Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #15846
next resume »»
CONTACT INFORMATION:
View contact information...
A. WORKING EXPERIENCE:
1. September 2004 – Present: Senior Operation Geologist – Total E&P Indonesie.
I currently work as a Senior Operation Geologist for Total E&P Indonesie, in charged to monitoring 3 rigs from office. My main responsibilities include:
- Help wellsite geologist to do their tasks (well correlation, decide final drilling depth, supervise wireline logging job, picking pressure test points, etc).
- Conduct a meeting before drilling started or in any necessary drilling event.
- Collect all the information and validate the data from rig site.
- Transfer all matters related to drilling operations to dedicated asset and communicate in every morning meeting.
- Check final well report which was performed by wellsite geologist before issued.
2. January 2002 – September 2004: Wellsite Geologist – Total E&P Indonesie.
I was assigned as a team leader of ENSCO-1 rig. My main responsibilities include:
- Decide final drilling depth.
- Supervise drilling and mud logging operation with respect to gas calibrations and performed Gas while drilling analysis.
- Made masterlog with Winlog software in the field.
- Retrieve, describe and supervise the core handling.
- LWD and Wireline logging supervision and performed quick look interpretation.
- Update the Senior Operation Geologist in town with respect to Top of Hydrocarbons.
There are numbers of wells with various type (delineation wells, development wells, and water injection wells) have been drilled under my supervision in Tunu, Senipah and Peciko Fields, most are HPHT wells. After drilling operations, the data was processed using Winlog, GWR, and Geolog6 and the output followed by a comprehensive Final Well Report of each well.
3. December 2000 – January 2002: Development geologist - Chevron Texaco.
Projects include:
- Seismic interpretation and isopach mapping using IESX and CPS-3, leading to reserve calculation in Topi and Cebakan Fields, South Sumatra.
- 3D modelling using Geoframe and Gocad software for Cebakan field and propose 1
vertical well and 2 horizontal wells (well results confirming the 3D model built).
- Wellsite duty in Bekasap, Cebakan and Sebanga Fields with various types of wells.
- Monitoring horizontal wells by updating and verifying markers during the operation.
- Establish geological database (log data, markers, check shot, etc) for Bekasap AMT
using Finder software.
- Assisting the reservoir engineer for work-over decision by preparing well data and stratigraphic correlation.
4. January – November 2000: Teacher - VISI
Taught mathematic, physic, and chemistry for junior and senior high school.
5. July – December 1999: Self Employee – CV RAMADHAN
Managed family business in garment sector with 10 employees.
B. EDUCATIONAL BACKGROUND:
1994-1999: Bandung Institute of Technology, Indonesia (BSc. in Geology).
IPK: 2.94 (Scale of 4) and Scholarship from PPA and IOM.
1994-1999: Senior high school, SMAN 38 Jakarta
Best student in school.
C. ACADEMIC EXPERIENCES:
1995 – 1998: Assistantship in various laboratories:
Geomorphology, Micropaleontology, Petrography, Geotechnic, and Field geological mapping in Karang Sambung.
1998: Coal Mapping on Bojong Manik.
1998: Geological Mapping on Sumedang (undergraduate thesis)
The title is "Geology and Foraminifera Analysis on Subang Formation, West Java"
D. ORGANIZATION EXPERIENCES:
1991 – 1994: Youth Red Cross in high school as a vice of chairman.
1994 – 1999: HMTG "GEA" (student union) as a secretary.
1999 – 2000: Puja Junior (badminton club) as a chairman.
E. COMMITTEE EXPERIENCES:
1995: One day seminar "Geological Information for City Planning" in ITB, Bandung.
1999: One week seminar about geology in ITB, Bandung.
F. COMPUTER SKILLS:
- Geoscience Application (GEOLOG6, CPS3, IESX, STRATLOG, GOCAD, DIPS, STRESS, SURVER,
NEWPET, ILWISH, GWR, GRAPHER, WINLOG)
- Operating System (UNIX, SQL, DOS)
- Database (FINDER)
- Windows Application (Word, Excel, Power Point, etc.)
G. ACHIEVEMENTS/AWARDS:
- Best student in school of 38 senior high school.
- Award for the 24 hours horizontal well monitoring.
- Award for 3D Modelling and Horizontal well design in Cebakan Field.
H. TRAINING:
1. Technical Training
May 2003: Logging while Drilling (LWD) – Dennis Ferment (Total E&P Indonesie)
Jan 2003: Drilling Operation and Core Handling – Antoine Jeannou (Total E&P Indonesie)
Nov 2002: Log Interpretation - Laurent Moinard (Schlumberger).
Oct 2002: Advance Mud Logging – Daniel Gardette (Total E&P Indonesie)
July 2002: Gas while drilling – Dennis Kandell (Total E&P Indonesie)
May 2002: Mud Logging Course for Well Site Geologist – Bosco Pareira (Geoservices)
Dec 1998: Coal Mapping on Bojong Manik - PPTM
2. Software Training
Jan 2003: Winlog Pro - HRH
Apr 2001: CPS-3 – Schlumberger
Mar 2001: Finder Casual User Training – Duri Training Centre
Mar 2001: Reservoir Modelling using GOCAD - Bekasap Technical Team
Feb 2001: UNIX – Duri Training Centre
Feb 2001: SQL training – Duri Training Centre
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 3901 to 3950 of 6445)
Go to Search Parameters...
Brief Description
B.Tech. (Chemical Engg) NIT/REC India; MBA (Finance) 2~3 yrs experience in Project Management
Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room
Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).
Piping using CAESAR II, AutoCAD etc & MS-Office B.Tech Mechanical
Up to (10) years experience in oil and gas industries at onshore and offshore fields for coating of steel structure, vessels, storage tanks, equipment, pipelines, offshore fixed platforms and single buoy mooring.
Planning Engineer, Certificate of degree Dr. of Philosophy
Oil/Gas Refinery Safety Supervisor/Engineer
Over 14 years experience in Quality Assurance / Quality Control (QA/QC) activities with various reputed organizations in different Projects. Familiar with ASME, API, AWS & other international codes and standards. Highly energetic, motivated, dedicated professional with strong communication and team
Hardworking, responsible, career oriented, highly motivated, independent and trustworthy
Experienced and innovative Reliability maintenance engineer with technical leadership in operation and maintenance activities, quality achievement, reliability, efficiency. High level of management skills with outstanding leadership and training /monitoring skills.
Masters degree qualified, Previous experience as a QA/QC Engineer on a gas plant and pipeline laying project, looking to move into upsream operations preferably drilling and completions engineering or facilities engineering
Petroleum Engineer
Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.
Four years of professional experience with international engineering companies. System-level knowledge of PLCs, HMI Packages, Controls Programming and Electrical Design. Hands-on experience with object-oriented software simulation, design, implementation and verification techniques.
Any job related to oil/gas & refinery in anywhere in the middle east.
a chemical engineering graduate (B.Sc) and presently doing a masters degree in oil and gas engineering at the Robert Gordon university Aberdeen.
I would like to apply as a Geologist/ Petrophysicist. I am an post graduate from Indian Institute of Technology, Mumbai, in Geoexploration. I have experience of about 2 years in open hole log evaluation, during my employment with Schulmberger Asia Services Ltd.
Assigned to carry out preventive maintenance of 415 Volt electrical and motor control and plant lighting and building lighting. Familiarized with various electrical wiring and switching socket for computer supply. Wiring motor control for single phase and three phases.
Good knowledge in Maintenance of Oil/Gas and Refinery equipments and procedures.
i am working as electrical supervisor in wapda pesco and lokking to go abroad my cv is attached.
Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/
Instruemntation with Spc.in DCS/PLC/SCADA & metering system
: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units
Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience
Quality, Environmental and Occupational Health & Safety Management Systems specialist, ISO 9001:2000 Lead Auditor, Quality Circles, Six Sigma, Use of Statistical Tools, Training, Auditing etc.
Razan Saleem Naman
Control & Instrumentation Engineer with 17 years of experience in Projects, Manufacturing, Operations, Technical
I am ready for use - I do not like office job only offshore or onshore hardworking zone
BBA Graduate, Diploma In Industrial Electronics, Simatic S5 Plc, Modicon Quantum, WinCC, Viewstar2000' Instrumentation, Capability Of Designing Various Control System, Good Knowledge Of Computer
Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)
Experienced in running a safe, productive, team based work place and the use of maintenance planning and recording computer systems. Have knowledge and understanding in heavy equipment and shop maintenance. Excellent in heavy equipments electronic engine, hydraulic and electrical troubleshooting.
Mechanical Engineer
I just finished bachelor of applied in petroleum engineering degree and seeking an entry level position in petroleum engineering. Your engineer in training position would perfectly prpeare me a carrier in drilling and completion engieering. I am flexible to travel any where in the world.
Civil Engineer with an experience of 15+ years in IT area, managing, supervising, consulting and delivering IT solutions for the Oil and Coal Industry. Knowledge and experience in strategic planning, project management, e-learning, and Process Reengineering. Good HR activities and knowledge
Experienced in plant O & M(power plant/LPG Terminal),execution of expansion/greenfield projects,material procurement,tendering/contracts management as well as statutory compliance
Proficient in the use of specialized engineering software includes AutoCAD2006, Tekla Structures (X-Steel), STAADPro2005, ETABS (CSI software) PCA Software (PCAbeam, PCAcolumn & PCAmat), and Profis (Hilti Anchor Bolt design software). Has basic knowledge in frameworks (PDS).
Experienced Project Management Professional (PMP) looking for a Project Manager position with your professional organization
I have 14 years experience as Electrician in Oil and Gas Company. I am a high motivated person and hard working. Currently I still work with Unocal Indonesia Co. as a technician. I am able to work under pressure and quick adapt with working in team or individual.
Operation Geologist with 5 year experiences.
Experienced in Reservoir Simulation, focussed and goal oriented, Natural Gas Engineer
Qualified Petroleum engineer
I am very competent in my field as a geologist/geoscienentist highly trained at one of the best schools in the world (Imperial College London) also competent with advanced software and computing systems. I have a good background of team work and a sound knowledge of the risks, politics and dynamics
System Engineer, IT Specialist
I am a highly motivated young engineer, flexible and mobile. I am self-confident but able to adapt myself to an interdisciplinary group or an integrating team.
I am specifically looking for automation – Instrumentation related job.
Seeking a position as a Petroleum Reservoir Engineer/Technician
Graduate Mechanical Engineer with five year Experience in Engineering Company
To Work in the Field of Design And Managing the Development Of Electronic Systems in Dcs (Distributed Control System) and Scada Where I Can Enlighten My Knowledge in Instrumentation And Electronic Areas such as Plc Programming And Applications, Slc5/04 (Allen Bradley, Siemens ), Communication Syst
Technical/ Managerial, Computer literate, Proficient in MS Office 2000, and engineering related software.
Environmental monitoring and safety
First
Prev
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
[ 79 ]
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com