Resume - Mechanical Field Service Technician

Misco Jobs

Resume #18505

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Talented Field Service Technician with 20 years of solid background in turbo machineries, high-speed rotating machineries, reciprocating machineries and production equipments; with strong emphasis in the technical field. Experienced in maintaining and operating oil and natural gas compression facilities.

QUALIFICATIONS:
Excellent working knowledge of the operation and maintenance of engines, compressors, and of gas compression plant operations. Effective understanding of the requirements to operate, troubleshoot, overhaul, rebuild and modify different makes and models of centrifugal and reciprocating gas compressors. Achieve service operational objectives by contributing information and recommendations to strategic plans and reviews; preparing and completing action plans; implementing production, productivity, quality, and customer service standards; resolving problems; completing audits; identifying trends; determining system improvements; implementing changes. Plan service objectives by determining requirements; defining; assembling; and scheduling required service resources; confirming costs defining service measurements. Resolve issues by obtaining and coordinating reaction among service areas. Update job knowledge by participating in educational opportunities; reading professional publications and maintaining personal networks.

EDUCATION:
1980-1983 Airframe & Power Plant Technician, Colorado Aerotech (USA).
1983-1984 Associate Degree, Community College of Denver (USA).

EMPLOYMENT:
2/2003-9/2004 Independent Consultant, Universal Compression Inc. (Brazil).
Providing full array of technical support, analyzing, servicing and troubleshooting for all makes/models of reciprocating gas compressors and equipments installed in the pipeline and gas compression facilities owned by UCI. Assisting in properly scheduling maintenance of units to prevent unscheduled maintenance issues. Performing functions to disassemble and/or assemble units at job sites. Assisting in Commissioning, start up and operation of 13 compressor packages in the Sao Paulo area (TBG-Brazil). Maintained relations between the customer and the organization on all service matters.

2001- 2003 International Technical Support, The Hanover Company (Venezuela).
Providing technical support and troubleshooting to achieve reliable operation of the compressor packages in the eastern region of Venezuela. Assisting in properly scheduling maintenance of units to prevent unscheduled maintenance issues. Performing functions to disassemble and/or assemble units at job sites. Directed technical support issues to the appropriate technical service resources and followed through to final resolution. Worked in Colombia as part of a team of engineers providing guidance and oversight (contractor supervision, technical & strategic project advise, support, etc. as required) during the execution of construction, pre-commissioning, commissioning and start up phases of the Oil and Gas Floreña Project for British Petroleum (BP).

1998-2001 Customer Service Manager, Cooper Cameron (Venezuela). Responsible for business development opportunities, providing aftermarket parts and services for the oil and gas industry in the east region of Venezuela. Coordinated the shop day to day operations of all in-shop production work and outside services; overseeing direct personnel assigned to the shop. Responsible for safety and organization of the shop area and yard for employees and customers, in order to provide tours for the purpose of promoting in-house capabilities for all aspects of the business. Traveled on aftermarket parts and services promotion to Argentina and Bolivia.

1985-1998 Maintenance Supervisor, PDVSA (Venezuela).
Coordinating and conducting all the maintenance activities involving preventive, corrective maintenance and major overhaul at the offshore gas compression platforms on the Maracaibo Lake. Also involved on the minor and major maintenance inspections for General Electric LM-2500, Rolls Royce RB-211 gas generators and related centrifugal rotating machinery. Duties included the rebuilding of Dresser Rand and Cooper Natural Gas centrifugal compressors.

TECHNICAL EXPERTISE:
Install, analyze, maintain and ensure proper operation and/or repair of production machinery (Centrifugal and Reciprocating Equipment) in the field. Specifically experienced with Dresser Rand turbo compressor packages including GE LM2500 gas generator/DR-61/DJ-270G power turbines, 4M10/462B DR centrifugal compressors. Also experienced with Coberra 2000 and 6000 Avon & RB211 gas turbine packages including: Avon and RB211-24C Rolls Royce gas generators, RT-48/56/62 Cooper-Bessemer power turbines, and RBB & RCB C-B centrifugal compressors. Limited experience with commissioning and start up of reciprocating packages such as: Waukesha AT27GL/Ariel JGC-4, L5790GL/JGE-4, Superior 16SGT/WH-64, Waukesha L7044GSI Series Four, L7042GSI/GL. Experienced with programming and troubleshooting of Waukesha CEC's (DSM, AFM, IM and TCM II). Familiar with Caterpillar gas engine applications, installation, commissioning and operation G3500; G3500 Cooling Systems/Lubrication Systems; G3500 Ignition Systems/Starting Systems/Engine Protection Systems; G3600 Cooling Systems/Heat Recovery/Lubrication System; G3600 Engine Basics/Ignition Systems/Starting Systems/Supervisory System. Familiar with the Ariel Performance Program, Allen Bradley 5550 & SLC-500 ControlLogix Controllers, MC-Series Murphy Millennium Controllers, Woodward 2301D Load Sharing and Speed Control for Engines. Rely on limited experience and judgment to plan and accomplish goals. Maintain relations between the customer and the organization on all service matters. Able to troubleshoot electrical and PLC systems as well as equipment to minimize filling down time. Provide technical support by identifying and resolving mechanical, electrical or control issues while in the field. Read and interpret technical material such as electrical, instrumentation and mechanical drawings, prints and manuals. Document, communicate and actively work on closing all start up related open action items. Establish communication, upload and download project files using Rockwell Software, FW Murphy Millennium Software and Woodward Controller Software. Provide feedback to engineering and quality assurance for the purposes of improving the design and performance of custom systems.

CERTIFIED TRAINING:
ATGL Engine Technology and Service (Dresser-Waukesha)
Engine Control Technology (Dresser-Waukesha)
Light Vehicle Training Course (Schlumberger)
Introduction to Platform Operation (Dresser-Rand)
The Mini-State of the art Seminar (General Electric)
FT 100 Controls Introduction (Cooper Industries)
FT 100 Controls (Cooper Industries)
R-R Gas Generators/Lube Oil System (Cooper Industries)
C-B Power Turbine/Centrifugal Compressors (Cooper Industries)
Installation/Commissioning of Rotating Packages (Cooper Industries)
LM2500 Familiarization, Level I Maintenance/Bore scope Inspection (General Electric)
Fuel Injection System (Cessna Training)
Single Engine Electric System (Cessna Training)
Continental Continuous Flow Fuel Injection System (Cessna Training)

CAREER SUMMARY:
Ability to travel including nights, weekends and holidays.
Ability to work effectively in a team environment to achieve corporate goals.
Ability to work under minimal supervision and make tough decisions.
Strong communication skills and proficient computer skills.
Ability to multi task, analytical abilities and problem solving skills.
Customer orientation and strong work ethic.

REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7051)

Go to Search Parameters...

Brief Description

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

Offshore Rig Safety & Training Coordinator.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out