Resume - Analysis Estimation-Officer 10 years as operations engineer in power plant

Misco Jobs

Resume #13258

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:
To be the part of a team of high-caliber professionals in a progressive, transnational organization, thus sharpening my own professional skills, while at the same time contributing my best to the overall development of the organization.

Post applied for: Analysis Estimation-Officer

Highest academic qualification: Master of Engineering with control systems engineering as the specialization.

No of years of experience: 10years

Languages known: English, Hindi and Telugu

ACADEMIC QUALIFICATIONS:
Degree Year of Completion University /Board Score % Class
Master of Engineering
(Control systems Engg) 1995 Andhra University 71.00 First

Bachelor of Technology
(Electrical& Electronics Engg) 1992 JNT University INDIA 86.00 First

Intermediate 1987 Board of Intermediate Education 81.00 First

S.S.C. 1985 Board of Secondary Education 79.00 First

EMPLOYMENT HISTORY:
Power plant experience:
From April 2002 to till date:
Operations Engineer at SABIYA POWER STATION OF 2400 MW (8 X 300 MW, 8 X 975.6 Tons / hr oil and gas fired boilers, 140 bar and 540 degree centigrade Steam turbine each) capacity which belong to Ministry of Electricity & water, State of Kuwait. Operational activities being carried out from CRT operated related to burner control system, feed water control system, turbine control system and their auxiliaries control through the DCS supplied by MITSUBISHI HEAVY INDUSTRIES LTD, JAPAN. Raising operational defects and informing to planning and maintenance departments, issuing work permits and equipment isolations are being carried out. Attended emergencies scrupulously to safeguard the equipment. Ample exposure to the common auxiliaries such as fuel oil system, steam transformer system, service and make-up water systems and DM plant operation concepts.

From Jan 1996 to April 2002:
Engineer (Electrical) / Operation at VIJAYAWADA THERMAL POWER STATION of 1260 MW (6 X 210 MW, 6 X 690 Tons / hr coal fired boilers, 140 bar and 540 degree centigrade Steam turbine each) and RAYALASEEMA THERMAL POWER PROJECT of 420 MW (2X210 MW, 2 X 690Tons / hr coal fired boilers, 140 bar and 540 degree centigrade Steam turbine each) which belong to Andhra Pradesh Power Generation Corporation, Andhra Pradesh, INDIA. The operational activities being carried out at various panels in control room viz., Furnace Supervisory Safeguard System control panel, Feed water control panel, Turbine control panel, Generator control panel and auxiliaries control through DCS supplied by YOKOGAWA BLUE STAR LTD, JAPAN. Attended various emergencies like grid disturbances, total supply failures (black-outs) etc.,

PETROCHEMICAL EXPERIENCE:
From May 1994 to Dec 1995:
Engineer / electrical in Andhra petrochemicals Ltd, Andhra Pradesh, India. Attended periodical maintenance of 3.3 KV and 415V switchgear, relays and batteries maintenance, lighting maintenance and maintenance of HT < drives and annual shut-down maintenance of 132KV/3.3KV switchyard etc.,

Utilities:
Having adequate operational exposure in the following utilities area:

Instrument air and service air compressors,
Low temperature and medium temperature chillers,
Heating, Ventilation and air conditioning systems,
Chlorination system, Reverse Osmosis plant,
Fuel handling of various fuels like crude oil, heavy fuel oil, gas oil etc., gas receiving station and plant effluent system.

Commissioning activities:
Attended commissioning activities of the 300 MW / 975 T/H of MITSUBISHI boilers & turbines in Kuwait and 210 MW/690 T/H boilers & turbines of BHEL, India during the annual overhaul which includes line-up of circulating water system, cooling water system, condensate system (LP water circuit), feed water system (HP water), fuel oil/gas system, RAH water washing, safety valves testing, refractory curing process, boiler, turbine and plant interlocks checking in co-ordination with the instrumentation staff etc. Participated in the testing and commissioning activities of ash-handling plant of 210 MW units supplied by L&T Limited, India.

Attended 300 MW turbo generators/975 tonne boilers on-line training programs conducted by MITSUBISH HEAVY INDUSTRIES LTD such as 100% load rejection test, single command start-up operation, fuel oil change-over, over speed protection test etc.,

Software skills:
C, C++, Oracle 8.0, Developer 6.0, MS Office 2000, DOS and WINDOWS operating systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 6635)

Go to Search Parameters...

Brief Description

I have nearly 7 years of solid experience in package equipment engineering for oil refineries, petrochemical, chemical, mining ang gas processing plants. It entails basic and detail design engineering such as preparation of requisitions, specifications, proposal evaluation and document review.

I am especially interested in this position because my experience as a Mechanical technical office superintendent in the oil, gas & petrochemical field has prepared me to manage all technical mechanical jobs. I'm looking forward to using this experience for enhancing the success of your company.

I am herman susanto has BGAS Painting Inspector grade 3/2, I was Graduated from sriwijaya University and my Facult is Mechanical Engineering

Attend meetings on site,Research for suitable solutions and estimating costs and timescales,Liaise with others in the design team,Liaise with clients and contractorsPreparing product documentation, writing reports and giving presentations,Supervision and erection of substations, HT/LT Electric.

I am a qualified Instrumentation Diploma Engineer and having 10 years of well experience in instrumentation field of Maintenance, Commissioning, Installation and Shutdown activities in oil and gas well heads, petroleum refinery, petrochemical and power plant industries.

Experienced Mudlogging Geologist

Graduate Engineer with multi discipline skills, hands on and managerial experience in Industrial Services and commendable 12 years of experience in Inspection, NDT, QA/QC, and testing in E & P, Oil & Gas sector in international environment. ASNT L3-API-AWS, CSWIP-NACE

A highly skilled Well Site Geologist over 15+ years experience for shell Oman include 11 years with Baker Hughes Inteq, worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas wells (include the deepest gas well in North Oman 6235 m), some exploration and develo

Experience in Marine construction of port and breakwater.

22 years of diverse experience in the Oil and Gas Industry in support and professional positions

Knowledgeable in Procurement, Materials Management and Piping.

Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas

Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.

6 years exp in piping design engg field

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

6 years experience in Drilling Rigs,shipping &Oil & Gas field as a Piping Designer.

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

Simulation Engineer

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Petroleum Engineer with experience in Chemical Treatment.

I graduated from Technology Industry School in 1988. I worked for PT Arun LNG.Co. for 11 year since Nov.1989 to March 2001. I have been working for Qatar Petroleum as Senior Laboratory Techinician since March 2001 to present.

vender inspection, Inspection of internal & external coating for steel pipes, pipe fabrication (LSAW&HSAW), NDT methods witness(RT,UT,MPT & LPT).

A good worker, I do my best.

I would like to inform you that I (RAVI KUMAR PALLELA, S/o RUDRAYYA) completed my degree in B.E (Production) discipline with 70.3% in First Class with Distinction from Swami Ramanand Theerth Marathwada University, Nanded in the year 1999. I Have More than 6 ½ Years experience in CAD/CAM area.

Highly qualified in 3D modeling and design as well as control and instrumentation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out