Resume - Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and off...

Misco Jobs

Resume #17216

CONTACT INFORMATION:
View contact information...

"There is no Shortage of Technical Information, but Knowledge and Experience are valued Commodities."

OBJECTIVE:
To work and live in harmony with my Personal and Professional values developing
People and Technical skills and to improve the Lives of myself and people around me whether Technical or Non-Technical and apply the same to the growth of the Organization.

PROFESSIONAL EXPERIENCE DETAILS.
An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.
Coil Tubing Service Supervisor, Well Intervention Services and Specialize on Practical Application / Running of Coil Tubing as Follows.
* Single String, Dual Strings and multi Zone Completion applications.
* High and Low Pressure, Deep and Shallow Vertical, Deviated and Horizontal H2S and none H2S Wells.
* Coil Tubing / Nitrogen Lift on well that unable to overcome well hydrostatic pressure for natural flow.
* Coil Tubing wellbore clean out, using concentrated fluids or Foam Nitrogen.
* Coil Tubing Matrix Acidicing with deferent chemicals composition.
* Coil Tubing sand Control by use of Sand consolidation fluid in fine sand stone reservoir, Gravel packing through CT or Run ceramic beads and place sand screen to prevent sand migrations.
* Coil Tubing Logging Wire Services, Logging / perforation on Real time Mode on Vertical / Deviated and Horizontal wells, None Wire services on Memory Production Log (MPLT) either on Track Tack high rig-up or deployment systems.
* Through Tubing Coil Tubing Completion using deferent production sizes tubing Packers including Eclipse Model Packer.
* Coil Tubing Cementing, Squeeze or Plug back
* Coil Tubing Drilling / Milling.
* Coil Tubing Down Hole Tools. Fishing, Open / Closing of Side Door Sliding Sleeves (SSD), Pull / Setting of Prong and Plug on XN nipples in were wire-line becomes inoperative.

SAFETY TRAINING.
* Journey Management.
* Emergency Response.
* Management System Audit.
* Mechanical Lifting.
* Fire Fighting, Prevention And Mitigation.
* Explosive Safety Awareness.
* Risk Identification.
* Health Safety and Environment (HSE) Passport usage.
* Information Technology Security.
* Personal Security.
* High and Low Pressure Hazard.
* Injury Prevention
* Personal Protective Equipment (PPE)
* Loss Prevention Team.
* Hydrogen Sulfide (H2S)
* Radiation Safety Awareness
* Back Compressive Forces.
* Drug And Alcohol.
* Electrical Safety.
* Environmental Awareness.
* First Aid
* Man Riding Checklist
* Health Hazard Awareness
* Rigging And Slinging
* Pollution Prevention
* Waste management
* Manual Lifting
* Offshore survival Awareness
* Fall Protection
* Lock Out \Tag Out
* Stepping, Handling And Lifting
* Hazardous Chemicals Materials (HAZCOM).
* Confine Space Entry.
* Extreme Climate (Cold or Hot)
* Noise And Nuisance Awareness.
* Permit To Work (PTW)
* Desert Driving.
* Defensive Driving

* Ability to Stand or walk for long hours, kneel, stoop, crouch, or crawl during troubleshooting, Maintenance or repairs. Using Mathematics and scientific methods to solve Oil/Gas equipments in Well Services Operation. Ability to carry / complete multi stage Acid Volume calculation and preparations in remote Locations were bulk batch mixed stimulation fluids transportation are untenable.

* Good knowledge of safety practices on and off the job site for being Health Safety and Environment Trainer/Coordinator in Schlumberger Well Services (Dowell), Ability to communicate effectively, both orally and in writing. Skilled in Record keeping.

* Recommend method for improvement of operation, streamline and updating
Administration process, jobs planning, execution and evaluating the effectiveness of services to client jobs objective.

* Maintaining current knowledge on newly emerging technology.
* Investigating potential and actual service problems and recommends solutions

POSITIONS HELD IN THE OIL AND GAS INDUSTRY

* 2003 to Date; Coil Tubing Supervisor MB Petroleum Services LLC, Sultanate of Oman.

* 2000 - 2002, Health Safety and Environment (HSE) Instructor Schlumberger Nigeria as Consultant.

* 1989 - 1999, Coil Tubing Supervisor Schlumberger Well Services (Dowell) Nigeria.

* 1988 - 1989, Cementing / Pumping Services Schlumberger Well Services (Dowell) Nigeria.

* 1985 - 1988, Health Safety and Environment (HSE) Coordinator in a big Station Schlumberger Well Services (Dowell) Nigeria

* 1980 - 1985, Equipments operator Schlumberger Well Services (Dowell) Nigeria

PROFESSIONAL TRAINING COURES / CERTIFICATES.

* 1985 = Road Safety by the Royal Society for Prevention of Accident (ROSPA) in UK.
* 1986 = Safety @ SFC PAU in France.
* 1988 = First Aid Training by Red Cross Society.
* 1989 = Service Technician Training (STT) @ Shlumberger Well Services (Dowell) UK Training Center.
* 1991 = Coil Tubing Supervisor @ Schlumberger Well Services (Dowell) UK Training Center.
* 1992 = Coil Tubing Advance @ Schlumberger Well Services 9Dowell) UK Training Center
* 1996 = Well Control School @ Schlumberger Well Services (Dowell) UK Training Center.
* 1998 = Well Control School @ Schlumberger Well Services (Dowell) UK Training Center.
* 1998 = Safety School @ Schlumberger Kellyvile Training Center USA.
* 2001 = Road Safety, Train the Trainer's school @ Schlumberger Kellyvile Training Center USA.
* 2003 = Safety Leadership training by RANDYSMITH TTRAINING SOLUTION @ Muscat in the Sultanate of Oman, Middle East.

COMPUTER SKILLS.
Software: Microsoft WORD, Excel, Access, Power point.
* Good knowledge of Coil Tubing Sensor Interface data acquisition.
* Good knowledge of ORION data acquisition for Coil Tubing / Pumping application.

EDUCATION:
General Certificate of Education (GCE) & National
Diploma (OND).

VISA STATUS: - Engineering (Professional Visa)

NATIONALITY: - Nigerian.

LANGUAGES: - English (Written/spoken-Proficient and fluent)

ABOUT MYSELF
I am dynamic, intelligent, confident, challenging and good team leader, A person with a positive approach towards life and excellent communication and interpersonal skills. Responsible, self-motivating, flexible, willing to travel.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7055)

Go to Search Parameters...

Brief Description

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

Offshore Rig Safety & Training Coordinator.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out