Resume - Instrument engineer

Misco Jobs

Resume #14699

CONTACT INFORMATION:
View contact information...

Exp. installation of all instruments & control equipment:
- Supervision / consultant C & I subcontractors
- DCS, PLC- System installation
- Configuration and loop test
- Pre-commissioning, commissioning, start-up
- Maintenance, planning
- QA / QC inspector

May 2006 - present
Company:
JGC Middle East FZE
Dolphin Onshore Facilities Project
Ras Laffan Industrial City, State of Qatar

Position: QA / QC Instrument Inspector

Responsibilities:
* Deals with reviewing of all ITP's/QCP/Method Statement/ Material Approval prior for project plan preparation.
* Coordinating with Construction Supervisor project plan drawing review-having AFC drawing officially approved documentation.
* Represent Company during weekly meeting concerning schedule plan activity and project plan on all tools and equipment needed for construction.
* Assigned to Review all Subcontractor Technical Documentation Circulation prior approval to all concerned lead official.
* Ensured instrument equipment works complied with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing the ISO 2000 and ISO 9000).
* Supervised and monitoring the flow of inspection on-site and calibration prior to meet the project deadline.
* Helps to give solutions to any problem arise for some discrepancy / errors of subcontractor conforming client advise prior for rectification and acceptance.
* Tasks to monitor all subcontractor activity prior for deadline start of Instrumentation Workload.
* Able to analyzed every area to be survey and witness prior for RFI to be offered to the main client for inspection.
* Deals with project specification accordingly having approved documentation.
* Assigned to witnessing repair and calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms.
* Turbine Instrumentation including Fire&Gas on the following: LM 2500, ABB GT 35.Rolls Royce.
* Analogue and digital controllers Fire&Gas detection/protection systems,
* ESD (Emergency shutdown), Pneumatic and hydraulic shutdown panels and control systems.

* Project Duties included review of loop folders for final acceptance by the QA/QC Dept. before transferring to Commissioning.
* To undertake inspection of vendor skids before final acceptance by client.
* On-site audits of subcontractor.

* Followed all safety practices and procedures and corrected unsafe work practices

Oct. 2005 – February 2006
Company: JAPAN GAS CORPORATION (J.G.C)
Location: Sohar Refinery Company
Sohar - Sultanate Of Oman
Position: Instrument engineer
Coordination of Instrument Punch List between sub-contractor and client. Also coordination between sub-contractor regarding the Inspection and Test Reports documentation related to instrumentation.

June, 2005-Sept.2005
UAE-Snamprogetti-Bu Hasa Project
Instrumentation/Automation Supervisor

Sept.2004-March, 2005

Kingdom Saudi Arabia-Technip-Aramco-Berri gas plant-
I & C Engineer
- Construction, pre-commissioning and commissioning

Feb.2004 - May 2004
Kingdom Saudi Arabia-SWCC-Mohamed Turki Preece Engineering Consultancy and
MOTT MAC DONALD (UK) – SWCC Rehabilitation Project Study –Life extension / Al
Jubail and Al Khobar - Desalination and Power Plants - East Coast.
I & C Engineer – Consultant
- Inspection and report about status of I & C System-Recommendations what to be replaced system whit an new; solutions for interface by components instrumentation and estimation cost.

Oct.2003 – Nov.2003
SIRTE OIL COMPANY- Libya - Attahaddy gas field
Instrument engineer – Commissioning team –DCS-ABB 2000.

May 2002 – April 2003
TSKJ BONNY ISLAND (NIGERIA LTD) for Techint Cimimontubi Company
Instrument supervisor
Here he worked for construction and mounted instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments and correction, DCS systems-FOXBORO, PLC, and SCADA.

February 2002 – May 2002
QUATAR PETROLLEUM – NGL 4 Project Dukhan.
Instrument supervisor
Employee of SNAMPROGETTI for pre-commissioning and commissioning start up of GTG Nuovo Pignone; MARK -V; DCS systems –HONEYWELL, TDC 3000.

August 2001 – February 2002
TSKJ BONNY ISLAND (NIGERIA LTD) for Techint Cimimontubi Company
Instrument supervisor
Here he worked for construction and mounted instrument and electrical equipment – switchgear and MMCI, pre-commissioning and commissioning, loop check of different types of instruments and correction, DCS systems.-FOXBORO.

May 2000 – August 2001
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher coordination refinery maintenance activities

May 1999 – May 2000
CHROME CONSORTIUM, Port Harcourt Refinery, Nigeria
Instrument supervisor
Directly involved in the specific works of Turn Around Maintenance and Rehabilitation Project. Performing maintenance works on instrument and control equipment, including metering devices, automatic valves, safety devices, fire detection. Elaborating daily reports and analysis on the maintenance works executed, following up the observance of workplace safety regulations, working in close collaboration with other skilled personnel: mechanical, electrical and operation staff. Proposing improvement on maintenance modification, recommending materials and tools and necessary actions enabling carrying out properly of the instrumentation duties.

April 1998 – April 1999
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher coordination refinery maintenance activities
Familiar with various kind of instrumentation equipment, like: Taylor, Foxboro, Hartman & Braun, Crowcrone, Masoneillan, Fea, Shimaden, Yokogawa, Fisher Rosemount, etc. Also participating in different activities for the electric and electronic equipment for automation of machine tools.

Dec 1996 – March 1998
TELFORD INTERNATIONAL ltd and Ansaldo Companies
United Arabic Emirates, Mirfa Power And Deslination Plant
Instrument supervisor
Controlling the correct mounting of the instrumentation and control equipment, and supervising the related putting into running works. Working together with specialists of ANSALDO ENERGIA and HARTMAN BRAUN companies. Also collaborating in the control and start up of the analysis systems, such as: analyzers of water oxygen content, carbon oxide and carbon dioxide analyzer, and analyzer of water conductivity.

1991 - 1996
ASTRA Refinery, Ploiesti, Romania
Instrument dispatcher
In charge with following up of the repairing and maintenance work schedules afferent to the instrumentation and the refinery plants, including the machine tools workshop.

1988 - 1990
BASRAH PETROCHEMICAL COMPLEX, Iraq
Instrument foreman
Involved in control of the regulating loops afferent to the pyrolysis plant, chlorine plant, and low and high pressure polyethylene. Participating in the putting into running of the plants. Also working in the workshop for repairing of the instrument electronic equipment. Collaborating with American, English and Iraqi specialists of LUMMUS Company.

1987 – 1988
PETROMIDIA SA CONSTANTA, Romania (Petrochemical works)
Instrument foreman in pyrolysis plant
Participating in pre-commissioning, commissioning and start up of the plant.

ASTRA Refinery, Ploiesti, Romania
Instrument repairing workshop, instrument electro-mechanic
In charge with repairing and maintenance of transducers and recording apparatus. Ensuring the service activities and control equipment of the following plants: CDU & VDU, gas fractionation, hydro-fining of mineral oils, oils de-asphalting. Also performing repairing and maintenance activities for the electric and electronic equipment for automation of machine tools.

1974 – 1986
DERO LEVER SA PLOIESTI ROMANIA (Détergent factory)
Instrument electro-mechanic for instrument repairing workshop

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 6635)

Go to Search Parameters...

Brief Description

Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions.

PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports

OFFSHORE STRUCTURAL ENGINEER, JACKET ,TOPSIDE, FPSO STRUTURE DESIGN EXPERIANCE

Worked for Offshore / Onshore for Installation, Construction of Offshore facility , Pipeline , Degree in Metallurgy, Piping Engg, ISO 9000, CSWIP 3.2, Painting Insp, API , ASNT Level II

Well evaluation,formation evaluation,basin evaluation and static reservoir 3D-model

More than Fifteen (15) years in Piping (Onshore and Offshore) & Pipeline Design experienced (Onshore) relating to oil & gas projects, petro¬chemical and cross-country pipelines.

Instrument Engineer with15 Years of experience

ELCTRICAL ENGINEERE

Level 4 scheduling in oil&gas with Primavera

Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.

Instrument engineer

Having 13 years experience Inspection activities on oil & gas, Pipe Line, Petrochemical and Off shore module structures. Have served with multinational Companies in Gulf. Familiar with ISO – 9000 Quality Management System requirement, International Codes and Standards. .

Ph, D. in Chemistry. Ten years experience as an oilfield corrosion engineer. Specialized in cathodic protection diagnostic surveys (CIPS, DCVG). Comprehensive computer knowledge (programming, database design). Internal corrosion protection experience (corrosion and scale inhibitors, biocides).

Basin Modelling, Geochemistry, Petroleum Geology, Prospect Generator, Charge Evaluation, Charge Risk Assessment, Seismic Interpretation

I have experience in all phases of both electrical and petroulem experience.

I have nearly 17 years of total experience in the oil and gas industry with 5 years experience as a Process Engineer before focusing my skills as Process Safety and Risk Engineer. My technical skills in Process Safety and Risk Engineering have been developed on significant international projects in

Mechanical Rotating Machinery and Static Equipments

Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.

Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.

Masters in automotive engineering

Senior Hydrogeologist

Production Geologist 25+ years experience. Expertise in Field Development, mature field integration, locating additional infill drilling targets.

Over 25 Years of Extensive Oil Industry Experience in Contracts Administration, Purchasing and Materials Controls. Presently working for the last two years as a CONTRACTS ENGINEER with RasGas LNG Company, Qatar. Seeking advancement and higher opportunities.

Over twenty years experience in oil and gas construction industries

Senior Reservoir Engineer

Total 24 years in various capacities in Oil refinery, Gas processing including Gas Cracker&Petrochemicals with Technical services & commissioning background that covers Process Design, Equipment rating, Troubleshooting, Plant change orders management, Capacity enhancement.

SUMMARY Professional Production Geo-Scientist with 24+ years experience in Geological and Geophysical interpretations. Technical expertise in Oil & Gas Field Development & Exploration, with the use of well logs, core descriptions, sequence stratigraphic & seismic stratigraphic concepts.

+15 years Experience in Engg & Design of Rotating Equipment , abilities to contribute at all stages of the Life Cycles of Large Projects, analyzing viability to assisting in preparing data for client presentation to preliminary engineering, on to detailed engineering, installation & commissioning

B.Sc. in Chemical Engineering (Gas and Petrochemical); 19 years experience in process facilities (more than 17 years in oil and gas industry). The summary of major duty is design, optimization, installation and operation of process equipment.

Overall 20 years experience in Design, Engineering, Project Coordination, Project management, Maintenance of Instrumentation, Analyzers & Control Systems of Major/DBN Hydrocarbon(Olefins) and Polymer(PVC/VCM) projects. Upgrades of DCS, PLC, SCADA, GC, Process Gas & Liquid Analyzers, CEMS A

32 years of work experience and present position senior most lead inst. engineer

Petroleum Engineer, twenty-two years experience, strong analytical Reservoir Engineering on implementing exploitation strategies for petroleum and gas reservoirs, and secondary recoveries techniques. Reservoir description and simulation. Reserves Assessment. Performance production evaluation. Econom

17+ yrs. experience in petroleum engineering from onshore/deepwater offshore (large) oil & (multi TCF) gas fields. Delivering reservoir/production engineering solutions for maximizing asset value by boosting production, well potential & technical integrity and improving overall business performance.

Production Technology and Operations

Complete Crude oil Analysis, Mud Analysis, Water Analysis, Special Core analysis, Procurement of Consumables and Instruments, Calibration and Maintenance of Petroleum & Analytical Instruments.

I have More than 35 years in the marine, oil and gas related industries,

A Sr. exploration Geologist, with extensive experience( 25 years) in oil and gas exploration: G&G and geochemical studies, play assessment, prospect identification and generation, team leader, project management, research of new exploration opportunities, JV , Bid round Data rooms ,etc.

20 Years Total Experience In Drilling As Drilling Engineer/ Drilling Supervisor/Well Planning, Well Control, IWCF Supervisor Passed

20 yrs experience Oil/Gas from Ground Up. Objective supported by: INTERNATIONAL PM MBA Ceng INSTRUMENTATION AND CONTROL HNC PROCESS CONTROL CONSTRUCTION SUPERVISION COMMISSIONING / AUDITING FISCAL MEASUREMENT SYSTEMS ENGLISH / SPANISH

Knowing Reservoir Simulation from inside (numerical modeling and coding) out (running commercial software). Seeking a Reservoir Engineering related position at Houston, TX to utilize my diversified engineering and business experience and 7 years of education in Petroleum Engineering.

A highly experienced operations geologist(12 years)based in UK with varied international experience in exploration(11 years)and development geology(7 years). Seeks a supervisory or team position in operations geology worldwide. Expertise includes deep water and high pressure wells.

TO HELP WITH MY EXPERIENCE,KNOWLEDGE LIKE SPECIALIST IN ARTIFICIAL LIFTING OIL PRODUCTION AND ENVIRONMENT, QUALITY OF ADMINISTRATION, SECURITY AND OCCUPATIONAL HEALTH Applying the knowledge acquired in the Masters of Management of Company and The Master of Finances and Business.

Petroleum Geologist with background in Exploration/Development/ Operations/ Wellsite geology with Major and independent operator. G&G interpretation using GeoQuest workstation: IESX, CPS-3, Wellpicks, Wellcomposite. Geological support to expl./Deve./Horizontal well drilling.

Having a strong background in Geology and three & a half years of International Oil Field experience, I wish to join a reputed company within the Oil Industry and build a career as a Geologist, Petrophysicist (Log Analyst) or Seismic Interpreter.

Xiao Ming Jiang A senior civil/structural engineer with experience in power station, SCR and FGD project design and project management.

BSc/MSc. 23 yrs experience. Expertise: sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Work experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40 geological basins in 25 countries.

A position in electrical maintenance.

Oil finder with 21 years experience in US and international exploration and production geology and geophysics.

Explosion Development Geologist, 23 years international Oil & gas experience. Also production geology well location assessment studies and well trajectory planning for highly deviated and horizontal wells. Experience in Landmark and GeoQuest ares, Unix knowledge and excellent PC skills.

BS and MS in Geology and 23 years of global industry experience with majors. Strengths include communication and interpersonal skills, and working in multi-disciplinary teams, horizontal well planning and geo-steering, production optimization, open and cased hole logs, computer mapping.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out