Resume - Project Engineer :Responsible for execution of assigned projects from proposal t...

Misco Jobs

Resume #13937

CONTACT INFORMATION:
View contact information...

Education:

1993: Master Degree in Mechanical Engineering.
Name of Thesis: Integral Prediction Method For Turbulent Boundary
Layer Using Entrainment Technique.
Faculty of Engineering,
Zagazig University, Egypt.

1982: B. Sc. in Mechanical Power.
Faculty of Engineering,
Zagazig University, Egypt.

Computer Knowledge:

- Ms Project.
- Operating IBM Computers using different design applications, as well as MS
Office software
- Calculation with mechanical software.
- HVAC Calculation by using Carrier, LG, & AL- Zamil Software.
Classification: Project Engineer

Duties & Responsibilities

- Responsible for execution of assigned projects from proposal to Project Manager completion.
- Responsible for ensuring that the package for submittal to the client meets all client requirements. Checks that all client comments have been incorporated. The PM assures that the package has been through all relevant checks in line with the QA/QC manual.
- Prepares and coordinates the project schedule and maintains this throughout the project. Optimizes the use of personnel to achieve the schedule. Forecasts and addresses deviations to schedule.
- Responsible for the total administration of the project in line with procedures. Attends and minutes all project meetings. Maintains project master files. Handles all project communication with the clients.
- Prepares/compiles Project Co-ordination Procedure (PCP). Assures efficient dissemination of data to the project team and assists the lead discipline engineers with co-ordination. Co-ordinates staffing of the project with the Design Manager.
- Prepares all project reports required, internally and externally, with the assistance of Project Support Services where required.
- Responsible for assuring that all of the Project Team are familiar with the scope of the project.
- Responsible for assuring that all scope changes are maintained on a trend log and are promptly transmitted to the client for resolution.
- Prepares/compiles technical proposal bidding purposes.
- Contacts:
Reporting: To the Engineering & Project Department (EPD)
Manager.
Internal - regularly with EPD Manager, Design Manager, Project Managers and Lead Discipline Engineer
External - with client (SAUDI ARAMCO, SABIC (IBN RUSHD), ROYAL COMMISSION ).
Major Projects:

- Sulfur Recovery Upgrade at Shedgum & Uthmaniyah Gas Plant (SAUDI ARMCO)
- Cogeneration Interface Project UGP, SGP, JGP.(SAUDI ARMCO)
- Ras Tanura Refinery Wasterwater Recovery. (SAUDI ARMCO)
- Treatment Plant Project, Juaumah Gas Plant. (SAUDI ARMCO)
- Modification and upgrade the emergency area in Ras-Tanura medical center. (SAUDI ARMCO)
- Utility upgrade in U.S. consulate.
- IBN RUSHD ( Propane & Butane Feed Pipelines).(SABIC)
- Complete detail design of industrial factories such as: AL-RUSHAID OILFIELD CENTER, SAUDI TRANSFORMER CO., AL-RASHED STEEL FACTORY,AL-RASHED FASTENER FACTORY.

- Design projects (HVAC& Utilities) in the commercial & residential field such as multi story buildings, and malls.

- Construction projects for the Egyptian Petroleum Company.

- Maintenance projects for the Golden Farm (food processing plant) and airports

Experience:

1 May.2003 Up to now: Company Name:
- SOFCON Consulting Engineer Co.
Al-Khobar - Saudi Arabia
Position Held:
Project Engineer
Major Projects:
1- SAUDI ARMCO:
- Sulfur Recovery Upgrade at Shedgum & Uthmaniyah Gas Plant (SAUDI ARMCO)
- Cogeneration Interface Project UGP, SGP, JGP.(SAUDI ARMCO)
- Ras Tanura Refinery Wasterwater Recovery. (SAUDI ARMCO)
- Treatment Plant Project, Juaumah Gas Plant. (SAUDI ARMCO)
- Modification and upgrade the emergency area in Ras-Tanura medical center. (SAUDI ARMCO)
2- IBN RUSHD
- IBN RUSHD ( Propane & Butane Feed Pipelines).(SABIC)

1 Feb. 2001 to 30 April 2003: Company Name:
Nassir Mulhim - Consultants Engineers Al-Khobar - Saudi Arabia
Position Held:
Supervisor Mechanical Engineer
Responsibilities:
- Planning, Designing and scheduling of work activities
(Piping, Utilities & HVAC)
- Coordination With The Client¡¦s
- Piping Design Engineer In Various Aspects Of
Industrial And Commercial Projects
- Design & Supervisor of all Air Conditioning System for
Industrial, Commercial & Residential Projects

Major Projects
A Industrial
- Weatherford AL-Rushaid. (Factory & office)
- Baker Hughes AL-Rushaid. (Factory & office)
- Saudi Transformer Co. (factory & office)
- Fasteners AL-Rashed. (Factory & office)
B Residential Building:
- Saad AL Hussan Compound (Fifty Villa)
- Khalid & Khalefa AL Mulhim (Six Building)
- 3-AL-Mutlaq

1 Aug. 1998 - 1 Jan.2001: Company Name:
- Petroleum Projects & Technical Consultation Co. (Petrojet)
Cairo - Egypt
Position Held:
- Supervisor Mechanical Engineer.
Development of new production lines for Egyptian Petroleum Company, Alexandria.
Responsibilities:
- Piping Installation, including:
- Preparation fabrication drawings.
- Working as field engineer to prepare modification on site as required modify piping route.
- Taking decision for material substitutions at site
- Supervising mechanical completion stage including bunch list of piping system, hydrostatic testing, reinstatement and commissioning of piping system.
- Applying and controlling welding and safety procedures.
- Verifying material description

8 Oct. 1995-25 Jun. 1998: Company Name:
- Consulting & Design Engineering ( C. D. E. )
Al-Khobar - Saudi Arabia
Position Held:
- ENGINEER-1 (Mechanical / Piping)
- Purpose: Analysis And Design Piping Project

Responsibilities:
- Coordination With The Client's Engineers.
- Piping Design Engineer In Various Aspects Of
Industrial Petrochemical And Commercial Projects
Involved in various Saudi Aramco projects:

- Riyadh Oil Refinery Drawing Integration Project.
- Refinery & Upgrade Drainage Sumps, Ras-Tanura. (Phase 1, 2 & 3)
- Modification & Upgrade of Emergency Area in Ras-Tanura Medical Center.
- Appraisal & Engineering Services for Utility Upgrade in U.S. Consulate.

1 Feb. 1994 - 12 Seep 1995: Company Name:
- Petroleum Projects & Technical Consultation Co. (Petrojet)
Cairo - Egypt

Position Held:
- Supervisor Mechanical Engineer.
- Worked in several projects undertaken by Project in Egypt.
- LPG, Alexandria.
Responsibilities:
- Piping Fabrication and Installation, including:
- Preparation fabrication drawings.
- Working as field engineer to prepare modification on site as required modify piping route.
- Taking decision for material substitutions at site
- Supervising mechanical completion stage including bunch list of piping system, hydrostatic testing, reinstatement and commissioning of piping system.
- Applying and controlling welding and safety procedures.
- Verifying material description
12 Jul. 1988 -17 Jan. 1994: Company Name
- The Egyptian General Organization for Civil Aviation.
Position Held:
- Operational Engineer.
Responsibilities:
- Supervising Maintenance & Operations of Airport Equipment (Generators, Pumps, Compressors, Fire protection equipment, etc.)

9 Oct.1984 - 11 Jul.1988: Company Name:
- Golden Farm Co.
Cairo - Egypt
Golden Farm is the largest food processing company in Egypt. Its main activity is production and packaging of dairy products. It is also specialized in packaging of dry products, i.e.. Spices, legumes, etc.
Position Held:
- Maintenance Engineer
Responsibilities:
- Maintenance works for factory equipment: Power plant, Water plant, packing machines, pumps & Air Condition.
- Supervising spare parts manufactured at external workshop.
- Participating in studying company's projects
- Supervising the operation of new production lines
- Supervising maintenance control & preventive maintenance.

Training Courses:

7 May 1994 - 11 May 1994: Corrosion and Painting of Steel
Port Training Center
Arab Maritime Transport Academy
Alexandria - Egypt

1 Jan. 1990 - 12 Jan.1990: Industrial Safety and Health
Cairo Airport Training Center
Cairo - Egypt

26 Nov.1988-22 Feb. 1989: Airport Electro-Mechanics
Civil Aviation Training Institute.
(A joint A.R.E. ICAO Project.),
Cairo - Egypt.

Jan.1987 - May 1987: Maintenance Control and Preventive Maintenance
The Engineering & Industrial Design Development Center.
Ministry of Industry,
Cairo, Egypt.

23 Feb.1986 - 06 Mar.1986: Welding Technology And Application
Engineering & Industrial Design Development Center.
Ministry of Industry.
Cairo - Egypt.
16 Dec. 1984- 22 Dec. 1984: International Seminar: Computers Application in Management
University of Patras, Greece.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 6445)

Go to Search Parameters...

Brief Description

PIPING STRESS ENGINEER WORKED WITH LINDE AG MUNICH AND PRESENTLY WITH WORLEY PARSONS AT SOUTH KOREA

Skills in mechanical equipment maitenance and production operation,B.Eng in mechanical engineering,Diploma in mechanical engineering technology, C&G london diploma in mechanical maintenance & production operation,SITP( Shell Intensive Training Programme)Mechanical workshop comptence certificate

welding inspector + engineering degree+ aws-cwi

H2S Engineer, Administrative work, Certifications

I working in ENI since 1991,I grow up in Reservoir dept., now I’m oriented on Pet/prod. Eng. focussed on optimization,close to daily wells problem.CT,WL drag reducer,salt dispersant,pig activity.I’d like to have other experience in other dynamic environments in order to increase my professionalism

INSTRUMENT & CONTROL ENGINEER

Senior Geophysicist, Petroleum Negotiator

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Fifteen (15) years of experience in Instrumentation works.

A committed and dependable team player with extensive offshore operations/commissioning experience and onshore construction / commissioning experience

Expertise in sizing, correct selection, design base document, specifications/data sheets, material requisition for inquiry/purchase, technical & commercial evaluation & recommendation, design review & approval and witnessing tests of Rotating Equipment (Gas / Steam Turbines, Positive Displacement

Reservoir simulation, welltest (onsite support & interpretation).

Mech. Engineer & MBA with over eight (08) yrs of exp in Project Marketing. Engaged in BD activity for Process Package/ Eqpt required in Offshore/Onshore projects of Oil & Gas Sector with full exposure to Separation Eqpt, Process Heaters, Electrostatic Emulsion Treaters, Glycol Dehydrator, FG Skid.

I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.

Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.

I have total experience almost 4 years in piping stress analysis. I have work in oil & gas project as well as power plants. I can work on piping stress software like caesar II, autopipe and triflex. I have knowledge of European code 13480 and asme 31.1 & 31.3.

Work on DCS, PLC, Fire and Gas, process control instrumentation installation, commissoning and maintenance, Currently working as Senior Instrument Technician in Ras Laffan Industrial City, Qatar.

This letter is to express my interest in the Proposal / Estimation Engineer position. Based on my skills in boiler field for past four years, I am confident that I would be a great addition to your team.

I have 4 years experience in PLC Automation .(3 years in Schneider and 1 year in GEFanuc PLC). PLC logic development , SCADA development ,Field activties and commissioniing of PLC systems.

4 years experiences in Oil & Gas engineering. Workings in safety engineering design include loss prevention (e.g. fire fighting design, firewater hy-draulic calculation, PFP, etc), risk assessment (e.g. HAZOPS and HAZID, FMEA, SIL, consequence analysis)

As chemist in the quality control Lab, The chemicals of toothpaste and shaving cream [(NaOH, KOH, Free fatty acid) concentration, Ph, viscosity and density] in lab and quality control on all the production stages in factory

Detail engineering

Electronics & Mechanical Engineering with QA/QC certification

Diploma of Associate Engineer In Electronics Technology(Supervised two shut-down at PARCO refinery in 2002, 2007 & my scope of work covered, Control valves, Compressor, Steam Turbine & high pressure Pumps instrumentation removal, overhauling, calibration check, reinstallation and start-up sport)

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out