion strategy, cost estimating and securing of equipment and services. Design, layout, and manage the construction of production facilities. Generate, submit and supervise workover and drilling opportunities.

Operational Services, Inc., Lafayette, LA.

Operations Engineer (4/00) – (8/00)
Operations engineer for independent oil and gas exploration company. Manage workover operations, facility operations, gas lift operations, and wellsite supervision (rig workovers, coil tubing, perforating, logging and tubing runs) for numerous oil and gas inland water fields.

Loyola Law School, New Orleans, LA. (6/99) – (12/99)

Attend law school. Maintained a B average in school. Ceased attendance in between semesters under good terms with school.

Texaco, Inc., New Orleans, LA. (1/91) — (2/99)

Completions Engineer. 1998 — 1999
Managed rig completion and remedial workover procedures for oil and gas wells. Detailed job planning resulting in written procedures. Determined completion strategy, scheduling and accurate cost estimating for all phases of workover activities. Specified and bid various equipment and services.

Facility Project Engineer. 1996 — 1998
Design, layout, and manage the construction of various large scale environmental and production projects. Wrote specifications, prepared bids, prepared cost estimates, and awarded contracts. Wrote Basic and Visual Basic programs for assistance in sizing oil and gas production equipment.

Production/Reservoir Engineer. 1991 — 1996
Generated workover, development and exploration drilling opportunities. Performed economic analyses, completion design, and reserve calculations. Prepared, submitted, and supervised remedial operations on existing oil and gas wells (WLPB's, acid stimulation, logging, coil tubing, cementing and bottom hole pressure surveys). Assisted with successful 3-D partner promotion of a Texaco gas field.

SKILLS:
Knowledge of the following engineering codes: ANSI B16.5, B31.3, B31.4, B31.8, and ASME Pressure Vessel Code Section VIII Division 1.

Proficient at the following software: EPS FloSystem Nodal software, RockWare Petroleum Engineering series, GasWat, OilWat, Gruy, Aries, Dwights/Production Information, Primavera Project Manager, AutoCAD, ProPipe, ProFlow, ProIso, Pipe Phase, Microsoft Office 2002 and XP (Word, Excel, and PowerPoint), Basic and Visual Basic programming.

EDUCATION:
Master of Science Degree in Environmental Engineering.
Tulane University, December 1995. G.P.A. 3.70/4.00.

Bachelor of Science Degree in Mechanical Engineering.
University of Alabama, December 1990. G.P.A. 3.38/4.00.

Bachelor of Science Degree in Petroleum Engineering.
University of Alabama, May 1985. G.P.A. 3.15/4.00.

REFERENCES:
Presented upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7041)

Go to Search Parameters...

Brief Description

Excellent working knowledge in Piping stress analysis using caesar II

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

Offshore Rig Safety & Training Coordinator.

Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

electrician

A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.

AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER

EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS

Safety and Risk Researcher

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out