Resume - Engineering executive with over 11 years of intl exp, in the positions of increa...

Misco Jobs

Resume #18676

CONTACT INFORMATION:
View contact information...

SUMMARY
Engineering executive with over 11 years of international experience, in the positions of increasing responsibility in major internationally renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines and budgets on major projects resulting in bottom line savings. Fully capable of effective management of large corporate engineering function in delivering the concept through commissioning i.e., conceptual design, Engineering, Procurement, Construction and Commissioning.

SUMMARY OF ACCOMPLISHMENTS
Engineering Management
- Planned, directed, and coordinated activities of designated projects.
- Ensured that aims, goals, and objectives were accomplished in accordance with outlined priorities, time limitations, and funding conditions.
- Analyzed results of operations for substantial gains and more efficient utilization of resources.
- Developed staffing plans, work schedules, budgets, and time lines.
- Coordinated the successful simultaneous development of several projects.
- Negotiated contracts that ensured quality and met standards.
- Recruited or requested assignment of personnel.
- Reviewed project reports and schedule status at each phase.

Project Savings
- Completed supply of Wellcom Boost Systems Project for Exxon Mobil (Malaysia) within the stipulated time with savings about 40% of the Project Value
- Delivered Product Air fin Coolers Project to Sarawak Shell ( Malaysia ) one month early with savings estimated approximately 50% of the total Project Cost
- Completed all project assignments ahead of schedule and under the budget.

Technologies
- Study, Propose, Design, Engineering, Procurement, Construction, and Commissioning of Wellcom Boost systems (Technology for Enhanced Oil recovery (EOR) from Low / Marginal Oil & Gas fields). - Both onshore & off shore work.
- Supply, Fabrication, Onshore testing and delivery of Product Air Coolers - Both Onshore & Off shore works.
- Tender Preparation and Costing, preparation of bill of quantity estimates, tender finalization, Award of work to Contractor, site post Contract administration, Project cost control, Supervision of Works. For Mechanical works of super specialty hospital.
- Installation Equipment and associated Low side works like Fabrication, Erection & Testing of Low side works of HVAC for Power plants.
- Supply and install various mechanical static / rotating equipment for Petroleum refinery along with the Supply, Fabrication, Erection of associated Piping and structural supports.

WORK HISTORY
Sep 2002 to Present EP Engineering Sdn Bhd
- MalaysiaProject Manager

Dec - 2001 to Aug - 2002 Hamon (M) Sdn Bhd - Malaysia
Project Manager

July - 2000 to Oct – 2001 Prathuysha Children Hospital, India
Project Consultant

Feb - 1999 to June – 2000 M/s Hyundai Engineering & Construction Company – Kuwait
HVAC Engineer

Dec - 1993 to Jan - 1999 Taikisha Engineering India Pvt Ltd - India
Assistant Manager (Projects) (May - 1996 To Jan - 1999)
Project Engineer (Dec - 1993 To Apr - 1996)

EDUCATION
B.Tech., Nagarjuna University, 1993
Major: Mechanical Engineering

TRAININGS
- Basic offshore safety, sea survival &
- Helicopter under water escape training
- Basic Fire Fighting
- First Aid CPR / EAR
- Management of systems for better quality
- Enhancing Productivity and imparting best ethics for the employee

COMPUTER SKILLS
- Microsoft Office - 2000
- Auto CAD - 14, 2000
- Microsoft Project
- Micro Station - 95

PERSONAL
Age 36
Married, 2 Children
Indian Citizen
Excellent Health

REFERENCES
Excellent business and personal references available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6519)

Go to Search Parameters...

Brief Description

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Surveyor-Photogrammetrist

30 years old and graduated from The University of Muhammadiyah Surakarta (U.M.S) – major in civil engineering. I am still employed with PT. Technip Indonesia.

Piping (Materials & Specification) Engineer

MBA / Instrumentation Engineer with 3 Years of Experience in PLC & SCADA Programming ; Project Management ; Business Development

RELIABILITY TECHNICIAN FOR INSTRUMENT AND CONTROL

B. Tech (Electrical/Electronics Engr.) + 6yrs working experience in oil and gas company.

Highly motivated engineer seeking for opportunities in the Oil and Gas industry

6 years experience on OCTG manufacturing and Qualification 4 years bachelor Degree in Mechanical and Production Engineering

I have a degree in Applied Chemistry( Chemical Technologist) with 6+ years of experience in Analytical Laboratory ,Quality control, Chemical processing engineering in oil company .My skills are Chemical testing & Analysis, Basic lab techniques & Standard procedures, Development and process validatio

I have graduated from University of Calgary. I have 3 years experience in P.O.G.C. (Asaluye) as Reservoir Engineer.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Master of Science in Petroleum Egineering , Bachelor of Engineering in Petroleum Engineering

CAPABILITY THERE BY CONSIDERING THE QUALITY IMPLICATIONS OF ALL WORKS UNDERTAKEN BY RECOMMENDING ACTIONS RESPECT TO THE PROJECT SCHEDULE AND ACCEPTANCE ENGINEERING PRACTICE THERE BY MAINTAINING UNINTERRUPTED PRODUCTION WITH QUALITY AND STANDARD

Procurement & Supply Chain

A position of dynamic and energetic person to work as a "Process Engineer" with growth, potential and challenging environment to utilize my strong interpersonal abilities and technical skills for achievement of organization wellbeing.

Seismic Acquisition design and Seismic Acquisition Field Supervisor.

•Extensive hands-on, good knowledge and 4years solid working experience in Project management ,calibration, testing, design, application, installation, repair, troubleshooting and commissioning for wide-range of Electrical, instrumentation and controls of FPSO, oil and gas, petrochemicals, pharmace

Senior Geophysicist with 8 years experience in E&P company, solid background in structural and petroleum geology. Experienced in prospect generation and evaluation, total command over Windows Office suite (Word, Excel, Power point), fluent in English and Arabic.

More than three years of experience in start-up and operation of PET resin and polyester yarn plant as an Instrumentation Engineer. Hands on experience in Fisher Rosemount Delta V DCS and plant instrumentation and controls.

Sr.pds piping designer with 11 years in layout and detaling work.

Supervisor and leader of Electrical and Telecommunication department activities in engineering, procurement and construction services in OIEC group

Experience of Design of material handling equipments, Pipe & flow analysis, Corrosion Engineering, Mechanical software like Inventor,Autocad,Catia

I amMsc Electronics ,Good Computer Hard ware& Software Knowledge,DCS , PLC & Field Instrumentation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out