Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2002 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
To work in Process Development and Basic Engineering of Refinery, Petrochemical, Utilities and Offsite systems.

EDUCATION
Bachelor Of Technology (B.Tech) Honours in Chemical Engineering from Indian Institute Of Technology (I.I.T), Kharagpur, India, 1983.

MAJOR JOB EXPERIENCE
Company: Engineers India Limited (E.I.L), Process Design & Development Department, New Delhi, India.

2001 to present, Senior Manager

o Presently working on developing and making a proposal of an extractive LPG treating /catalytic caustic regeneration technology - first one for my
company.

o Licensor selection for Hydrocracker, Hydrogen and Delayed Coker for a grass root 9.0 million tons per annum refinery for Hindustan Petroleum Corporation Ltd, India.

o Process simulation and Basic Engineering for Gas Oil ASTM T95 improvement for a 1.35 million tons per annum crude unit for Bongaigaon Refinery & Petrochemicals Ltd, India.

1996 to 2001, Manager

o Basic Engineering of a 6.0 million tons per annum Crude & Vacuum Distillation unit for Bharat Petroleum Corporation Limited at Bombay, India. Improvised the design to consume lowest energy as compared to our earlier designs. Did utilities, steam/power balance and flare adequacy check for this expansion for the entire refinery.

o Configuration study on Motor Spirit(MS) Benzene reduction and Diesel Sulphur,T95 reduction for three existing refineries at Panipat, Gujarat and Mathura for Indian Oil Corporation Limited.

o Basic Engineering of a 2.3 million tons per annum Lubricating Oil type Vacuum Distillation unit at Haldia, India, for Indian Oil Corporation Limited.
While doing this, solved viscosity blending problem in PROII simulator.

o Residual process/detailed engineering of a 1.2 million tons per annum once through Hydrocracker (licensed by Chevron, USA ) at Mathura, India, for
Indian Oil Corporation Limited.

o Basic Engineering of Utilities/Offsite and 840 tons per day of Sour Water Stripper for Mathura Refinery, India, for Indian Oil Corporation Limited.

1992 to 1996, Deputy Manager

o Worked jointly with Chevron (USA) in Basic Engineering of a 1.1 million tons per annum full conversion Hydrocracker at Numaligarh, India, for
Numaligarh Refineries Limited.

o Basic Engineering of a 306,000 tons per annum Vacuum Residue feed Delayed Coker at Numaligarh, India, for Numaligarh Refineries Limited.

o Basic Engineering of a new 1.35 million tons per annum Crude Distillation unit at Bongaigaon, India, for Bongaigaon Refineries & Petrochemicals Limited.
Basic Engineering of a new cooling water system and adequacy check of existing flare system of the refinery.

o Detailed Project Report for expansion of a Delayed Coker from 336,000 to 440,000 tons per annum at Guwahati, India, for Indian Oil Corporation
Limited.

o Detailed Project Report for energy / distillates yield improvement of an existing 500,000 tons per annum Delayed Coker at Barauni, India, for Indian Oil
Corporation Limited.

1988 to 1992, Senior Engineer

o Detailed & Residual Basic Engineering of a 50,000 tons per annum Ethylene Glycol plant (licensed by Union Carbide, USA) at Nagothane, India, for Indian
Petrochemicals Corporation Limited.

o Basic Engineering Design (extension of Licensor UOP study report) for expansion of a Linear Alkyl Benzene plant from 31,500 to 50,000 tons per annum at Baroda, India, for Indian Petrochemicals Corporation Limited.

o Detailed Project Report for capacity debottlenecking of an existing 18 tons per day of Acrylic Ester plant at Baroda, India, for Indian
Petrochemicals Corporation Limited.

1985 to 1988, Engineer

o Basic Engineering for expansion revamp of Ethylene Glycol plant from 10,000 to 15,000 tons per annum at Thane, India, for National Organic Chemical
Industries Limited.

o Licensor evaluation for a 50,000 tons per annum Ethylene Glycol plant at Nagothane, India, for Indian Petrochemicals Corporation Limited.

1984 to 1985, Junior Engineer

o Study report on improving reactor cooling system to achieve higher catalyst activity in a 6000 tons per annum Phthalic Anhydride plant for Herdillia Chemicals Limited, Bombay, India.

o Detailed Project Report for feedstock change over to ortho-xylene from naphthalene of a 6,600 tons per annum Phthalic Anhydride plant at Durgapur, India, for Durgapur Chemicals Limited.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1751 to 1800 of 7051)Go to Search Parameters...
Brief Description
Design Engineer ( Static Equipment )
HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)
I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.
I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.
B-Tech in mech with 7.5 years of experience in plant design arena
Eletrical enginer for 8 yrs experince as chief enginer
Civil Structural Engineer
I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.
weldin inspection
Having a Diploma in Mech. Engg. with 18 years of Experience in Designer
Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.
I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.
Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring
Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company
15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.
18 years experience in process design of refinery and petrochemical units.
Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.
A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.
I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.
More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.
A well rounded drilling personnel with a unique experience in drilling and completion / work over operations
Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.
Quantity Surveyor/Estimator (Mechanical)
All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.
Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction
Primavera , MS Project
A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.
Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.
i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.
I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.
ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.
I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures
Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.
7 years experience in Mechanical maintenance
- Good at English and drilling software.
16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).
GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS
Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.
Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).
An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.
HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date
Oil and gas mechanical technician
I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.
Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.
See resume
Resume for Project engineer position
Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC
Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   [ 36 ]   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com