Resume - Im graduated of bachelor of science in civil engineering, I have 14 years experi...

Misco Jobs

Resume #15120

CONTACT INFORMATION:
View contact information...

EDUCATION

POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
Sta. Mesa, Metro Manila
1981 - 1986
BACHELOR OF SCIENCE IN CIVIL ENGINEERING

WORK EXPERIENCE

Sept. 23, 2003 to Sept. 16, 2004
Company: L.S.W. Engineering Pte. Ltd.
Address: # 01 Tuas Ave.11, Singapore 608615
Department: Engineering Department
Position: Senior Checker & Detailer

PROJECT INVOLVED
C822-Circle Line Stage-2 Mainline - Singapore
Through Econ/NCC J.V.
Woodlands Secondary School – Marsiling Rd. Singapore
Through – Kwan Yong Construction Pte Ltd
Changi Water Reclamation Project – Changi Singapore
Through Lumchang Construction Pte Ltd

Nov 28, 2000 to Sept. 09, 2003
Company: P.F. Engineering Pte. Ltd.
Address: # 12 Penjuru Close., Singapore 608615
Department: Engineering Department
Position: Project Engineer

PROJECT INVOLVED
Ministry of Defence "ATTC" (All Terrain Tracked Carrier.) - Singapore
Through S.T.Kinetics.

July 01, 1999 to Jan. 02, 2000
Company: H.S. Epim Engineering Pte. Ltd.
Address: # 03 Benoi Rd., Singapore 629877
Department: Engineering Department
Position: Senior Checker & Detailers

PROJECT INVOLVED
Kuito Field Phase1 FPSO, Module 2 & 3 (Chevron Petroleum Inc.) - Singapore Through Single Buoy Mooring Inc.
Espadarte Field FPSO, Module 1 & 2 (Petrobras) - Singapore
Through Single Buoy Mooring Inc.

December 01, 1998 to June 30, 1999
Company: Henry Structure Detailing Pte. Ltd.
Address: King George Bldg., Singapore 208567
Department: Engineering Department
Position: Structural Checker & Detailer

July 1998 to December 1998
Company: POLA Engineering Pte. Ltd.
Address: 14 Kian Teck Way, S'pore 628737
Department: Engineering Department
Position: Senior Checker & Detailer

PROJECT INVOLVED
POSB Bank H.Q. - Singapore
Through Ssang-yong Engineering and Construction
North East Line MRT - Singapore
Through Yongnam Engineering
North East Line MRT – Outram Park (Singapore)
Through Land Transportation Authority

October 1997 to June 1998
Company: Ikeshita Architect & Engineering Consultant
Department: Engineering Department
Position: Autocad Operator & Detailer

PROJECT INVOLVED
Trellis Tower – Toa Payoh Lorong 1 - (Singapore)
Through Shimizu Corporation
River Place Condominium – Havelock Road (Singapore)
Through Takenaka Corporation

DUTIES & RESPONSIBILITIES
1) Assist in product design and generate detailed drawings.
2) Reviewed design drawing and technical specification and develop cost effective solution to fulfill customer requirements.
3) Assist in drawing control and documentation.
4) Provide fabrication drawing such as vessel, piping and structural (e.g. platform, stair, handrail, ducting and all steel structure) for shop execution.
5) Prepare material cutting plan, cutting list, template and material take-off for job execution.
6) Perform technical drawing study and part inspection (dimensional, visual) and functional test at varies stage.
7) Plan and implementation of work schedule and progress to meet the required workforce according to the master and detailed work programmed.
8) Receiving inspection of steel material and heat number against mill certificate.
9) Coordinate and liaise with client and sub contractor for daily progress and the important matter to prevent miss understanding.
10) Supervise skilled and general worker (e.g. fabricator, welder and helper) for fabrication and erection.
11) Conducting site/field inspection for verification of some matters and providing As-built drawings for client future reference.
12) Carry out site supervision for (color banding, valve tagging & punch listing) and other task assign by immediate superior.
13) Preparing piping isometric on P&ID and material take-off for ordering necessary materials.

March 1993 to September 1997
Company: Al Zamil Heavy Industries, Ltd.
Address: P.O. Box 13169, Jeddah 21493, K.S.A.
Department: Engineering Department
Position: Cad Operator / Structural & Vessel Detailer

PROJECT INVOLVED:
Saline Water Desalination – Jeddah Saudi Arabia
Through Mitsubishi Heavy Industries
Tanks & Silos – Riyadh, Saudi Arabia
Through NABATI Company
500m³ Cement Silos – Riyadh, Saudi Arabia
Through Saudi Liebherr
Boiler Ducting – Rabigh, Saudi Arabia
Through Mitsubishi Heavy Ind.
Hot Belt Stabilizer – Riyadh, Saudi Arabia
Through Stone & Webster Engineering Co.
Air Duct to Wind Box – Shoiba, Saudi Arabia
Through Korean Heavy Industries (Hanjung)
Pipe Rack Steel Structure - Ras Tanura, Saudi Arabia
Through Cerrey Co. (Mexico)
Platform for Storage Tank - Ras tanura, Saudi Arabia
Through Flour Daniel Arabia
Low Pressure Vessel Aramco (ASME Code)- Shaybah, Saudi Arabia
Through Bechtel Ltd.
Discontinuous Blow Drum – Jeddah, Saudi Arabia
Through Technimont-(Italy).

DUTIES & RESPONSIBILITIES
1. Study client drawing and specification to provide shop drawing for the reference and information of shop personnel to ensure the correct fit-up and lay out of material on shop fabrication..
2. Checking and revising the drawing if there is client or designer comment, and there is material change.
3. Preparing external transmittal of finished drawings for submission on review and approval of designer and client.
4. Making a progress chart on every project to determine the critical condition and to avoid delay in delivery schedule of such project.
5. Using new software in drawing technology of computer ("IGPL" & Autocad Rel. 13) on structural and vessel drafting.
6. Preparing accomplishment report of assign project from day to day.

February 1992 to February 1993
Company: Olayan Descon
Address: Jubail, K.S.A.
Department: Engineering Department
Position: Engineer III

PROJECT INVOLVED
Fertilizer Conveyor – Jubail, Saudi Arabia
Through Saudi Arabian Fertilizer Company
Tie-Ins (M.T.B.E.) IBN Zahr – Jubail, Saudi Arabia
Through Snamprogetti - (Italy)
Silos & Tanks – Jubail, Saudi Arabia
Through Mitsui Engineering & Shipbuilding Co.
Heat Exchanger – Jubail, Saudi Arabia
Through A.Y.T.B.
Pin Fan Cooler – Jubail, Saudi Arabia
Through A.Y.T.B.
Platform & Stair – Jubail, Saudi Arabia
Through IBN-Baytar

DUTIES & RESPONSIBILITIES
1) Responsible for the generation, issuance and maintenance of quality documentation.
2) To provide a system of check taken, at pre-determined stages of fabrication, to ensure that aspect essential to the correct operation.
3) Perform visual, dimensional, N.D.T.(M.P.I. & Dye Penetrant) inspection for the assign project to meet the requirement procedures of the clients.
4) Provide all the documents pertaining to such project liked, dimensional inspection report, welding inspection report, material test certificate, hydro- test inspection report.
5) Responsible for the safety rules and regulation of the factory to prevent any accident that may occur.
6) Perform any other related task that may be assigned by the immediate superior from time to time.

May 1989 to January 1992
Company: Grandspan Development Corporation
Address: Bo. Tayuman, Binangonan Rizal, Phil.
Department: Estimating Department
Position: Estimator/Project Coordinator
PROJECT INVOLVED
1. Philippines Asahi Glass Corp. - Pasig Metro Manila
Through DMCI Construction
2. Essential Maintenance Facilities - Clark Air base
Through DMCI Construction
3. Jing Guang Centre - Beijing China
Through Nippon Steel Corporation
4. United Overseas Bank Plaza - Singapore
Through N.K.K. Corporation
5. SOGO Project - Hong kong
Through Nippon Steel Corporation
DUTIES & RESPONSIBILITIES
1) Prepare quantities of take-off describing every item needed for project in detailed indicates quantities required.
2) Analyze comparative advantages and estimates cost using different method in fabrication and application of substitute materials according to the standard.
3) Prepares progress report and production forecast of assigned project.
4) Perform regular site inspection of on-going project and coordinates with the construction personnel for the progress and speed-up of erection.
5) Prepare daily accomplishment report for in-coming and out going project to determined the status of a project.
6) Handle 20 to 25 skilled personnel regarding the execution of work (Lay-out man, Fabricator, Welder & Helper).
7) Coordinates with construction superintendent of assigned job on delivery requirements.

QUALIFICATION

Experience in Detailing and Checking of Structural Steels as per AISC Standard and knowledge in basic design of vessel as per ASME VIII Div.1 and Storage Tank as per API 650 respectively.

SPECIAL SKILLS

Knowledge in Autocad Rl. 13, 14, 2000, 2002 & 2004

SEMINARS/TRAINING ATTENDED
Training on I.G.P.L.
Sponsored by Al Zamil Heavy Ind. Jeddah, K.S.A.
(January 15 to February 23, 1994)
Training on Autocad Rl. 11
Sponsored by Grandspan Dev. Corp. Binangonan, Rizal
(January 5 to January 27, 1992)

CHARACTER REFERENCE

Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7014)

Go to Search Parameters...

Brief Description

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out