Resume - Process Engineer in Oil & Gas Consultancy.

Misco Jobs

Resume #18555

CONTACT INFORMATION:
View contact information...

Over 16 years of experience in the Oil & Gas Industry (both upstream and downstream).

Worked on several onshore and offshore projects. Projects handled include Gas Processing comprising mercury removal, sweetening, dehydration, LPG & C2-C3 recovery, Gas Compression for export / injection, Oil & Gas Wellhead Platforms, Water Treatment & Injection, Oil processing comprising stabilisation & Desalting, Condensate Fractionation & Kerosene recovery, Refrigeration, Utilities & Offsites storage & loading systems.

Experience of handling feasibility studies, basic engineering and EPC projects. Experience of leading a multi-discipline team. Highly motivated, hard working, innovative and pro-active in approach. A good team player. Good analytical mind.

AREAS OF EXPERTISE INCLUDE:
- Conceptualization, Simulation and Optimization of process flow schemes
- Basic Engineering which includes pipeline hydraulics & process modeling, preparation of the heat and material balance, developing PFDs and P&IDs, finalization of instrumentation, operation and commissioning philosophy, control & shutdown philosophy, tie-in & shutdown philosophy, developing the PSFS and safeguarding memorandum, equipment sizing, control / safety valve sizing, flow orifice sizing, hydraulic calculations, Shutdown Cause & Effect Matrix, Hazardous Area Classification drawings
- HAZOP Studies
- Techno-economic Feasibility Studies
- Preparation of Technical Specs, Bid Evaluation, review of vendor documents
- Revamp Study for capacity augmentation and de-bottlenecking which includes adequacy checks of equipment, instruments and piping
- Designs Reviews
- Detailed Engineering Follow-up up to commissioning / start-up; technical writer of Operating, Commissioning & Startup Manuals
- Proposals for Basic and Detailed engineering

Also participated in design reviews such as SIL, value engineering, HSEIA, constructability.

Used extensively process simulators HYSIS, PRO-II & Pipesim. Also used dynamic simulator OLGA. Conversant with international standards and codes, company practices such as Shell DEPs, BP standards, TOTAL standards.

MAJOR ACHIEVEMENTS
- Identification of causes of hydrocarbon liquid carryover / foaming in sweetening columns as part of the ADGAS LNG HP feed gas conditioning study. Proposed solution is under implementation by the client (which potentially can save significant revenue by achieving higher LNG thruput).
- Design review of ADCO's BuHasa Facilities Upgrade Project during the EPC tendering phase led to recognition of design deficiencies - subsequently re-engineered by the client.
- All the projects handled in Technip have been completed within the allocated budget and time frame.
- Successful implementation of EPC - Champion Oil & Gas De-bottlenecking project for Brunei Shell – executed together with Brown and Root, Singapore. Involved right from basic engineering to start-up.

NATIONALITY
Indian

QUALIFICATION
B. Tech in Chemical Engineering, I.I.T. Bombay, 1988

EMPLOYMENT HISTORY
May '2000 – Present Technip, Abu Dhabi
Position Lead / Senior Process Engineer

PMC for EPC of Mellitah plant, Western Libya Gas Project of AGIP, Italy - The project includes a new gas processing complex comprising Slug Catcher, Gas Sweetening, Gas Dehydration, Gas Dew Point Control, Condensate Stabilisation & NGL Fractionation, and utility systems. Involved as part of the PMC team based in Milan, Italy in the review / approval of contractor (Snamprogetti) design / documents such as PFDs, P&IDs, Heat & Material Balance, Equipment specifications, instrument data sheets.

Basic Engineering for new refrigerated LPG / Propane Tanks for QP. Project involved new propane storage tanks, conversion of existing propane tanks into butane storage tanks, new Boil-off Compressor, and associated works. Performed simulations for estimation of boil-off loads and for refrigeration system, worked out boil-off gas compressor configuration, involved in preparation of PFDs and P&IDs.

Basic Engineering for Bu Hasa 'G' & 'F+D' Development Project of ADCO. Project involved new gas and water injection facilities. Included new high pressure gas compression system (about 400 bar), associated utility systems, flare system, new water injection clusters, gas and water injection pipeline networks and gas, water and WAG (water-alternating gas) injection wellheads. Also involved in value engineering, reliability/availability study. Responsibility - Lead Process Engineer.

Basic Engineering for Filtration Upgrade of LNG trains of ADGAS – Included providing new filtration systems for carbonate and DEA solvents in LNG sweetening trains as means of reducing foaming problems in absorber columns. Responsibility - Lead Process Engineer

Techno-Economic Feasibility study followed by Basic Engineering for LNG plant HP feed gas conditioning – ADGAS - Included troubleshooting of existing sweetening trains – identification of causes of foaming, developing various options aimed at eliminating foaming problems, and techno-economic analysis of the options. Prepared techno-economic feasibility report. Made several presentations to high-level management on the findings / solutions proposed. Responsibility - Lead Process Engineer

EPC for Asab Facilities Upgrade Project for ADCO - Included new 30" multi-phase pipeline and effluent water disposal facility upgrade. Performed dynamic simulation of the pipeline for slug analysis using dynamic simulator OLGA. Prepared Commissioning / Operating Manuals, Pipeline de-watering procedure, pipeline de-oiling procedure. Responsibility – Lead Process Engineer

Proposal for Bu Hasa Facilities Upgrade EPC Project of ADCO. The project involves new centralised crude stabilisation facilities at Bu Hasa CDS. Included new 4-stage crude stabilisation facility, crude desalting, low pressure-gas recovery and various new utility systems and flare systems. Involved in FEED verification / endorsement, preliminary process calculations, interaction with desalter vendors, etc. Of particular interest was multi-phase distribution concept proposed in the FEED and the tight water-in oil spec desired by the client. Prepared / presented a proposed Construction / Tie-in & Shutdown plan with a view to minimize loss of production during construction phase. Responsibility – Lead Proposal Engineer

May '96 – April 2000 BAEC, Brunei (Design Consultants to Brunei Shell Petroleum & Brunei LNG)
Position Lead / Senior Process Engineer

Basic and Detailed Engineering (as part of EPIC project executed by Brown & Root Singapore) of the Champion Oil & Gas Debottlenecking Project which included new Gas Dehydration Unit for Champion 7 complex and new centralized liquid stabilization facilities for Champion field. Involved in simulation of the process flow scheme, preparation of the technical specs for the Glycol Contactor and the Glycol Regeneration skid, Liquid Export Pumps, Flash Gas Compressor (Liquid ring / Screw type), Instrument Air System, HAZOP study, developing of the PFS, P&ID'S, PSFS, Safeguarding Memorandum and the HAC drawings, updating the Shutdown Cause & Effect Matrix, developing Operations and Commissioning Philosophy for the entire Champion field, technical evaluation of various pump & compressor bids. Responsible for preparing the Commissioning, Startup & Operating Manuals. Worked as Lead Process and also as Project Engineer.

Basic and Detailed Engineering of the Gas Dehydration Unit for Champion 3 Intermediate / Deep Gas Dev. Project. Involved in HAZOP, bid evaluation of the Glycol Unit, developing PFS, P&ID'S and PSFS. Responsible in preparing the Operating & Commissioning Manuals, and also commissioning support to Shell.

July '88 – April '96 Engineers India Limited, New Delhi, India
Position Senior Process Engineer

Basic Engineering of Gas Wellhead Platform, BE, of the South Bassein field in Bombay Offshore. The field is the only major gas-producing field in India. The work included design of topside facilities for sour gas handling and in-field gas well fluid network.

Basic / Detailed Engineering for LPG Recovery Unit, Lakwa. It involved LPG extraction from C3-C4 rich gas through the expander-compressor route. As a Lead Process Engineer, responsible for flowsheet simulation and optimization and process design.

Study Report for revamp of Gas Sweetening and Dehydration units, Hazira. The complex has 4 trains of MDEA (SNEA license) based sweetening units and TEG based dehydration units. The job involved review of equipment, instruments and hydraulics for higher capacity. The findings were later confirmed by a test run.

Study Report for Additional LPG Recovery Facilities, Vijaipur, GAIL. This involved revamp of existing LPG / Propane Recovery Units. The process used is a combination of expander - compressor and external refrigeration processes. The work involved flowsheet simulations for various revamp schemes and adequacy check of equipment. The external refrigeration and the hot water systems (comprising waste heat recovery associated with gas turbines of lean gas compressors) were reviewed for spare capacity and propane recovery maximized.

Basic Engineering of Oil Wellhead Platforms, NLM-5/6/8/9/10/11, in the Neelam Field of Bombay Offshore. Subsequently involved in review and approval of detail design documents.

Basic / Detailed Engineering for Crude Stabilization Unit, Ravva Phase-1. The job involved flowsheet simulation and optimization for oil stabilization, generating process specs for 3-phase separators, oil storage, chemical injection system, flare system and hot oil system.

Deputed to KTI BV from May 1995 to October 1995 for review of the Basic Engineering package of 'C4 Hydrogenation Unit' by IFP and the 'Spent Caustic Oxidation Unit' by ABB Lummus for the NOCIL Modernization Project. The C4 Hydrogenation Unit comprises two-stage catalytic hydrogenation of olefins obtained from the Naphtha Cracker. The Spent Caustic Oxidation Unit comprises oxidation and neutralization of the spent caustic obtained from the Caustic Wash Unit.

Deputed to MMC Oil & Gas Engineering, Malaysia, from August 1992 – October 1992, for detailed engineering of a Water Injection platform for Petronas Carigali. The work included preparation of package unit specs (for Sea Water Lift pumps, Coarse and Fine Filters, Deaeration Tower, Chlorinator, etc.), developing P&IDs, safety logic and preparation of the process package.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 6519)

Go to Search Parameters...

Brief Description

Experienced, geotechnical engineer / exploration geophysicist

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

Professional DCS expert with 8 Years experience in process automation projects for pharma, oil & gas sector, Lead engineering and Project Engineering experience.

Mud engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out