Resume - Facility Manager

Misco Jobs

Resume #1702

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a challenging position in an international company where I can contribute my experience and enthusiasm to the company's benefit and meet my personal expectations.

EDUCATIONAL BACKGROUND
* Texas A &M University / U.S.A. Spring 99 - Fall 00
Mechanical Engineering, Graduate Program (Master of Science)
* Middle East Technical University /Turkey Spring 98 - Summer 98
Intensive English
* Kirikkale University /Turkey Fall 93 - Spring 97
Mechanical Engineering, Undergraduate Program

EXPERIENCES

06/2006-present Facility Manager, Binagadi Oil Company, Baku/Azerbaijan
Working as a Facility Manager at Binagadi Oil Company (BOC), a production services firm in the oil and gas industry.

My duties and responsibilities are as follows:

* Direction and organization of 7 engineers and 60 workers (including foremen, crew and team leaders)
* Maintenance, repair, construction and erection of pipelines, storage tanks, pumps, compressors, separators, valves and sucker rod pumps
* Monitoring the contractor activities such as storage tank repairs, drilling location preparations and internal road constructions.
* Direction and organization of Daily Meeting with other disciplines

Also working as Project Manager of the "Waterflooding Project".

09/2005-06/2006 Mechanical & Steel Group Chief, GAMA Al Moushegah Arabia Ltd., Jeddah/Kingdom of Saudi Arabia

Project: Shoaiba Steam Power Plant, Stage II, Phase I & II (6x367 MW)
Owner: Saudi Electricity Company (SEC)
Contractor: Alstom Power Inc (USA) and SARCO Consortium
Sub Contractor: GAMA Al Moushegah Arabia Ltd

Worked as a Group Chief directly responsible to Construction Manager.

My duties and responsibilities are as follows:
* Direction and organization of 2 engineers, 130 steel erectors, 15 mechanical erectors, 15 boiler erectors, 15 pipe fitters (including foremen, crew and team leaders)
* Erection of GR (Gas Recirculation, 2 per unit), FD (Forced Draft, 2 per unit) and ID (Induced Draft, 2 per unit) Fans (total 6 per unit)
* Erection of Circulation Pumps (3 per unit)
* Erection of Condensate Pumps (2 per unit)
* Steel structure erection (including platforms, stairs, gratings and handrails) of boilers and Air Pre Heaters (APH) (~ 2350 tons per unit, total 3 units: phase I) + remaining steel, platform and stairs erection of Phase I & II boilers (6 units total)
* Steam Drum erection (~ 180 tons)
* Hoists Installation (9 per unit)
* Completion of Punch Items
* Shutdown works including boiler, piping and instrumentation

02/2005-09/2005 Chief Engineer, TPAO Turkish Petroleum Corporation,
Ankara/Turkey

Project: Kuzey Marmara & Deirmenköy Fields Underground Gas Storage
Owner: Turkish Petroleum Corporation (TPAO)
Contractor: Lurgi AG - Fernas Insaat Consortium

Worked as Chief Engineer directly responsible to Construction Manager.

My duties and responsibilities were as follows:
* Direction and organization of 3 engineers and 30 technicians.

Responsible for:
* Piping department
* Pipeline department
* Equipment erection (package units such as compressor units, HC dew point adjustment, dehydration etc.)

08/2001-02/2005 Project/Site Engineer, TPAO Turkish Petroleum Corporation, Ankara/TURKEY

Worked as Project/Site Engineer responsible to chief engineer at "Kuzey Marmara & Deirmenköy Fields Underground Gas Storage Project.

My duties and responsibilities were as follows:
* Technical Committee Member for Contract Negotiations
* Checking and approval of calculations, design, manufacturing and erection projects of all process equipments
* Auxiliary Systems such as Drinking Water Treatment, Waste Water Treatment, Fire Fighting Systems, Water Supply etc.
* 3x10 MW + 5MW Gas Turbine driven Centrifugal Compressor Packages
* HC Dew Point Adjustment Unit
* Checking and approval of Pipeline Procedures (16"x13 km, 20"x3.5 km and 6"x1 km), Alignment Sheets and Crossings, also control the construction of pipelines
* Piping, Slug Catchers and Inlet Filters
* API and ASME Tanks, manufacturing & construction and hydrotests
* Checking and approval of design & construction projects and calculations of HVAC & Plumbing Systems also control the construction of the systems
* Control of Steel Structure Fabrication and erection
* Control of Process Equipments manufacturing, tests and erections
* Training of entry level Mechanical Engineers and technicians to adapt them to the project
* Preparing monthly "Activity Reports" to be submitted to General Directory of Petroleum Works
* Following up and translating of the "Monthly Progress Reports" that are submitted by the contractor
* Checking the "Interim Payment Certificates" that are submitted by the contractor and writing the payment letter to the Financial Department of Turkish Petroleum Corporation
* Translating the necessary documents of the project

02/2001-08/2001 Surface Facilities Engineer, Turkish Petroleum Corporation, Ankara/Turkey

Worked as surface facilities engineer at the International Projects Department
* Training in Thrace Region Oil and Gas Fields (15 days)
* Training in Batman Oil and Gas Fields, Dodan CO2 Production Process (45 days)
* Training at Onshore Drilling for 1 week

09/1997-08/1998 R&D Engineer, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/Turkey

Worked as R&D engineer at R&D Department
My duties and responsibilities were as follows:
* Creating 3D Models using AutoCAD14.
* Designing new products (valves) and machinery such as lathe.
* Direction and organization of 20 workers and an engineer.

Summer 96 Intern, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/Turkey

Worked at manufacturing and R&D Departments
Worked closely with senior engineers to develop new valves.

Summer 95 Intern, TUPRAS Kirikkale Oil Refinery, Kirikkale/Turkey

Attended Work Safety & Fire Fighting Training
Practical training about basic machine tools such as lathe in the workshop
Worked with engineers to start up steam turbines of Thermal Power Plant

01/2001-09/2005 Technical Consultant, KARDELEN Engineering & Consultancy Company, Kirikkale/Turkey

Worked as Technical Consultant for Engineering, Energy and Oil & Gas Industry.

09/2004 - 10/2004 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/Turkey

Project: 2004 year Engineering & Maintenance works of Kirikkale Oil Refinery
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company

Worked as Site Manager for the Engineering & Maintenance works of Kirikkale Oil Refinery during the Shut Down (S/D) and Battery Shut Down (BS/D) period.

Responsible for:
Direction and organization of 26 workers and an engineer for the equipment erection, piping, mechanical, civil, electrical works and hydrotests.

10/2002 - 04/2003 Deputy Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/Turkey

Project: Naphtha Filling Platform
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company

Worked as Deputy Site Manager for the construction (including steel fabrication) of Naphtha Filling Platform at Filling Facilities of Kirikkale Oil Refinery.

08/2002 - 09/2002 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/Turkey

Project: Reconstruction of Heating & Plumbing System
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company

Worked as Site Manager for reconstruction of Heating & Plumbing System of the Kirikkale Oil Refinery's Apartment Complex.

08/2002-04/2003 Technical Consultant, Guneygaz Corporation, Kirikkale/Turkey

Worked as Technical Consultant for Engineering, Oil & Gas and Energy Industry.

SKILLS
Hardworking, dedicated and resolute to take responsibility. Strong analytical thinking ability, communication skills, ability to work under pressure and capability of motivating others.

Knowledge of PC, advanced user of Microsoft Applications and comfortable working with the following programs:

AutoCAD, ANSYS, Pro/E, ALGOR
Hands on Experiences on Powder Processing

TECHNICAL TRAININGS and CERTIFICATES
Training Course on Centrifugal Compressor for Operation and Maintenance;15-17/03/2005
(Siemens AG; Duisburg, Germany) (have a certificate)

Training Course on Gas Turbines for Operation and Routine Maintenance;
07-11/03/2005
(Solar Turbines; San Diego, USA) (have a certificate)

CNC programming; Spring 1996 (1 term course and 1 week special practical training at Steel Factory of Mechanical & Chemical Industry Corporation (MKEK), Kirikkale/Turkey)

Pneumatic Training Course; 10-16/06/1996
(KOSGEB; Ankara/TURKEY) (have a certificate)

Aeromodeling Beginning Course; June 1990 (Turkish Aeronautical Association, Areomodeling School; Ankara/TURKEY) (have a certificate, B)

ACTIVITIES
2002-present; Charter Member & First President of Turkey A&M Club
1998-present; Student Member of ASME
1997-present; Official Member of The Union of Chambers of Turkish Engineers and Architects (UCTEA) Chamber of Mechanical Engineers
1999-2000; Former Member of Trap & Skeet Club at Texas A&M University
1999-2000; Former Member of North American Fishing Club
1999-2000; Former Member of North American Hunting Club
1999-2000; Former Member of National Rifle Association

AWARDS
Best fourth undergraduate degree: Mechanical Eng. Dep. of Kirikkale University

SCHOLARSHIPS
* 1998 –2000 from Turkish Petroleum Corporation (full scholarship to pursue a MS degree in USA)
* 1993 –1997 from Turkish Ministry of National Education (during undergraduate education)

CREATIVE PRODUCTS
Thesis
- Ertekin, A. "Effect of Doping in Bi-Sr-Pb-Ca-Cu-O Superconductor Composites", Master Thesis, Texas A&M University U.S.A. (2000)
- Ertekin, A. "Material Separation and Transportation by the Pneumatic Systems", Undergraduate Thesis, Kirikkale University, Turkey (1997)

Posters
- Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T., Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", Applied Superconductivity Conference' 2000 Pavilion Center, Virginia Beach, VA

Publications
- Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T.,
Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", IEEE Transactions on Applied Superconductivity, (2001) vol.11, no.1, pp. 3446-3448.

Photographs
- Ertekin, A. "Take My Photo", Chasing Dreams, The International Library of Photography, 2000

- Ertekin, A. "Offside", Lasting Illusions, The International Library of Photography, 2000

- Ertekin, A. "Best Place For Resting", Journey's End, The International Library of Photography, 2000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5401 to 5450 of 6543)

Go to Search Parameters...

Brief Description

Site Engineer, Operations Control SPecialist, BAggage Attendant, Buyer

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries

Contract Administration- Tender Bidding Exercise

water and waste water power plant, steam, laboratory, analysis chemical chemist

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

Mudlogger I`m able to work in any company

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

NEBOSH level 6, NEBOSH Level-3, IOSH Managing Safely, Diploma in Fire Engineering, Diploma in Industrial Sfety

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Metallurgical Engineer

I have 30 safe Years as a Manager, Engineer type,Supervision, Safety, and a Heavy Crane Operator that excels working on Lift Studies, Safety, Meetings, Man Power, Crane Assembly/Dissemble/Boom Changes, and written Lift Procedures.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Engineer Project / Instrument

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Extensive Experience in the industry!!

Experienced in design & engineering - feasibility, conceptual study, basic and detail engineering, project management(EPC,EP,MC,PMC), proposal preparing, in the field of oil and gas and petrochemical industry

B.Sc Engineer in Metallurgy & Materials Science with 10+ years experience in Quality and HR department

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Facility Manager

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

Lead Drillig Fluids Consultant internationally for the past 6 years. Worked with the following operators: BPTT;TOTAL ; Maersk; Exxon Mobil;Rasgas. Worked with both oil and water based fluids.

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

Engineer in Saudi Arabia

i am Associate Engineer

Seeking a position to utilize my Knowledge, communication and leadership skills to the best of my capabilities for the betterment and development of self and my organization.

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Junior geologist with one plus year of experience including but not limited to geologic mapping, core and chip logging, soil sampling, drill logistics, and ARCGIS familiarity.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

15+ years experience HSE oilfield operations. Experience includes, drilling, completions, construction Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Ex Radio-Officer in The Merchant Navy...experienced in Marine HR Management

Diploma in chemical Technology with 7+ years experience in Various process industries like Petrochemical,chlor-alkali,Soaps & Detrgents,Fatty acid industries, etc.

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

Intenational welding engineer diploma from Austria (IIW)

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

Today professionals must become part of the company’s teamwork approach to accomplishing projects on time and budget. doing things differently, more effective, or more efficiently. I search for Early Responsibilities, achieve Technical Challenges.

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

Have around 17 years in the area of Industrial & Process Automation including Safety Systems, which involves Study of process, application development, testing and implementing Control systems Software and Hardware

First Prev 101 102 103 104 105 106 107 108 [ 109 ] 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out