Resume - Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years exp...

Misco Jobs

Resume #1754

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
Jan 2004-May 07 Drilling supervisor Lukoil Server in northern Russia. Upgrading Russian rigs with Western equipment and drilling techniques to work under day work contracts. Improvements have been made in mud system equipment, mud, hydraulics, PDC bits and well control. Drilling time has been reduced %30

Nov.- Dec 2003 Chevron/Texaco Drilling supervisor on jackup in GOM.

Sept.-Nov 2002 Petrolog Inc. Lagos, Nigeria Rig Manager for Great Wall Drilling Co. Chinese owned land rig drilling horizontal development holes.

July 2001-Feb. 2002 Drilling Supervisor on semi for El Paso Energy and Fairway Exploration offshore GOM and Turkey.

July 1999-June 2001 ARAMCO Dhahran, Saudi Arabia. Drilling Supervisor and Bit Specialist. Did compressive strenght analysis. Stopped use of PDC bits in hard sandstone and replaced with hard formation, PDC enhanced tri cones. Bit run time was increased from one day to a week with tricones

August 1995- Dec. 1998 Tecpetrol, Argentina. Drilling Supervisor on deep high pressure exploration gas wells in Northern Argentina. Initial holes were exploration with foam and deep high pressure. Deeply involved in bit selection. Killed 5,000 PSI water kick.

November 1993- Aug.1995 Force Energy, Santa Fe, Pennzoil, CNG. Series of Drilling Supervisor jobs in GOM.

Feb. 1993-May 1993 Oxy Oil & Gas, Geoilbent FSU Drilling Supervisor in Russia

May 1991-Sept. 1992 AMOCO Congo, MER Engineering, Canadian Triton, GEMAN. Series of Drilling Supervisor positions in Africa, FSU, GOM.

Nov. 1988-Dec. 1991 Terra Verde Ranch, Athens, Texas. Worked 2,000 acre cattle ranch. Took 27 hours of computer science and Spanish in local JC.

June 1986-Nov. 1988 Ocean Drilling Program, TEXAS A&M UNIVERSITY Shipboard Operations Supt. on DP ship doing deep water coring for National Science Foundation.Introduced use of spud mud to core through unconsolidated sand

July 1985-April 1986 HUFFO Balikpan, Indonesia. Drilling Supervisor Balikpan, Indonesia. Drilling Supervisor. Oil went to nearly $ 10.BBL.

April 1985-May 1978 Tenneco Oil Co.. Lafayette. La. Senior Drilling Engineer and Drilling Supervisor GOM. Wrote original paper on how to drill under drive pipe and not lose returns. Credited with saving one million dollars.

April 1978-Jan. 1972 Continental OIL CO. Houston, Texas. Drilling Engineer and Drilling Supervisor OKC, Norway, Wyoming, Dubai, Scotland and Indonesia.Did a lot of pore pressure and well control work.

January 1967-Nov. 1971 Mobil Oil Corp. New Orleans. La. Drilling Engineer three years in GOM and Drilling Supervisor two years.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 6997)

Go to Search Parameters...

Brief Description

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Integrated Geoscientist & Reservoir Geophysicist-Geoscientist/3D Modeler

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out