Resume - Mechanical / Piping Engineer

Misco Jobs

Resume #16715

CONTACT INFORMATION:
View contact information...

OBJECTIVE Senior Mechanical / Piping Engineering Level

EDUCATION & TECHNICAL QAULIFICATIONS
1 B.Sc. in Mechanical Power Engineering at June 1991, Alexandria University,
Egypt.Final Graduation Grade: (Very Good) Graduation Project: (Excellent) 95%

2 Member of Egyptian Society of Mechanical Engineers.
3 Member of Egyptian Engineering Syndicate.
4 Saudi ARAMCO Approved Engineer as (Eng. I)

Languages
Arabic Excellent (As a native Language).
English: V. Good (Spooking, Read & Write).

Training Courses
1. Using (CAD-CAM) for design of process piping systems. Implementing packages of (Piping, Steel Structure & Cable Trays) for modeling of Petroleum and Industrial Plants). (3-D & walk through Modeling using Sun-spark Stations).
Computer- Vision Automated Design & Drafting Systems (CADDS Version 5.0.3).
2. Using HAP (Hourly Analysis Program to estimate HVAC load calculation & equipment selection)
3. Using CAESAR Stress analysis program, for modeling pipelines and Critical piping (high pressure / high temperature). For estimation of the maximum permissible stresses in the system.

PC Skills MS DOS MS Windows XP MS Project Planning AutoCAD 2000

PRACTICAL EXPERIENCE
SAUDI CONSOLIDATED ENGINEERING COMPANY (SCEC- K&A)
March 2004 –Present
Mechanical & Petroleum
Piping Division.
AS
Senior mechanical Engineer.
Design & supervision of different mechanical systems for petroleum& industrial plants Saudi Arabia – Al-Khobar branch.
- Designing of Piping systems such as Trunk lines, Flow lines, Tie-in Manifold, Isometric Drawing, P &IDs, Plant Layouts.
- Preparing piping calculation, piping specification and final material take-off.
- Designing of HVAC systems, Plumbing internal piping systems.
- Designing special systems such as (fire fighting system, Compressed air, waste oil Disposal) for industrial /petroleum facilities
- Maintaining the designed systems in compliance with the controlling and governing codes.
Related Professional Skills
Implementing Different Industry Standards such as American Society of Mechanical Engineers (ASME), American National Standards Institute (ANSI), National Association of Corrosion Engineers (NACE), and American Society for Testing and Materials (ASTM), American Petroleum Institute (API), and Saudi Aramco Engineering Standards (SAES) for different piping design phases related to Saudi Oil Company, SABIC, SAMIR (Morocco) & others.

AL-SWAILEM Ltd FOR COMMERCE AND CONTRACTING (MASCO)
Jan., 2003 - March, 2004
Mechanical Division.
AS
Senior electro-mechanical Engineer.
Construction supervision of different mechanical systems for Al-swailem compound (30 Villas) Saudi Arabia –
Al-Khobar branch.
Managing, Directing, Executing Electro-mechanical works for residential compound (30 Villas) including:
1 Preparing the electrical & mechanical workshop drawings.
2 Re-Design Main Project Equipment (Reverse Osmoses Plant)-(Domestic - Irrigation & Fire) pump stations.
3 Planning & Scheduling for different project Electrical & mechanical activities with co-ordination with civil activities.
4 Preparing Detailed Bill Of Quantity (B.O.Q) For Project activities.
5 Studying technical & commercial offers for subcontracting electrical & mechanical systems and selecting the most appropriated subcontractor.
Professional Work activities
Electrical Activities
- Internal Electrical circuits (Power & Lighting).
- External Lighting circuits.
- External Power & Lighting main Cables network.
- Installation of (MDP - DP- PP - MCC).
- Meter Room activities.
- Internal & External Low Current Systems (Fire Alarm - Telephone Sys. - CCTV - Centralize satellite receivers).
Mechanical Activities:
- Installation of different pump stations for different utilities: (Domestic - Fire -Irrigation).
- Installation of pump room piping systems.
- Installation of Reverse Osmoses Plant (R.O.P).
- Installation of external (Domestic - Irrigation - Fire - Drainage) networks.
- Installation of swimming pool system.
- Installation of Sauna and steam rooms systems.
- Installation of HVAC System: (PACU "58 off " – Int. Duct works – Ext. duct works & m/c connection)
- Internal Plumping Works (Water Supply & Drainage).
- Centralize Water Heaters & circulating pumps

Saudi Bin-laden Group – Rush Projects Division (RPD)
Nov., 1997 - June, 2002
Mechanical Department
As
Mechanical project manager Construction of different mechanical systems for royal places & high class residential buildings Saudi Arabia
Riyadh branch
Managing, Directing and Executing Electro-mechanical works for high class residential buildings & palaces:
1 Executing the electrical & mechanical workshop drawings.
2 Installation of main Project Equipment (Reverse Osmoses Plant - Domestic, Irrigation & Fire pump stations).
3 Planning & Scheduling for different project Electrical & mechanical activities with co-ordination with civil activities.
4 Reviewing Detailed Bill Of Quantity (B.O.Q) For Project activities.
5 Supervising related subcontracting activities including monitoring & evaluation of mechanical subcontractors.
Professional Work activities
- Installation of different pump stations (Domestic - Fire -Irrigation).
- Installation of pump room piping systems.
- Installation of Reverse Osmosis Plant (R.O.P).
- Installation of external network for Domestic - Irrigation - Fire - Drainage).
- Installation of swimming pool system.
- Installation of Sauna and steam rooms systems.
- Installation of HVAC System: (Central Package Units - Internal Duct works - External duct works and m/c connection)
- Internal Plumping Works (Water Supply & Drainage).
- Centralize Water Heaters along with circulating pumps.
- Installation of Elevators & dump waiters.
- Diesel generators Fuel Supply & Exhaust Systems.
- Gas Supply piping systems.

ENGINEERING CONSULTANTS GROUP (ECG)
Jan. 1993– Nov., 1997 Mechanical & Petroleum
Piping Division
AS
Senior Piping Engineer Design & supervision of different mechanical systems for petroleum& industrial plants Egypt – Cairo branch.
- Design of process Piping systems including Preparing Process Piping design drawings using (CAD - CAM)
For different piping systems of industrial & petroleum plants.
- Prepare Piping Isometric fabrication Drawings.
- Prepare piping calculation, piping specification and final material take-off.
- Design of piping supports for different piping systems.
- Design special systems such as (fire fighting system, Compressed air, waste oil Disposal) for industrial / petroleum facilities
- Maintain the designed systems in compliance with the controlling and governing codes.
Related Professional Skills
Implementing Different Industry Standards such as American Society of Mechanical Engineers (ASME), American National Standards Institute (ANSI), National Association of Corrosion Engineers (NACE), American Society for Testing and Materials (ASTM) and American Petroleum Institute (API) for different piping design phases related to projects belongs to international & national firms such as:
1. Sugar & Integrated Industries – Egypt
Project: (Extension & Rehabilitation of Qumobo Factory- Upper Egypt).

2. Proctor & Gamble – Egypt
Project: (New boiler house - Steam Piping System).

3. Alexandria National Iron & Steel Factory
Project: (Second Direct Reduction Plant - SDRP)

4. Suez Oil Company (SUCO)
Project: Preparing As-Built Piping Drawings for (G.O.S.P) for (LPG. Plant) & Platforms.
(Sites of "Zeit pay - Ras Budran - Ras Fanar)
5. Sugar & Integrated Industries - Egypt
Project: (New De-aerator Plant of Nageh Hammadi Factory).

6. Asia Brown Bovery (ABB) - Egypt
Project: (Design & Installation supervision for Non - critical small bore piping (1"-3")

7. Caltex -Egypt
Project: (Lub. Oil Blinding &Mixing Plant).
Professional Work activities:

1 Studying & Selecting Suitable equipment As P.F.D. (Process Flow Diagram).
2 Preparing Preliminary Plant layout.
3 Piping System Classification & streams analysis.
4 Preparing an elementary piping Line Designation List.
5 Preparing piping specification for each stream based on the operation conditions & the nature of each working medium.
6 Preparing a Conceptual Design for Piping & equipment.
7 Preparing Final plant Layout wit co-ordination with the following disciplines: (Tanks & Pressure Vessels - Instrumentation - Electrical - Structural & Civil - Environmental).
8 Preparing piping arrangement drawing based on final (P & ID) -Line designation list - piping specs- final equipment & pressure vessels - Instrumentation system design -Electrical cable trays layout - main racks layout - Environmental recommendations.
9 Preparing a CADDS model for the plant.
10 Creating piping isometric drawings using CADDS.
11 Preparing piping support details.
12 Preparing stress analyses Reports for critical pipes (High pressure /High temperature).
13 Preparing final B.O.Q. for the project.

Saudi National Pumps (SNP)
Dec., 1991 – Nov., 1992
Mechanical Department
As
Mechanical Engineer
Selection & installation supervision for deep well vertical turbine pumps. Saudi Arabia
Riyadh branch
Selection & installation Supervision of deep-well vertical turbine pumps
Professional Work activities
- Design & Selection of pumps based on well data analysis.
- Selection of suitable engine drive (Diesel engine).
- Selection for suitable transmission gear.
- Installation supervision for the sold pumps.
- Troubleshooting, Inspection & reporting of installed pumps.

(References are available upon request)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7014)

Go to Search Parameters...

Brief Description

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out