Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #16784 next resume »»
CONTACT INFORMATION:
View contact information...

Resume of Experience (HSE SPECIALIST)
Senior Safety Engineer(HSE)
Experiences: 12 years

EDUCATION:
B.Sc., Science, Chemistry, Cairo univ, 1992, Very Good, OSHA DIPLOMA, 2000

HISTORY:
Starting from the design phase of any project, constructions,commissioning,startup and operation for plant complex and its refineries utilities. Supervise the team work and staff of SHE department,

SHE Engineer – From 2002-2003
Qatar Petroleum, QP
Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Auditing, work permits (hot, cold, isolation etc ), Monitoring systems (fire, gas), Risk assessment, safety advising, air, water &soil quality control (FLORA & FONA) systems, matching the laws and rules of the local authorities for all types of emissions (hydrocarbon, toxic gases, dust and smoke). All accidents reports (cause & effect & incident and near miss, Training master instructor for operations.
The refinery consists of atm. distillation, naphtha reformer, G.O,KER hydrotreaters, H2S recovery, Amine regeneration, gas sweeting, VRU, FCC, Condensate refinery, and all utilities boilers, I.A, N2 gas, water treatment

Project SHE Team Leader from 1998 - date
Miser Oil Processing Company (MOPCO) - SUEZ
Of the Hydrocrackering Complex Project:
Which consists of Hydrocracker, Vacuum, Hydrotreater, Visbreacker, Sulfur Recovery, Sour water and Amine Units, H2S units of gas sweeting and all utilities like instrument air, boilers, water treatments and etc.
I can do all safety and environmental protection activities in our complex starting from studying case of the ITB and vendors proposal of each unit and equipments, construction hazards and duties and contractors facilities ( basic design and detailed design ) to commissioning with its activities for wielding tests with radioactive materials and rays, startup and steady operation in addition to fire fighting process. Make all risk analysis systems (qualitative and quantitative), all accidents reports (cause & effect & incident and near miss).
I can prepare all the documents of the HAZOP files procedure, the sequences of the emergency plane, shutdowns of any petroleum plants to reach the safe mode for the equipments and persons workers. working with the automatic fire fighting systems as splinkers, deluge, smoke, gas and fire detectors. Application of the advanced control systems in the safety philosophy of the project, connection with the authorities in case of emergencies of the plants. Preparation of the ITB for personal protection equipments as in NFPA, ASTM, BS and ANSI codes. Where I was trained also on the operation of the units which are: Vacuum distillation units, I can operate its conditions as in tower temperature gradient, furnaces operation, flow of the crude oil in piping, pumps operation of the fluids, chemical injections through the desalter and heat exchangers by dosing pumps, collecting the feed and products samples from the different points through refining process, operation of the new plants whatever it is by the manual systems and also by the automatic manner as computers and DCS sets( Fisher, Yokogawa,ABB, Evaco, Honeywell and Simens), where all of those are in training theoretical methods as the project are still under construction by Snamprojetti contractor and Kaverner John Brown management.

HSE Specialist from 1995 - 1998
Nasr petroleum Company NPC - SUEZ
Crude Distillation Units. As shift leader to keep the operation in steady case and make all work permits for maintenances jobs to safe energy and time for the following units:
- Vacuum distillation: three units where I operate to the construction punching team to deliver the equipment's as towers, pumps, furnaces (commissioning and start up), heat exchangers, water coolers, air coolers, vacuum system, ejectors, chemical injection of ammonia - contol anticorrosive and fuel oil firing system. All of those are practically to produce asphaltine, preparing daily reports of products specifications and operation.
- Atmospheric Distillation units: four units - CD1 A,B,CD2, CD3,VRU, Naphtha treatment, Butane treatment, Flare, Oil cacher, Skim basin, where I operate to the construction punching team to deliver the equipment's as towers, pumps, furnaces (commissioning and start up), heat exchangers, water coolers, air coolers, vacuum system, ejectors, chemical injection of ammonia- contol anticorrosive - soda water - deimulsfier and fuel oil firing system. All of those are practically to produce butane, kerosene, gasoil, gasoline, naphtha and mazote fuel oil. I can operate its conditions as in tower temperature gradient, furnaces operation, flow of the crude oil in piping, pumps operation of the fluids, chemical injections through the desalter and heat exchangers by dosing pumps, collecting the feed and products samples from the different points through refining process, operation of the new plants whatever it is by the manual systems and also by the automatic manner as computers and DCS sets (Fisher, Yokogawa, ABB, Evaco and Simens), Oil movement and transportation from ships to storage tanks and through pipelines to the refineries.

Lab and quality control shift leader from 1994
Chemist in NASR CO. for chemicals industries - SUEZ:
in units of Hydrogen gas, ammonia gas, sulfuric acid, Nitric acid, Ammonium nitrate, water treatment units, where I am dealing with all the experiments and tests for the ores and products through the production process (concentration- gravity, purity, sieve analysis), water tests for boilers ( TDS, PH, HARDNESS, SALTS content, Conductivity, phosphate, Silica, Iron content, Alkalinity,

Safety Site Engineer from 1992 - 1994
John Brown Deutsche Engineering – ATTAKA - SUEZ
Where I work in the construction team and start up operation team as safety site engineer in Hydrogen gas plant and its utilities to prepare HAZOP procedures for the unit. Also I work in the construction team and operation of ammonium nitrate plant and prepare all the documents of the environmental reports for the authorities in Egypt. Sharing in the head team of the HAZOP and HAZAN for all components of the unit.

LANGUAGES:
ARABIC and ENGLISH Fluent read, spoken and written. Good technical vocabulary, little Germany and French.

PERSONAL
Good user for Windows 95, 98,XP, Excel & Word, Power Point, Oracle 7, COPRA operator, Internet knowledge and Driving License. Safety trainer for national petroleum project for advanced labor.

TREANING COARSE
OSHA safety specialist, Risk assessment, Emergency preparedness Petroleum industry, energy conservation, chemical engineering, Sea Scout International leader, Safety, Fire fighting, Environmental protection and lighting protection, Gas Free Certified.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2051 to 2100 of 6519)Go to Search Parameters...
Brief Description
INSTRUMENT TECHNICIAN FOR OIL & GAS FIELDS
Cathode Protection Engineer / Manager with more than 10 years of experience in marine, off-shore etc with knowledge of design, tenders, standards etc.
Expert in Environmental Engineering, I plan to work and live in Abu Dhabi.I am qualified in Environmental Protection for: Environmental Certification, Environmental Surveys, and Environmental Pollution Monitoring for Oil & Gas Industry with 10 years experience.
Professional Experience 1. Schering-Plough Singapore as Control Systems Engineer 2000-present 2. Yokogawa Philippines Inc. as DCS Systems Engineer 1996-2000 Education 1. Bachelor of Science in Computer Engineering 2. Diploma in Instrumentation & Control Technology
Over Nineteen plus years of experience in the areas of Maintenance Management, Planning and "Hands On" Supervision of maintenance activities, installation and commissioning of new facilities.
A Chemical Engineer with over 12 years of experience in the field of Safety & Risk consultancy. Trained in leading HAZOP studies, QRA, HAZOP, HAZAN, PHA, Review of Fire Detection & protection Systems, Safety Audits, Transportation Risk Analysis, Insurance Risk Surveys, etc.
Senior wireline logging engineer seeking a full time position as logging witness/supervisor
Electronics Engineer/Technician
I have 16 years of experience in welding and NDT Inspection. I have welding and Painting Inpsection Qualification. I have experience in pipeline, process piping, pressure vessels inspection.
Self-motivated and responsible individual with over thirteen years experience in well services operations and supervision offshore, working effectively within a multi-disciplined team, proven ability to carry out all tasks at a high standard and thorough knowledge of health and safety practices.
Oilfield equipment workshop or field supervisor/manager seeking overseas position worldwide. Immediately available. Prefers "hands on" environment and a demanding position.
•Project Design: Feasibility Studies of Integrated Architecture System, Proposals, Functional Specifications, Detail Design Specifications, Electrical Drawings and Schematics.•PLC Programming.•HIM Configuration.•Networks and Communication.•SCADA Design and Configuration.•Testing and Commissioning.
i have total 9 years experiance in oil and gas ,petrochenical industry.at present iam working in petroleum Development oman.oman.
Tubular running services technician
Engineering graduate with 25 years experience of working on Offshore Jack Up Rigs & Deep Drilling Land Rigs up to the position of Drilling Supervisor (Role included Efficient Operation & Implementation of HSE Policy).Working as IWCF/IADC Instructor , Drilling Consultant, Senior DrillingEngineer
Diploma holder in mechanical engg,12 yrs of exp in Marine , oil and gas project execution.
Field engineer specialized in MWD jobs and MWD / LWD Technician
Quality, Health and Safety, Environment Engineer
Petroleum exploration 15 yrs, environmental/geotech consulting 15 yrs
Good command of responsibility and leadership skills, Ability to work under pressure, Co-operative and self motivated, good computer skills, and excellent reporting skills, as well as presentation skills
Engineering graduate with MBA having about 2 decades of experience in developing and administering Contracts in Oil& Gas, Petrochemical and Engineering fields. Skills include Strategy development, Risk analysis, develop Contract documents, Evaluation/negotiation and award, Contract management.
Marine Engineer with 7 years expereince
M.B.A. Marketing/ Engineering in mechanical
Process Design Engineer
3D plant design modeling Plant Design System (PDS), MICROSTATION ,AUTOCAD 14 to 2004, , CADWORX, Smart plant review ,for piping layout, structural steel and pipe supports, equipment modeling, isometrics and BOMs.
Registered Electronics and Communications Engineer of the Philippines with 7-years experience in Petrochemical and Oleochemical Industry
Over 16 years experience in 2D and 3D seismic acquisition and processing projects: Currently at Kelman Technologies International Tripoli Processing Centre, involved in both 2D and 3D testing. In addition, doing the user support at KTI Tripoli and in charge of the system admin Sun and Linux
A Dynamic Business Development Manager with Accomplished Experience of 7 Years in the Aviation Industry
Coating /welding inspector
Instrument ( Pre-Commissioning & Commissioning ), Maintenanance, Supervising, Technician
I have nearly 7 years of solid experience in package equipment engineering for oil refineries, petrochemical, chemical, mining ang gas processing plants. It entails basic and detail design engineering such as preparation of requisitions, specifications, proposal evaluation and document review.
I am especially interested in this position because my experience as a Mechanical technical office superintendent in the oil, gas & petrochemical field has prepared me to manage all technical mechanical jobs. I'm looking forward to using this experience for enhancing the success of your company.
I am herman susanto has BGAS Painting Inspector grade 3/2, I was Graduated from sriwijaya University and my Facult is Mechanical Engineering
Attend meetings on site,Research for suitable solutions and estimating costs and timescales,Liaise with others in the design team,Liaise with clients and contractorsPreparing product documentation, writing reports and giving presentations,Supervision and erection of substations, HT/LT Electric.
I am a qualified Instrumentation Diploma Engineer and having 10 years of well experience in instrumentation field of Maintenance, Commissioning, Installation and Shutdown activities in oil and gas well heads, petroleum refinery, petrochemical and power plant industries.
Experienced Mudlogging Geologist
Graduate Engineer with multi discipline skills, hands on and managerial experience in Industrial Services and commendable 12 years of experience in Inspection, NDT, QA/QC, and testing in E & P, Oil & Gas sector in international environment. ASNT L3-API-AWS, CSWIP-NACE
A highly skilled Well Site Geologist over 15+ years experience for shell Oman include 11 years with Baker Hughes Inteq, worked mostly in (vertical, deviated and horizontal) deep high pressure and temperature gas wells (include the deepest gas well in North Oman 6235 m), some exploration and develo
Experience in Marine construction of port and breakwater.
22 years of diverse experience in the Oil and Gas Industry in support and professional positions
Knowledgeable in Procurement, Materials Management and Piping.
Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas
Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.
6 years exp in piping design engg field
I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area
M.Sc. Geologist, looking for a job in oil industry
Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments
Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)
Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits
Analysis Estimation-Officer 10 years as operations engineer in power plant
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   [ 42 ]   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com