Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #19925 next resume »»
CONTACT INFORMATION:
View contact information...

QUALIFICATIONS
1987 PhD Petroleum Engineering, University of Tulsa, OK, USA
1984 MSc Petroleum Engineering, University of Tulsa, OK, USA
1979 BSc Geophysics Engineering, Nat. University of Mexico, Mexico

KEY COMPETENCIES
* 20 years of experience in well test analysis and interpretation methods of production data.
* Development of well test analysis techniques based on new analytical solutions and specialized plots.
* Development analysis techniques of production data to estimate reserves and formation properties.
* Specialist skills in well performance prediction for both single-phase and multiphase systems.
* Confident leader and mentor.
* Outcome focused.
* Multilingual: English and Spanish.

WORK HISTORY
2002 – PRESENT
PEMEX, MEXICO
MANAGER OF TECHNOLOGY DEVELOPMENT IN E&P

Responsibilities include:
* Monitor technology applications currently being practised for exploration and production.
* Support assets in the identification of areas for improvement, and propose them the introduction of new technology application opportunities.
* Member of multidisciplinary review group charged with evaluation of all technology development projects in E&P and making recommendations for development or divestment.

2000 – 2002
PEMEX E&P, VILLAHERMOSA, MEXICO
MANAGER OF WELL PRODUCTIVITY

Responsibilities included:
* Monitor technology applications currently being practised for well productivity and reservoir surveillance/management.
* Support assets in the identification of areas for improvement, and propose them the introduction of new technology application opportunities in the topic of well productivity.
* Member of multidisciplinary review group charged with evaluation of all technology development projects in well productivity, reservoir characterization, modelling and simulation, hydrocarbon resource evaluation and reserves estimation, production optimization, and reservoir engineering, and making recommendations for development or divestment.
* Lead the formulation of mentoring and training program in the area of well productivity with the objective of improving their competencies.

1992 – 1999
NATIONAL UNIVERSITY OF MEXICO / PEMEX E&P, MEXICO
HEAD OF PETROLEUM DEPARTMENT AND FULL TIME PROFESSOR

Responsibilities included:
* Initiate, guide and advise work on research and development on reservoir characterization, modelling and simulation, hydrocarbon resource evaluation and reserves estimation, production optimization, and reservoir engineering.
* Authored numerous technical papers for internal and external publications.
* Conducted research projects supported by Pemex E&P on well testing and production decline analysis for both single-phase and multiphase flow systems.
* Teaching courses on Well Testing, Technical Mathematics, and Multiphase Flow in Pipes, in the Graduate Division of Petroleum Engineering.

1991 – 1992
PEMEX, MEXICO
ADVISOR

Responsibilities included:

* Advice the Planning and Coordination Vice-presidency on hydrocarbon resource evaluation, reserves estimation, and production forecasts.

1988 – 1991
MEXICAN PETROLEUM INSTITUTE, MEXICO
RESEARCHER

Responsibilities included:

* Conducted research projects supported by Pemex E&P on well testing, production decline analysis, and inflow performance relationships about naturally fractured reservoirs.
* Authored numerous technical papers for internal and external publications.

1987 – 1988
UNIVERSITY OF TULSA, USA
RESEARCH ASSOCIATE

Responsibilities included:

* Conducted research studies on well testing, production decline analysis, and inflow performance relationships, for solution gas-drive systems.
* Authored technical papers for publications.

APPENDICES

TECHNICAL PAPERS

1. C.O. Bennett, Camacho-V., R.G., A.C. Reynolds: "Approximate Solutions for Fractured Wells Producing Layered Reservoirs", Society of Petroleum Engineers Journal, October 1985.

2. Camacho-V., R.G., Raghavan, and A.C. Reynolds: "Response of Wells Producing Layered Reservoirs", SPE Formation Evaluation, March 1987.

3. Camacho-V., R.G., and R. Raghavan: "Inflow Performance Relationships for Solution Gas-Drive Reservoirs", Journal of Petroleum Technology, May 1989.

4. Camacho-V., R.G., and R. Raghavan: "Performance of Wells in Solution Gas Drive Reservoirs", SPE Formation Evaluation, December, 1989.

5. Camacho-V, R.G. and R. Raghavan: "Boundary-Dominated Flow in Solution Gas-Drive Reservoirs", SPE Reservoir Engineering, November 1989.

6. D.T. Vo, J.R. Jones, Camacho-V., R.G., and R. Raghavan, R.: "A Unified Treatment of Materials Balance Computations", Paper No. CIM/SPE 90-37. Presented in Calgary, Canada, June 1990.

7. Camacho-V., R.G., and R. Raghavan: "Some Theoretical Results useful in analyzing the Well Performance under Solution Gas Drive", SPE Formation Evaluation, June 1991.

8. Camacho-V., R.G.: "Constant Pressure Production in Solution Gas-Drive Reservoirs; Transient Flow", SPE Formation Evaluation, June 1991.

9. Camacho-V., R.G., M. González-R., and H. Cinco-L.: "Advanced Prediction Decline for Optimization of Stimulation", SPE 23578, submitted for publication.

10. Camacho-V., R.G., and M.A.Vásquez-C.: "Comment on Analytical Solution Incorporating Nonlinear Radial Flow in Confined Aquifers (by Sen)", Water Resources Research, Vol. 28, No. 12, December 1992.

11. Camacho-V., R.G., and M.A.Vásquez-C.: "Repressurization Effects Present in a Variable Bubble-point Problem Associated with Multiphase Non-Laminar Flow", presented in Seventh IMACS International Conference on Computer Methods for Partial Differential Equations, New Brunswick, New Jersey, June 22 - 24, 1992.

12. Camacho-V., R.G., R. Padilla-S., and M.Vásquez-C.: "Inflow Performance Relationships with Inertial Effects in the Reservoir", SPE 25481, presented in the Production Operations Symposium, Oklahoma, Oklahoma, March 1993.

13. Hernández-G,H., Samaniego-V.,F., Camacho-V., R.G. and Galindo-N., A.: "Gas Condensate Well Testing Under the Influence of High-Velocity Flow," SPE 26666, presented at the 1993 SPE Annual Technical Conference and Exhibition, Houston, Texas, October, 1993.

14. Herrera, I., Camacho-V., R.G. and Galindo-N., A.: Chapter VII: "Shock modelling in petroleum engineering" book: Computational Methods for Free and Moving Boundary Problems in Heat and Fluid Flow," published by L.C. Wrobel and C.A. Brebbia, Computational Mechanics Publications, 1993.

15. Camacho-V., R.G., and R. Raghavan: "Well Test Analysis in Solution Gas-Drive Systems for Naturally Fractured Reservoirs," SPE Formation Evaluation, March, 1994.

16. Roldán-C., J., Camacho-V., R.G., and Samaniego-V., F.: "Well Testing in Solution Gas-Drive Systems under Non-Laminar Flow Conditions," SPE 35344 presented at the International Petroleum Conference & Exhibition of México, Villahermosa, México, March 5-7, 1996.

17. González-G., J. and Camacho-V., R.G.: "A Horizontal Well Model Considering Multiphase Flow and the Presence of Perforations," SPE 36073, presented at the Fourth Latin American and Caribbean Petroleum Engineering Conference, Port of Spain, Trinidad and Tobago, April 23-26, 1996.

18. Vásquez-C., M., Camacho-V., R.G., and Macias-C., L.: "The Variable Rate Transient Analysis in Saturated Reservoirs," SPE 36122, presented at the Fourth Latin American and Caribbean Petroleum Engineering Conference, Port of Spain, Trinidad and Tobago, April 23-26, 1996.

19. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Padilla-S.,R., and Macias-C., L., "Transient Analysis of Variable Rate Tests for Solution Gas-Drive Reservoirs," SPE Advanced Technology Series, Volume 4, Number 1, 5-13, May 1996.

20. Camacho-V., R.G., Rodríguez, F., Galindo-N., A., and Prats, M.: "Optimum Position for Wells Producing at Constant Wellbore Pressure," SPE Journal, June 1996, Volume 1, Number 2, 155-168.

21. Camacho-V., R.G., Rodríguez, F., and Galindo-N., A.: "Use of Step Function to Solve 2-D Diffusivity Linear Problems with Wells Producing at Constant Pressure," presented in the XI International Conference on Computational Methods in Water Resources, Cancún, México, July 22-26, 1996.

22. Camacho-V., R.G., and Herrera-R., I.: "A Consistent Black-Oil Model with Variable Bubble-Point," an Invited Paper presented in the XI International Conference on Computational Methods in Water Resources, Cancún, México, July 22-26, 1996.

23. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Samaniego-V.,F., and Macias-C.,L.: "New Results on Transient Well Test Analysis Considering Non-Laminar Flow in the Reservoir," SPE Formation Evaluation, Volume 11, Number 4, 237-244, December, 1996.

24. Camacho-V., R.G., Vásquez-C.,M., Roldán-C.,J., Samaniego-V.,F., and Macias-C.,L.: " Supplement to SPE 26180, New Results on Transient Well Test Analysis Considering Non-Laminar Flow in the Reservoir," submitted for publication.

25. Prats, M., Camacho-V., R.G., and Rodríguez, F.: "One-Dimensional Linear Flow with Constant Terminal Pressures," Paper 97-32 presented in the 48th Annual Technical Meeting of the Petroleum Society, June 8-11, 1997.

26. Camacho-V., R.G.and Macias-C., L.: "Role of Training in Pemex and Relations with UNAM," poster presented in the Fourth Colloquium on Petroleum Engineering Education, Bakersfield, Colorado, July 1997.

27. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Fuentes, F., and Camacho-V., R. G.: " The Influence of Heat Transfer on the Two-Phase Flow Behavior in a Wellbore During Transient Pressure Tests," Paper SPE 39077, presented in the Fifth Latin American and Caribbean Petroleum Engineering Conference and Exhibition, Río de Janeiro, Brazil, August 30-September 3, 1997.

28. Tellez-C., G. and Camacho-V., R. G.: "Analysis of Capillary Pressure Effects on Well Tests in Solution Gas-Drive Reservoirs," Paper SPE 39898, presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

29. Granados-C., J. and Camacho-V., R. G.: "Analysis of Two-Phase Flow in Horizontal and Inclined Pipes with Mechanistic Models," Paper SPE 39857, presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

30. González-G., Galindo-N., A., Camacho-V., R. G., and Fairusov-V., Y.: "Numerical Simulator to Analyze Short Build-up Pressure Tests," Paper SPE 39892 presented in the SPE International Petroleum Conference and Exhibition of Mexico, Villahermosa, Tabasco, March 3-5, 1998.

31. Vásquez-C., M. and Camacho-V., R.G.: "Analysis of Short Pressure Transient Tests Affected by Changing Wellbore Storage," SPE Reservoir Evaluation & Engineering, 261-267, June 1998.

32. Camacho-V., R.G., M. Vásquez-C., and R. Padilla-S.: "New Results on Decline Curves Considering Non Darcy Flow Effects", SPE Reservoir Evaluation & Engineering, 457-466, October 1998.

33. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Fuentes, F., and Camacho-V., R. G.: "A Lumped-Parameter model for transient two-phase gas-liquid flow in a wellbore", SPE Production & Facilities, February, 1999.

34. González-T., F., Camacho-V., R.G., and Escalante-R., B.: "Truncation Denoising in Transient Pressure Tests," Paper SPE 56422, presented in the 1999 SPE Annual Technical Conference and Exhibition, Houston, Texas, October 3-6.

35. Prats, M., Camacho-V., R.G., and Rodríguez, F.: "One-Dimensional Linear Flow with Constant Terminal Pressures," Journal of Canadian Petroleum Technology, Vol. 38, No. 13, 1999.

36. Padilla-S., R., Camacho-V., R.G., Castrejón-A., R., and Samaniego-V., F.: "Inflow Performance Relationships under Gravity Segregation for Solution Gas-Drive Reservoirs," Paper presented in the OMAE-2000 and ETCE-2000, New Orleans, February, 2000.

37. Sampayo-T., A. and Camacho-V., R.G.: "Influence of Non-uniform Initial Pressure Distribution in Well Test Data," Paper SPE 59012 presented in the International Petroleum Conference and Exhibition in Mexico, February 1-3, 2000.

38. Pulido-B., Héctor, Rivera-R., Jesús, Samaniego-V.,F., y Camacho-V., R.G.: "Double Porosity Model with Transient Interporosity Flow and Interpretation of the Response of Tracer Radioactivity in Naturally Fractured Reservoirs," presented in GEOQUEST Forum 2000.

39. Rivas-G., S., González-G., J., Cruz-H., J., Galindo-N., A., Camacho-V., R.G., Islas-J., R., and Pineda-M., A.: "Numerical Simulation of Oil Displacement by Water in a Vuggy Fractured Porous Medium," SPE 66386 presented in the SPE Reservoir Simulation Symposium, Houston, Texas, February 11-14, 2001.

40. Domínguez-V., G., and Camacho-V., R.G.: "Technology Development at PEMEX: "Detecting Research and Technology Development Needs in a National Oil Company"," Paper 72499 presented in the 2001 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 30 September to 3 October, 2001.

41. Domínguez-V., G., and Camacho-V., R.G.: "Continuing Education Needs in PEMEX Exploration and Production," Paper 72504 presented in the 2001 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 30 September to 3 October, 2001.

42. Rodríguez-Román, J., and Camacho-V., R.G.: "Decline Curve Análisis Considering Non-Laminar Flor in Two-Porosity Systems," SPE 74388 presented at the SPE International Petroleum Conference and Exhibition in Mexico, Villahermosa, México, 10-12 February 2002.

43. Fairuzov-Y, V., González-G., J. A., Lobato-B., G., Camacho-V., R. G., and Fuentes, F..: "A Lumped-Parameter model for Transient Two-Phase Gas-Liquid Flow in a Wellbore", SPE Production & Facilities, February 2002.

44. Camacho-V., R.G., Galindo-N., A., and Prats, M.: "Buildup Solution in a System with Multiple Wells Producing at Constant Wellbore Pressures," SPE Reservoir Evaluation & Engineering, August 2002.

45. Camacho-V., R.G., Vásquez-C.,M., Castrejón-A., R., and Arana-O., V.: "Pressure Transient and Decline Curve Behavior in Naturally Fractured Vuggy Carbonate Reservoirs," Paper SPE 77689 presented in the 2002 SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September to 2 October, 2002.

46. Poblano, E., Camacho-V., R.G., and Fairuzov, Y.V.: "Stability Analysis of Continuous-Flow Gas-Lift Wells," Paper SPE 77732 presented in the 2002 SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 29 September to 2 October, 2002.

47. Flamenco-L., F., and Camacho-V., R.G.: "Determination of Fractal Parameters of Fractured Networks Using Pressure-Transient Data," SPE Reservoir Evaluation & Engineering, Volume 6, Number 1, February, 2003

48. Del Río-H., J., Camacho-V., R.G., Robles, A., González-T., F., and Santamaría, N.: "Nonlinear Multivariate Optimization of Production Systems Using a Mechanistic Model, " SPE 84050 presented in the 2003 SPE Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October, 2003.

49. Fuentes-C., G., Camacho-V., R.G., Vásquez-C., M.: "Pressure Transient and Decline Curve Behaviors for Partially Penetrating Wells Completed in Naturally Fractured-Vuggy Reservoirs," SPE 92116, presented at the 2004 SPE International Petroleum Conference in Mexico, Puebla, Mexico, 8–9 November, 2004.

50. Padilla-S., R. and Camacho-V., R.G.: "Reservoir Performance Under Solution Gas-Drive and Gravity Drainage," SPE 92186, presented at the 2004 SPE International Petroleum Conference in Mexico, Puebla, Mexico, 8–9 November, 2004.

MEMBERSHIPS

 Society of Petroleum Engineers
 Petroleum Engineers Association of Mexico, AIPM
 National System of Researchers, SNI (Mexico).

AWARDS AND RECOGNITIONS

* Chairman of Education and Professionalism Committee of the Society of Petroleum Engineers, 2001-2002.

* Invitation to participate as a member of Committee for SPE Reprint Series: "Oil and Gas Production Data Analysis", for the Society of Petroleum Engineers, 2001.

* Technical Editor for the SPE Reservoir Evaluation & Engineering of the Society of Petroleum Engineers, since 2001.

* "Instituto Mexicano del Petróleo" Award given by the Petroleum Engineers Association of Mexico (A.I.P.M.), for research and technology development achievements in Petroleum Engineering, Veracruz, Veracruz, Mexico, 2000.

* Member of the National System of Researchers, SNI (Mexico).

* Outstanding Technical Editor for the Society of Petroleum Engineers, 1997 and 2003.

* Member of the Evaluation Committee for Production, for the Stimulus Program for Researchers and Specialists of the Mexican Petroleum Institute since 1997.

* Review Chairman for the SPE Reservoir Evaluation and Engineering, 1997-1999.

* Technical Editor on the Society of Petroleum Engineers Editorial Review Committee, since 1996.

* Member of the "Experts Committee of the Petroleum Engineers Association of Mexico, A.C. (AIPM)", since 1993.

* "Juan Hefferan" Award given by the Petroleum Engineers Association of Mexico (A.I.P.M.), Cd. del Carmen, Campeche, Mexico, 1993.

* "I.M.P." Award given by the Mexican Petroleum Institute, Mexico City, 1990.

* "Juan Hefferan" Award given by A.I.P.M., Querétaro, Mexico,1990.

* "Academic Excellence" Award given by the Atlantic Richfield Company, Tulsa, Oklahoma, 1982.

* Member of Pi Epsilon Tau.

* "Gabino Barreda" Award given by the National University of Mexico, (U.N.A.M.), Mexico City, 1979.

TRAINING

TECHNICAL
2003 Introduction to the Petroleum Geology of Deep Water Depositional Systems - short course, Roger Slatt, University of Oklahoma.
2003 Monte Carlo Simulation –short course, Jim Murtha & Susan Peterson, Society of Petroleum Engineers.
1992 Integrated Reservoir Management – short course, Abdus Satter, Society of Petroleum Engineers.
1990 Horizontal Well Technology – Conference & Exposition, World Oil sponsored by Philip C. Crouse & Associates, Inc.

REFEREES
Available on request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 6543)Go to Search Parameters...
Brief Description
Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.
Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).
corrosion and cathodic protection
Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,
Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job
See resume body
Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.
Maint Planning, Materials management, warehouse, plant maint, turnaround, project
Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation
Reservoir/Geoscience Technician
Completion/Workover Supervisor
I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering.
Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K
Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a
Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.
Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect
Instrumentation ICSS commissioning specialist
SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP
Professional with a BS degree in Physics electronics, an MS in Project Management. I have experiences in project engineering and oil/gas seismic exploration. This background with over 20yrs work history equips me to deliver projects on schedule, with quality and within cost.
Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.
I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const
I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).
Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic
Telecom Engineer transmission speciality more than 16 years experience
18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years
Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.
I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.
I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.
Experience well test engineer
OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2
With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.
Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint
17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.
Piping related job like draftsman or designer ability to work on microstation, have experience of near by 35 years as piping draftsman;
Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers
Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer
DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER
PABX SERVICE ENGINEER
Production Engineer with 12 years of industry experience
BSc in env. MSc in safety eng.
Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East
Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)
Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.
Free! I am applying for the job posting in Fory McMurray with Sands Surveys 2000. I am fully qualified and looking forward to hearing from you. Please see my resume for my experience. I am available to start work when you need me to.
Field Engineer
GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT
Petrophysicist, Log analyst
He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head
First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com