Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #145
next resume »»
CONTACT INFORMATION:
View contact information...
June 01 to date Company; (NMC) Excel energy
Position; Stock analyst
Project; Prairie Island
Location; Red Wing, MN, USA
Reassessing against usage & lead-time, the stocking levels of all the line items in the material inventory, re-ordering where required. Review of the quality assurance levels of equipment & piece parts to ensure compliance with NRC recommendations.
Mar 01 to May 01 Company; (Caliper) Con. Edison
Position; I&C Technician
Project; Hudson Avenue Power Station
Location; Brooklyn, New York, USA
Perform Current, Ratio & Polarity checks on CTs & PTs. List all instruments (field & control room) to define extent of work. Perform calibrations & loop checks on stream generator instrumentation, without the aid of any documentation. Installation of field instruments & components stripped off whilst equipment retired. Carry out fault finding on instrument loops & demolition of parallel loops no longer used or causing spurious signals.
Jan 01 to Mar 01 Company; (Entegee) Excel
Position; Materials dispatcher
Project; Prairie Island outage
Location; Red Wing, MN, USA
Assist warehouseman with accepting & inspection of materials where required during the outage. Assisted with line item level updating.
Jan 00 to Dec 01 Company; (CAPPO) Technip/KTI
Position; Instrument Superintendent
Project; Construction & Commissioning
Location; Saudi Arabia, Poland & China
Overall control of the instrument installation & commissioning of eight ethylene furnaces in Saudi Arabia. Precommissioning furnaces in Poland & an SRU in China. Solely responsible for the instrument progress report & punchlist. Created site reports recommending changes to the engineering/design department in Holland or Milan. Supervision of technicians carrying out extra works. Joint responsibility with the DCS Engineer for carrying out loop checks, pre-commissioning & commissioning activities. The plant is Saudi utilized a Honeywell TDC 3000 DCS.
Aug 99 to Dec 99 Company; Pritchard, Black & Veatch
Position; E&I QA/QC Inspector
Project; Shedgum NGL debottlenecking
Location; Abqaiq, Saudi Arabia
Responsible for the installation of field instruments & LV electrical equipment on a debottlenecking project. Kept all documentation updated & made all as built drawings. Answered technical queries from the sub-contractor (SA Kent) & resolved conflicts between Aramco & ISA standards. Liaised with Aramco QC department to enable the smooth flow of inspections & technical reviews of engineering documentation.
March 99 to July 99 Company; Fisher Rosemount
Position; Instrument QA/QC Supervisor
Project; Obaiyed Field Gas treatment
Location; Matrou, Egypt
Part of the construction team for a gas treatment facility in Egypt near the Libyan border. My duties consisted of inspecting the installation & completing ITR’s of all the field instruments supplied by Fisher Rosemount for the project. This included analyzers & the flare system. Assisted construction with engineering queries & hook up inconsistencies.
June 98 to February 99 Company; (Velosi) Fluor Daniel
Position; Instrument Engineer
Project; Koch refinery
Location; Pine Bend, Minnesota, USA
Part of the Fluor Daniel engineering design team. The upgrade consisted of turnaround work & small to mid-sized environmental projects. My duties were to specify instrumentation using preliminary P&ID’s, create the specification sheets, arrange for quotations, order the material, supervise construction & assist with fault finding during pre-commissioning & start up.
September 97 to June 98 Company; Bechtel (UK)
Position; Instrument Engineer
Project; Ras Tanura Refinery Upgrade
Location; Saudi Arabia
Part of the engineering & design team at site. The upgrade consisted of constructing an additional Hydrocracker, Visbreaker, Hydrogen Plant & associated utility units. There were 5,500 instrument loops & over 35,000 instrument tag numbers. Answered technical queries compiled by the construction contractor (CCC). Ordered additional materials overlooked by the engineering team in London. Designed instrument loops & created MTOs’ to comply with ARAMCO standards. Assisted contractor to fault find when loop checking through vendor equipment.
November 96 to April 97 Company; Chiyoda Corporation
Position; Instrument Supervisor
Project; Bandar Abbas Refinery (NIOC)
Location; Iran
Part of the Project Management Team ensuring that the Instrument Contractor complied with NIOC & API standards. Advised the contractor on how to conform to the construction schedule. Witnessed all aspects of installation of the construction phase, compiled punch lists. Gave assistance to management in discussions with the client & offered alternative solutions to problems or deviations. Coordinated the contractors work with other disciplines working in the same area. Confirmed that progress claimed conformed to work carried out. Provided fault-finding assistance during loop checking through to two Honeywell TDC 3000 DCS & a relay based ESD system.
May 96 to November 96 Company; Foster Wheeler Energy Ltd.
Position; Instrument Supervisor
Project; Aromatics Plant Construction Location; PAC Island, Singapore
Part of the design & engineering team on an aromatics plant in Singapore. Punch listing completed loops before hand over to the client. ‘Chasing’ outstanding work list items for system hand over. Troubleshooting problems of construction. Assisting engineering with technical queries by the contractor. Highlighting material shortages & expediting their delivery. Pre-commissioning of complex control system loops through to a Honeywell TDC 3000 DCS.
April 94 to April 96 Company; (GSS) Toyo Engineering Corp.
Position; Snr. Area Coordinator (E&I)
Project; Refinery Construction (MRPL)
Location; Mangalore, India.
Part of the Project Management Team (PMC) on the construction of a grass roots Oil Refinery in India. Responsibilities included advising and supervising contractors on proper work practices and industrial norms associated with Instrumentation/Electrical Installation. Reviewing design drawings, procedures, specifications and final documentation for two Honeywell TDC 3000’s & seven Satellite Rack Rooms. Carried out construction of a Tokyo Keiso Tank Gauging system.
January 92 to March 94 Company; (Dynarabia) Aramco
Position; Instrument Engineer
Project; GOSP & Gas compression
Location; Tanajib, Saudi Arabia.
Retrofit & commissioning of a mothballed GOSP. Four Honeywell TDC 3000’s installed with ‘smart’ transmitters increased throughput by 30%. Supervised 20 Expatriate & local technicians on the installation of. Assisted with the development & reviewed the ladder logic of a Triconex PLC ESD system. Carried out orifice plate (Oricalc) & control valve (Fisher, version 1.1) sizing calculations using PC. Witnessed loop checks through to SCADA & supplied the contractor the solutions to design or engineering problems.
January 89 to January 92 Company; (Shika Griffin) Brunei Shell
Position; Consultant (Instrumentation)
Project; LNG plant
Location; Brunei.
Part of the expatriate team of supervisors on a LNG plant. Supervised eight technicians & assisted with the maintenance of the utilities instrumentation, pneumatic & analogue electronic field devices. Duties included day to day running of the department, & standby duty outside of normal working hours. Also involved with the construction/pre-commissioning phases of a Foxboro I/A DCS system. Assisted with the creation of a control valve spares catalogue for the plant.
February 88 to December 88 Company; (Creole Plant Services.) ADNOC
Position; Instrument/Electrical Engineer
Project; Data upgrade
Location; Abu Dhabi
Responsible for correcting the database of an ICL Warehouse computer. Correcting part numbers & descriptions of instrument & electrical items.
July 87 to January 88 Company; (M.W. Kellogg) K.N.O.C.
Position; Senior Supervisor (Insts)
Project; Gas plant maintenance
Location; Kuwait.
Responsible for maintenance of the instrumentation on a LNG plant. Equipment used included Honeywell & Fisher CV’s & Positioners, Masoneilan level transmitters, Kent electronic local controllers. The control room utilized a Yokogawa DCS.
August 83 to September 86 Company; (Saif Est.) Aramco
Position; Senior Instrument Technician
Project; GOSP pre-commissioning
Location; Saudi Arabia.
Pre-Commissioning instrument control loops to a process control computer and/or a SCADA system on GOSPs & NGL plant. Equipment worked on included, Fischer Provox Plus DCS & Foxboro Spec 200 cards.
June 82 to June 83 Company; (Pesaco) Aramco
Position; Senior Instrument Technician
Project; Metering skid Commissioning
Location; Saudi Arabia.
Commissioning & maintenance of UGC Microflo & Jiskoot Process control computers on gas metering skids. Signals sent back to Dhahran via SCADA. This work was carried out for the Custody & Transfer Group, acceptable error was +/- 0.25%.
November 80 to June 1982 Company; Azzawiya Oil Refining Co.
Position; Instrument Technician
Project; Refinery
Location; Libya
Maintenance of pneumatic control loops & on the job training of local technicians.
References: will be provided on request.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 2001 to 2050 of 6543)
Go to Search Parameters...
Brief Description
Summary of skills Industrial Electrician Certificate(Canadian Interprovincial Standard ) Electrical Engineering Diploma Fluent in English, Russian, Ukrainian
Discipline – Project Engineer/QHSE Summary Having worked in the Oil and Gas industry for over 25 years both onshore and Offshore from Design through the build, pre-commissioning, mechanical completion to first oil and gas.
Looking for offshore employment
Date of birth 19th Oct 1949,Pakistan
Electrical supervisor for oil and gas industry.
i live in Pakistan now is my age 50 years old I want to work on Qater as a a/c technician.
My resume summary containing the interest letter, my contact information, education and information about my background and skills.
A highly motivated technician experienced in a broad range of disciplines. An effective communicator at all levels, adaptable and dedicated with proven record in maintenance, installation, management. An enthusiastic and ambitious achiever promoted by examination and personal recommendation.
Drilling Subsea Engineer with a wealth of experience.
Seeking an opportunity in the petroleum market in which my skills, strong dedication and technical abilities will benefit a progressive energy company.
British gas approved Grade-2 Painting Inspector since 1995 having over 20 years experience in Oil/Gas industry. Worked in Oman/UAE/Qatar as Painting Inspector cum Supervisor for Major construction and Service Contracts involving Major shutdowns.
Maintenance engineer - British national aged 39 years. 24 years spent in various positions in industrial maintenance - on shore/off shore gas plants, metals plants. in UK, S.Arabia, Libya, India, Sweden, S.Africa.
Looking for Cost Control/Project Engineer position in oil industry.
Seeking a position as a Offshore Barge Representative / Client’s Representative where my skills and previous offshore background will be an asset to your company. The attached resume covers my 20 plus years of overseas experience in the construction environment
very familiar with the relationship between gas drilling, gas production and gas end user
I am a Civil / Structural / Underground Services / Architectural, Designer / Detailer, CAD Technician fully conversant with all versions of AutoCad, Microstation and RC Packages including Reoforce
Over twenty years experience in Instrumentation & Control, Petro-chem construction, first as a technician, then supervisor/engineer to superintendent. Computer literate, able to liaise with clients & run a multi-national team.
An instrument/electrical professional with 19 years in the process/plant control industry. Excellent hands-on site and office experience ranging from Instrument Technician through Field Service Engineer to Project Engineer, both in the UK and overseas.
Multiskilled Engineer as Electrician/Electrical Technician/Tour Pusher/Driller
24 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment Specialist, in both Gas Compression and Liquids Sh
QA/QC ¡V Inspector civil and structural
I have been working abroad at the service of oil and gas industry, and I have had a great deal of experiences for the design of the largest DP3 drilling rigs and FPSO’s. My position as a lead representative for a large shipbuilder design team has taught me how to meet each customer's expectations.
6 years oil field services experience & enthusiastic oil safety
15 Years extensive experience in the cathodic industry. „»Handling independently turnkey project in the field of cathodic protection of underground structure.testing and commissioning of cathodic protection system.AC/DC Intereference investigation and mitigation.
GIS / CAD / Ms Office / Computer Skils /
I have been working as a scaffolding professional since 9 years in oil &gas field. I can read drawings and have knowledge of risk assessment, method statements, handing over certificates, F91- scaffold inspection procedures [ scaff-tags and ladder tags], SG 4 fall arrest systems for working at heigh
Senior Field Geophysicist ; involved in planning and acquiring seismic data, infield Data processing / Quality Control.
2003 graduate from U of Manitoba Canada. Worked for Exploration companies in Southern Africa. I work for an exploration consultancy company as a geophysicist. I process airborne Magnetic, radiometric and gravity datasets in search for kimberlites and base metals. Also process wireline logging data
Mechanical Engineering Degree holder. Seven years experience in inspection of pressure vessels, heat exchangers, piping , structruals, WPS, PQR, welding inspection , Knowledge of ASME codes
Completed diploma in electrical engineering and currently working with dubai petroleum as a electrical specialist. working as a 28/28 days rotation in offshore field.looking for a job as a electrical technician in offshore field.
Experience: 4 years in the field of Power plants design and Execution, Qualification: Masters in Structural Dynamics
Petroleum engineer
Production Engineer in several methods as: Gas Lift, Rod Pump, Jet Pump, Plunger Lift. High knowlegment in the surveallence of production process. I´ve been working to Petrobras since 1998 in the Eastern & Western of Venezuela. Now I´m finishing a MBA I hope to finish in July 2006.
Do have 20+ years experience as coating inspector and am Nace certified coating inspector # 12470, highly skilled and specialised in pipe & tank coating, GRE linings, FBE pipe coatings/field joints, plural pump application. Work world wide. CV on request.
Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.
Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.
Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer
More than 5 years of extensive experience of working on conceptual, basic and detailed equipment designing for Oil & Gas, Petrochemicals, Pharmaceuticals Plants including mechanical Design of Columns, Pressure Vessels, Heat Exchangers, wind & seismic analysis as per various national and internationa
I'am a Dutch Junior geologist. I hold a masters degree in Earth Science (university of Amsterdam). I worked little over a year in Almaty, Kazakhstan as a geologist/seismic interpreter. Flexible and willing to work in any of the CIS countries as a junior geologist. I speak Dutch, English and Russian.
A Post Graduate Mechanical Engineer with specialization in Energy conservation and management with an extensive experience in Basic Mechanical System engineering and Project Engineering for various range of power projects. Overall project coordination, Designing of various systems in Power plant
Familiar with Electrical & Instrumentation diagrams; Control & Protective relaying diagrams; Power System Single Line Diagrams. Able to perform material costing.
For the past 5 years my career with MES, CHEMIN,CEGELEC and TOTAL E&P, YEMEN has focused petrochemical, onshore oil and gas production operations in India and Middle East, now I am working as a Pre commissioning & Commissioning Engineer of the TOTAL E&P oil field located in Republic of Y
Currently Senior Piping Designer, responsible for design of piping systems to conform to codes and design parameters.
DCS engineer having 5 years experience in engineering / Commisioning/ Start up of YOKOGAWA CS3000 DCS System
Currently I am working in a leading oil and gas consultancy firm as a process design engineer since last five years. Hands-on experience in CDUS, VDUS, Visbreaker units, Hydrotreaters, LPG recovery units etc. My responsibility includes process conceptual design, process simulation, PFD with HMB etc.
B.E. MECHANICAL ENGINEERING WITH FIRST CLASS WITH DISTNICATION FROM REGIONAL COLLEGE OF ENGINEERING & TECHNOLOGU, SURAT. (JUNE-2001.)
Process Engineer with 5 yrs of experience in Oil & Gas field;B.E. (Chemical Engineering) from Jadavpur University, Kolkata with 86.45% marks, Hands on experiance in HYSIS, HTRI, Flarenet
E/I SUPERVISION for construction , commissioning of Oil & Gas processes
„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.
+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
[ 41 ]
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com