Resume - 15 years of progressive experience and responsibility with documented success in...

Misco Jobs

Resume #2036

CONTACT INFORMATION:
View contact information...

PROFILE:

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels.
I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

EXPERIENCE:

    Arabian Gulf Oil Company    Benghazi, Libya
    Drilling Supervisor    1997 to 2001
Scope: Supervised drilling operations, workover and completion of development, exploration, deep, shallow, vertical and horizontal oil wells. Worked as a company man and drilling Superintendent.
•    Worked as a Field drilling Supervisor (Head of Field Drilling Department) to run 4 drilling & workover rigs- consulted on operations, requirements, administration and trouble-shooting.
•    Applied engineering / operational practice to successfully implement drilling & workover programs.
•    Successful supervision of a project for drilling and completion of 10 horizontal wells along with implementing Coiled Tubing technology to kick-off natural production
•    Assisted subordinates and supervisors in identifying and resolving problems.
•    Provide technical consultation during drilling operations to resolve problems such as bore directional change, unsatisfactory drilling rate, mud engineering, system and materials.
•    Advised substitution of drilling mud compounds and tool bits to improve drilling conditions.
•    Implement the use of computerized forms for daily drilling reports and other technical forms.
•    Executed and followed up daily operations of drilling and workover rigs.
•    Serve as a company representative to liaison with contractors.
•    Respond to written and telephone calls of superiors and contractors.
•    Identified problems, diagnosed causes and determined corrective actions.
•    Learn all aspects of the job and the social environment.
•    Maintained inventory of drilling and mud materials on well site and in warehouse.

    North Oil Company    Kirkuk, Iraq
    Chief Engineer    1995 to 1996
Scope: Assistant of Field Division Manager for the upstream technical and administrative activities.
•    Organize the activities of Drilling, Geology, R & D and Reservoir Engineering departments.
•    Unified plans, programs and requirements of the above departments for short and long terms.
•    Follow up of daily operations, technical and administrative.
•    Answered questioner and requirement of higher authorities for specific needs and plans.
•    Attended daily meetings of the Heads of the said departments with the Field Division Manager.
•    Created and Published H2S Safety Manual as a general guide for the company employees
•    Expedited communication between upper level management and general personnel.
•    Contributed to all aspects of technical and administration requirements of the company.

    Senior Drilling Engineer    1991 to 1994
Scope: Worked as Drilling Operations Manager.
•    Followed up and supervised drilling operations throughout Mid-North Iraq.
•    Co-coordinated with drilling contractors the execution of drilling contracts.
•    Negotiated terms of drilling contracts and contractor's agreements.
•    Supplied drilling materials to well site locations with out any delays.
•    Revised drilling programs, well designs and trouble-shooting of well problems.
•    Helped oversee all aspects of drilling operations & engineering for the head of drilling department.
•    Maintained close personal contact with drilling supervisors, other operational units & departments.
•    Demonstrated effective personal communication skills at all levels of work and management.

    Unit Mud Engineer    1988 to 1990
Scope: Supervised and controlled mud engineering and operations for 17 drilling rigs.
•    Follow up of daily mud engineering & operations all over Mid-North Iraq area.
•    Supplied and advised the use of mud materials for different kinds of drilling fluids.
•    Designed drilling fluids programs as an integral part of the drilling program.
•    Standardized, specified and approved drilling fluids materials: specifications & purchase approval.
•    Applied & implemented the use of national mud materials instead of imports: as a part of team helped in specifications, field tests & approval to use national Bentonite & Calcium Carbonate.
•    Changed mud system in many oil fields to eliminate hole problems and reduce drilling time & cost.

    Drilling Engineer    1983 to 1987
Scope: Worked as a Drilling Supervisor (Company Representative) and Mud Engineer.
•    Worked as Company Man to Supervise & follow up the daily drilling operations & requirements, on wellsite, of drilling contractors on development and exploration oil and gas wells.
•    Supervised contractors: Saipem, Bulgargeomine, Stroje Export, RomePetrol and ADWOC.
•    Controlled drilling fluids operations, worked as a Mud Engineer on wellsite.

EDUCATION:

    University of Southern California    Los Angeles, California
    M. Sc. in Petroleum Engineering

    University of Baghdad    Baghdad, Iraq
    B. Sc. in Petroleum & Minerals Engineering

PROFESSIONAL DEVELOPMENT:

    IWCF, PITS, Nisku, Aug. 2002
    H2S Alive, PITS, Calgary, Jun. 2001
    WHMIS, PITS, Calgary, Jun. 2001
    TDG, PITS, Calgary, Jun. 2001
    1st Aid Emergency, St. John’s Ambulance, Jun. 2001
     MS Office computer course, Calgary Immigrant Educational Society, Nov. 2001
     Computer Skills: Proficient in Microsoft Word & Excel, familiar with Power Point & Access.

VOLUNTEER WORK:

    Computer / Office Assistant with Supply Chain Management, Shell Canada Ltd., Dec. 3-14, 2001.

AFFILIATIONS:

    APEGGA - Membership in progress
    Practitioner, Iraqi Union of Engineers

LANGUAGES:

    English (Fluent)
    Arabic (Mother Tongue)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 7055)

Go to Search Parameters...

Brief Description

HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)

I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.

I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.

B-Tech in mech with 7.5 years of experience in plant design arena

Eletrical enginer for 8 yrs experince as chief enginer

Civil Structural Engineer

I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.

weldin inspection

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out