Resume - Work experience involved twenty-five years as a petroleum engineer for fossil e...

Misco Jobs

Resume #1853

CONTACT INFORMATION:
View contact information...

Education

B.S. Petroleum Engineering, University of Wyoming, 1974

Work Experience and Skills Summary

Work experience involved over twenty-five years as a petroleum engineer
for laboratory and field applications of enhanced fossil energy research,
coal bed methane recovery, and environmental remediation. This work
involved the design, construction supervision, field operation monitoring,
and data analysis of pilot and field operations for tar sand, coal bed methane,
and aquifer remediation projects. These projects involved insitu combustion,
steam and water flooding, carbon dioxide injection and polymer flooding.

Field project tasks involved shallow well drilling and completion, injection
and production equipment design and installation, oil treatment, off gas
disposal, water cleanup system design, and data acquisition installation.

Additional tasks involved conducting reservoir analysis and characterizations
to determine oil-in-place estimates for tar sand and enhanced oil recovery
projects and contaminated aquifer remediation. This work involved evaluating
core and log data and injection and production data and then using the information
to conduct computer simulations and determine process performance evaluations.

Professional employment experience include project design and implementation,
project monitoring, coordination, and evaluation. Additional skills include
report preparation with Microsoft Word or Word Perfect software, engineering
design drawing preparation with Cadd software, contouring and isopach map
preparation both by hand and with computer software such as Surfer, and data
base development and maintenance primarily with Microsoft Excel or Quattro Pro
software.

Professional Job Experience

U.S. Forest Service
Encampment and Newcastle, Wyoming
Forestry/Engineering Technician

1969-1975

While attending college, I worked summers and occasionally the fall semester
for the Forest Service. Tasks included surveying, instrument operator, and
crew leader. Projects included laying out logging roads, shooting centerline,
running cross sections and elevations, slope staking, and data recording. Survey
data were also obtained for campground mapping. In addition to the engineering
tasks, forestry tasks included, timber cruising, marking, thinning, and fighting
forest fires.

Laramie Energy Research Center
Laramie, Wyoming
Petroleum Research Engineer

1975-1977

Primary responsibilities included conducting laboratory core analyses and performing
tasks for the conduct of two tar sand in-situ combustion field projects. Specific
tasks included designing and supervising drilling, coring, casing, cementing and
well workover operations. Other tasks included designing and supervising the
installation of piping and equipment. During test operation, tasks included field
operation monitoring, and geological and operational data analysis.

Laramie Energy Technology Center
Laramie, Wyoming
Petroleum Research Engineer

1977-1981

Primary responsibilities included the completion of the second tar sand in-situ
combustion field experiment and the conduct of a tar sand steamflood experiment.
Specific tasks included the continuation of design and supervision of field
operations; design and installation of injection and production equipment;
oil/water separation and oil treatment, off gas disposal, and data acquisition
installation; and data analysis, interpretation and reporting.

Laramie Energy Technology Center
Laramie, Wyoming
Tar Sand Field Project Supervisor

1981-1983

Primary responsibilities included the overall preparation for a fourth in-situ
tar sand field experiment. Specific tasks included supervising geologists and
field personnel; completing a project design and a modeling simulation program;
procurement of all equipment, scheduling, contract preparation and monitoring;
and geologic and data interpretation.

After the completion of the field experiments, specific tasks included evaluating
core and log data, and evaluating injection, production and temperature data, and
then using the information to conduct computer simulations to determine process
performance.

In addition, another task involved the detailed reservoir analysis and characterization
of the Sunnyside, Uvalde and Santa Rosa tar sand deposits for the Synfuels Corporation.
This work included evaluating geologic data to determine oil-in-place estimates and
evaluation of proposed oil recovery techniques for the tar sand deposits.

Western Research Institute
Laramie, Wyoming
Research Engineer/Senior Engineer

1983-1985

Responsibilities included the conduct of laboratory and pilot scale experiments
to evaluate oil shale compaction and retorting, and underground coal gasification
(UCG). Specific tasks included the design, implementation, operation and evaluation
of oil shale compaction experiments, horizontal and vertical oil shale retorting
experiments, and coal gasification experiments.

1985-1990

Responsibilities included assisting the program manager in the development of a
hot-oil surface technique for processing oil shale and tar sand. Specific tasks
included equipment and instrumentation design, procurement, and installation;
experimental operation; and test evaluation and reporting. Another task involved
the design, component procurement, supervision of the construction, and testing
of a high temperature pyrolysis, two-inch, twin-screw conveyor system. This
system was the prototype for future screw conveyor systems used for high temperature
pyrolysis studies.

In addition to the engineering efforts, another effort involved assisting with
program management. Scheduling, budget and milestone tracking, research planning
and report preparation were specific tasks.

1990-2000

During this time period, the development of an in-situ contaminated aquifer remediation
process was a major undertaking. Laboratory and two field demonstrations were completed
and one field test is still in operation. Specific tasks included site characterization,
organic contamination-in-place determinations and process modeling; test pattern design;
piping and well completions; water cleanup system design; procurement and supervision of
piping and equipment installation; and operation monitoring, data analysis, interpretation
and reporting. In support of this effort, two data acquisition and control systems were
designed, components were procured and installed, and the systems operated satisfactorily
during the conduct of these field demonstrations. Marketing and process promotion were
additional efforts.

Another area of involvement included a field demonstration of carbon dioxide injection to
enhance coal bed methane production for Amoco. Specific tasks included piping design,
equipment and instrumentation design, data analysis and interpretation, and presentation
of results.

Finally, two Wyoming reservoir analyses were undertaken to determine oil-in-place estimates
to determine if the reservoirs were candidates for polymer and added-value projects.
Specific tasks involved reviewing production data, analyzing core and log data, and
performing volumetric calculations.

1982-2003

In addition to working as an engineer I have also operated the family ranch located in the
Niobrara/Goshen County region. Operating the ranch has required skills varying from financial
management to equipment maintenance. I resigned from WRI in 2001 because I could no longer work
two jobs and the weather was particularly severe that year. Since that time we have been
restructuring the ranching operation to allow me to go back to work if suitable employment
became available.

Publications

More than twenty technical publications and presentations have been authored or coauthored.
Major technical publications are listed.

Johnson Jr., L.A., L.J. Fahy, L.R. Romanowski, R.V. Barbour, and K.P. Thomas,
February 1980, "An Echoing In-Situ Combustion Oil Recovery Project in a Utah
Tar Sand", Journal of Petroleum Engineering, Vol. 32, No. 2, pp. 295-305.

Johnson Jr., L.A., L.J. Fahy, L.R. Romanowski, K.P. Thomas, and H.L. Hutchinson,
May 1982, "An Evaluation of a Steamflood Experiment in a Utah Tar Sand Deposit",
Journal of Petroleum Engineering, Vol. 34, No. 5, pp. 1119-1126.

Fahy, L.J., C.G. Mones, and N.W. Merriam, May 1983, "Northwest Asphalt Ridge Tar
Sand Deposit Well Logging and Coring Comparison", Synthetic Fuels From Oil
Shale and Tar Sands Symposium, Louisville, Kentucky, pp. 343-388.

Lasaki, G.O., R. Martel, and L.J. Fahy, April 1985, "Numerical Simulation of Combined
Reverse Combustion and Steamflooding for Oil Recovery in a Utah Tar Sand",
Society of Petroleum Engineering Journal, Vol. 25, No. 2, pp. 227-234.

Fahy, L.J., L.A. Johnson Jr., and D.A. Thingvold, June/July 1999, "In Situ Wood
Treatment Site Remediation", Soil and Groundwater Cleanup Magazine, pp. 7-9.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 6635)

Go to Search Parameters...

Brief Description

Qualified safety professional with proven national and international track record, demonstrated, through a successful 11-year safety and health management career, his ability to lead poorly performing facilities to top quartile performance.

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I have 23 years experience of Siemence steam Turbine & generator, Mitsui Steam turbine & generator, Ebara Pumps ,B&W boiler, Desalination Unit Inspection , Condition monitoring,Overhauling,Preventive Maintenance, work.

API 510 vessel inspector

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Reservoir engineering, development plan and management of upstream projects.Exceptional communication & interpersonal skills,In depth experience, in strategic planning, identifying new opportunities, execution of business plan, managing policies, problem solving, motivation and training,

I am having experience in Both static & rotating equipments

Instrumentation / Control system engineer

BE Chemical

I have 15 years of overseas experience in safety, fire prevention, IH and operations engineering. I am very flexible, a self starter, I work well in multi-cultural environments and have excellent problem solving abilities.

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

I am interested in a position in the EHS field. I have a degree from University of Findlay

My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.

Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.

Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.

Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.

A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.

Wide ranging petroleum engineer with successful record in reservoir development planning/management, 17 years: BHP, PGS, BP, Agip, Burlington, Phillips, Marathon, UT Austin(1982-85), NL Baroid, international experience in Nigeria, Kuwait, Egypt, Angola, Norway, Algeria, Syria, NorthSea

Cost Engineer with gas pipeline & oilfield production background also some power plant and mining background.

Having completed my service at the age of 60 in Sept, 2000, I still want to live a busy life. Earn and live a better living exploiting 36 years of my experience in oil well drilling industry.

International Experience Superior Client Performance Evaluation

1. Project Manager for the engineering, procurement, construction and installation of Substructures (Jackets), Topsides, and Gas Compression Modules, FPSOs, Submarine Pipelines, Submarine Cables, Mooring Buoys and PLEMs ¨C Offshore Oil and Gas Industry.

Testing of sample

I have over ten years experience in oil industry for reserve reporting maintaing and updating reserve syste. Inmost recent job iI provide onsite technical support and training to geoscience professionals in major oil& gas companies.

Hazard and risk assessment, emergency procedures, preparing HSE plans, mock drills, HSE inspections and audits

Having around 11½ years of Experience in Instrumentation & Process control in various continuous process industries. [ Chemical ( 4 Years ), Petrochemical (1½ years ) & fertilizer ( 4 Years ), KNPC Shuaiba Refinery, Kuwait (1½ years)].Engineering Graduate.

Reservoir engineer software developer

Pipeline Engineer having 8 years experience in detailed and construction engineering of submarine pipelines

Preparing FEED deliverables: Process Flow diagrams, P & IDs, heat & material balance table, process equipment data sheets Generation: heat exchangers, pumps, air fin fans, instrument data sheets, Control valve Sizing calculation,

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

All aspects of seismic data processing - signal processing, velocity modeling, migration

Sr. Production Geologist / Team Leader, New Oil

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

Corrosion Engineering consultant

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinery production supervisor, oil terminal incharege etc. I worked on various International companies.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out