Resume - Sr. Instrument Technician

Misco Jobs

Resume #19407

CONTACT INFORMATION:
View contact information...

Application for the post of Sr.INSTRUMENT TECHNICIAN

OBJECTIVE: Work as a team for better future of the Company

EDUCATION:
* Secondary School Certificate (SSC) from Government of Gujarat
* July'1988 to September' 1990 passed Industrial Training Institute
* Passed out November'1996 National Council Trade Vocational Training (IMCP) through Gujarat State Fertilizer Company Ltd. (Govt. of India Approved)

Total Experience: 15years

EXPERIENCE:
July 1997 to Onwards Kuwait National Petroleum Company of Mina Abdullah Refinery, Kuwait through Instrument Installation and Maintenance Co. (IMCO)
INSTRUMENT TECHNICIAN

* Conversant and Hands experience on Honeywell's TDC-3000 for Data Acquisition, Regulatory Control and Sequence Event Recording and the Shutdown system SSD-2000 (ICS) England.
* Responsible for Preventive / Corrective Maintenance of Process Instrument and Shutdown system SSD-2000 (ICS) Fully familiar with running Plant Problems, Trouble Shooting, Routing Maintenance, Shutdown Jobs and Modification Jobs on Heater New Loop wiring had done on shutdown system panel SSD- 2000
* Confident of Commissioning during shutdowns activities such as Installation Loop and Commissioning of Electronics / Pneumatic Instrument in Mina Abdullah Refinery during Augest'1998 General Refinery Turnaround (GRT)

* Instrument Activities like New Loops on ICS panel wiring loops checking and Commissioning of Electronics / Pneumatics Instruments

* TDC-2000/3000(Honeywell)Distributed Control System fully conversant with slot linkage diagram, point tag configuration, selection of subsystem Input and Out put modules

* Allen Bradley and Siemens–Programmable logic controller (SLC-500 and S7- 200)

* Warehouse Material Management System (MMS) and Maximo Multi Access Computing a Material Transaction Processing system. (Item inquiries, Purchase Order Inquiries, Vendor Information)

* Now new Warehouse system for three Refineries (Maximo) our link through networks preparing daily Time sheet, Desktop for Requisition, Queries items

* Some units such a (ARDS / VACCUM Units) up gradation of High Performance Process Module (HPM) Honeywell Co. HPM panel wiring fields loop testing and commissioning under supervisor of Honeywell Co. Engineers

* Fully Conversant calibration on various makes of Pneumatic / Electronic process field / panel instruments such as (Pressure, Level, Flow, Measurement, Direct and Indirect level Measurement) Troubleshooting Relay interlocking panel and Shutdown gate logic system, Control valve, Leveltrolls, Switches, Transmitters, I / P and P / I converters, Indicators, Controllers, Positioners, Solenoid valves, lockup relays, RTD's, Thermocouple, Bentley Nevada series 7200 i.e. vibration Probes Axial Displacement probes.

Achivements:
Mina Abdullah Refinery (KNPC) Kuwait was assigned for the following projects:
- EDMS (Electronics Document Management System) in the instrument maintenance dept. Window NT 4.0 server and 13 Window NT workstation interconnected by the HDSL Network Running Software "Rebries Plantlife Access" packages
- All instruments Tag is registered in the system and can assigned each tag associated with particular document information
- Handle Expansions of ARDS unit with LG Korea and commission system Online Catalyst Replacement (OCR) with fully Automation

October'1996 to July'1997 Nitro Aromatics (A division of Deepak Nitrite Ltd.)
INSTRUMENT TECHNICIAN
* Conversant and Hands Experience on DCS Foxboro (I / A series) Intelligent and Automation series and Bells 761 series controller with its configuration

* Here I closely related calibration, installation and troubleshooting of Magnetic Flow Transmitter make Krohne Mrshall, Foxboro and Rosemount

* Here I worked on various types of field instruments like Pressure, Temperature, Level and Flow using in hazardous chemical Plant

October'1993 to October'1996 Gujarat State Fertilizer Company
TRAINEE INSTRUMENT TECHNICIAN
* Here I got intensive trade training of "INSTRUMENT MECHNIC" (Chemical Plant) in Fertilizer & power Plants like name Capro Lactom, Phosphetic Group, Acid Group (H2SO4), Co- Generation and Utility plants instrumentation and their related Maintenance, Testing, Installation and Calibration

* I worked with Unit Engineers and Yokogawa Eng. On DCS of Yokogawa Centum – XL for New Capro Lactum plant. Also I got intensive training of Construction activities of Field instruments calibration, tubing, installation and wiring up to marshalling racks. Troubleshooting while commissioning plant and their instruments

September'1990 to October'1996 Consolidated Petrotech Industries Ltd.
INSTRUMENT TECHNICIAN
* Here I worked at Petrochemical plant (MEK division) using Germany Technology for plant process.

* I worked on Taylor MOD30 Controller (Microprocessor Base) with configuration, wiring and adjust / feed all Data (Parameters) for Level, Temperature, Pressure, and Flow. Individual shift Technician and Call out shift Technician also during shift authorized for permits issuing and closing under industrial safety rules

Equipment Handle: Various type Calibration equipment handled are Budgenberg Dead Weight Tester, Pneumatic / Electronic Calibrator like Rosemount (262 model), Unomat, Altek, Ecom, Fluke multimeter and HART communicator for smart Transmitters.

SHE TRAINING:
* Attended the Safety Course regarding basic and application of safety in petroleum refinery of Operation and Maintenance personnel
* Conduct by loss prevention department of Kuwait National Petroleum Company of Mina Abdullah Refinery

INTEREST:
* I have good knowledge about Computer Hardware like Assembling, Repairing, Formatting and Downloading all type of software, Hardware Driver and Windows '95, '98, '2000 and 'Xp Professional
* Playing games like indoor chess and out door Cricket etc.

Bases on my working experience I request to you give me an opportunity to prove my ability.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6635)

Go to Search Parameters...

Brief Description

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Electrical Engineer

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems

Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard

2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor

I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.

qualiy inspection

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.

Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.

Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.

TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Drilling Supervisor / Engineer 5+ years experience with HTHP wells.

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Surveyor-Photogrammetrist

30 years old and graduated from The University of Muhammadiyah Surakarta (U.M.S) – major in civil engineering. I am still employed with PT. Technip Indonesia.

Piping (Materials & Specification) Engineer

MBA / Instrumentation Engineer with 3 Years of Experience in PLC & SCADA Programming ; Project Management ; Business Development

RELIABILITY TECHNICIAN FOR INSTRUMENT AND CONTROL

B. Tech (Electrical/Electronics Engr.) + 6yrs working experience in oil and gas company.

Highly motivated engineer seeking for opportunities in the Oil and Gas industry

6 years experience on OCTG manufacturing and Qualification 4 years bachelor Degree in Mechanical and Production Engineering

I have a degree in Applied Chemistry( Chemical Technologist) with 6+ years of experience in Analytical Laboratory ,Quality control, Chemical processing engineering in oil company .My skills are Chemical testing & Analysis, Basic lab techniques & Standard procedures, Development and process validatio

I have graduated from University of Calgary. I have 3 years experience in P.O.G.C. (Asaluye) as Reservoir Engineer.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out