Resume - experienced in processing seismic data, land/marine, onshore/offshore, 2D/3D, QC...

Misco Jobs

Resume #20826

CONTACT INFORMATION:
View contact information...

KEY EXPERIENCE
Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

SPECIALIST AREAS
Remote Centre Processing: experience of processing for land data on field and on board, using modern workstation UNIX system.

Reprocessing Data: extensive experience in the original processing and reprocessing data from Parana Basin (South of Brazil); extensive experience in the marine data from Campos Basin and Santos Basin (Brazilian Cost): special processing for shallow water in Strait of Magalhães (South of America).

Technical Expertise: 2D and 3D acquisition, quality control and processing techniques. Geometry QC/QA and analysis of geometry footprint problems, to match navigation data onto seismic data, refraction statics, field and tidel static analysis, marine and land undershooting acquisition, seismic-stratigraph facies, environment problems into brazilian laws.

Project Management: Management of seismic exploration projects from the initial survey design through to the final data processed onto workstation.

WORLDWIDE EXPERIENCE
Operational experience in the following countries:

Europe: United Kingdom, Holand
Far East: Indonesia, Cingapure
South America: Argentina, Bolivia

SOFTWARE EXPERIENCE
Operational familiarity with ProMAX 2D and 3D (Robertson Research and Grant Geophysical), Omega (Western), Green Moutain, UNISEIS and M3D (old Simon Petroleum Technology)
Knowledge of UNIX operating systems, including use of vi.
Some experience with the software MESA - survey design

PROFESSIONAL EXPERIENCE
Veritas Actually

QC/QA and processing onboard for Spec data and 3D – Santos Basin, Brazil; Polar Search Vessel, using the TANGO system. In 2002, I was transferred to Rio de Janeiro's office to work as geophysicist responsible of copy/transcription team, using linux system.

Consultant 1999 on March/July

Technical translations to the customs of the boats are coming to Brazil. They are Pacific Horizon, Kenda and Atlas.
Environment for transitions zones of brazilian coast to the Grant Geophysical and Fairfield. I made the contacts and the proposals to be send to the IBAMA - Brazilian Bureau of Environment.

Western Geophysical 1998-1999 before March

2D special data processing based in Buenos Aires, Argentina, for TOTAL: Strait of Magalhães' area - over 50 km; 3D marine quality control and geometry check in the office for ENAP - 2500 km.
2D reprocessing land data based in Santa Cruz de la Sierra, Bolivia, for ANDINA (1800 km) and BRASPETRO (300 km);

Grant Geophysical 1997-1998

Geophysicist responsible for the quality control and acquisition on field - 3D (600 km) and the first 4D in Brazil (25 km2) seismic land data in Northeast of Brazil - Potiguar Basin; line tests of acquisition parameters, sources and processing on field for PETROBRAS.

Robertson Research 1995-1996
(old Simon Petroleum Technology)

Based in Swanley, United Kingdom, I worked with the land processing group of the company, using ProMAX and Convex mainframe, with data from Yemem, Pakistan, Afganistan and Greece for British Petroleum and LASMO; with Pakistan 2D data I made maps of the velocity and refraction statics applied of the area.
Quality control and acquisition on board of Simon Labrador: 3D marine seismic data on North Sea - working for SHELL, Amerada Hess and CLYDE, doing several undershooting into those prospects.

Simon Petroleum Technology 1994-1995

Based in Jakarta, Indonesia, I worked for LASMO (3000 km), KUFPEC (800 km) and KESTREL (1500 km), processing 2D seismic land data, responsable for geometry qc and refraction statics solution.

Promon Geofísica Ltda 1991-1993

Based in Curitiba, south of Brazil, I was responsable for land data processing (over 16000 km) of Parana Basin, refraction statics solutions using up hole time and refraction to be tied on the lines.
Also, I showed the academic work "Mute: na analysis in recent data of Parana Basin" in the I International Congress of Geophysics.

Promon Geofísica Ltda 1990-1991

Based in Rio de Janeiro, I processed over 6000 km marine seismic data 2D and 3D of Santos and Campos Basins, for the PETROBRAS. Also, I processed 7000 km of LEPLAC VIII - Rising of the Continental Plataform, for the Brazilian Navy, and I accomplished a meticulous rising of the problems about the acquisition and engineering of the system on the Petrobras' boat, to the Professor Maldonado.

SUMMARY OF RECENT PROJECT WORK
1. Santos Basin – Brazil Offshore. Responsable for QC/QA and processing on board of the POLAR SEARCH, operating spec 2D data acquisition with TANGO system to do S/N checks on the data. After this spec data, we begun the AMERADA HESS 3D project, in the same area, but 3D data acquisition.

2. North Sea - Dutch waters (1996). Responsable for QC/QA on board of the SIMON LABRADOR, operating on real-time 3D acquisition, checking the shots, level of S/N in the shots and ambient noise, plot of near trace for all cables (port/center/starboard), one brutestack, merge navigation data with seismic data to be saved into the exabyte tape, backups and time-slices of the prospect once a week. The client was CLYDE and we used the M3D - Robertson Resarch's software.
3. Northeast of Brazil - Apodi/Rio Grande do Norte (1997). Responsable for QC/QA on field with 3D land data; 2D tests lines with two different power-gel/quantity; survey design with MESA for the High of Rodrigues' prospect; using ProMAX 3D/2D.
4. Special processing for TOTAL, Strait of Magalhães' shallow water, looking for pull up and pull down, picking first break time and plotted over the raw data to be showed to the client those structures are real and the change of travel-time into the structure versus the different offset, using OMEGA software (1998).
5. Reprocessing land data for ANDINA (YPF Argentina company in the Bolivia - 1998), checking the crosslines are tied, picking first break time and applied refraction statics solution, velocity analysis, residual statics, dmo, cdp trim, migration and final film.
6. Processing 2D Colombia marine data in Rio de Janeiro, for SHELL/TEXACO. The data were extracted the primary and second multiples from bottom sea and the structures, using tau-pi techinic of supression multiple, in 1999.

PROFESSIONAL AFFILIATIONS
SBGf, Brazilian Geophysical Society, Brazil
SEG - Society of Exploration Geophysicists, USA.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 7051)

Go to Search Parameters...

Brief Description

My background has 15 years of Heavy chemicals, Dyes, Petrochemicals process safety and Refinery Construction HSE experience in India as well as foreign countries Recently acquired NEBOSH Qualification

Automation Specialist with more than seven years of experience with Allen Bradley (Rockwell Automation PLC (ControlLogix, PLC-5), HMI (RSView, PanelView), and Emerson DeltaV DCS.

To absorb all qualities of good professional with my technical thoughts contribute towards organization.

Wireline logging operator, logging tools rig-up,rig-down,servicing,trouble shooting and repair. modular sampling tool speacialist (mdt

Instrumentation engineer/engineering manager, 7 years experience

INtools Implementation, • INtools PSR Customization, • SQL Query writing• INtools Support• INtools/SPPID Training to users• SPPID Implementation• Smart Plant Electrical

Proven excellent planning, communication, reporting skills,investigative and analytical skills, troubleshooting, maintenance skills. proven first class health safety and environment culture

A multi-disciplined, goal orientated and experienced Commissioning Manager and Engineer with excellent communication, organisational and personnel management skills on advanced technology, high value, schedule critical and high profile projects.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

I have diversified vast professional experience in the construction industry. Have managed and worked with complex competitive challenge projects and have implemented them successfully with efficiency and quality. Expertise in Project Manger, Expertise in Checker, Expertise in Project

Objective : A suitable position in project planning & controls or allied departments providing the opportunity to make a good contribution to your organization goals through continued development of professional skills, hard work and application of acquired knowledge.Experience total - 12 years

Electrical Maintenance Engineer - Has 12 Years Experience.

More than 10 years experince in the field of Welding Inspection. Presently working with Saudi Aramco as Sr. Project Inspector.

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

Around sixteen years of extensive experience in Instrumentation and Control Systems for chemical and petrochemical industry that includes project engineering work, installation and testing, commissioning and maintenance of DCS / PLC systems.

Control systems engineer with 8 years background in the oil@gas industry

Microstation 2D & 3D Designer

Welding Supervisor: SSCL.DME (3years welding), WI (QA/QC), Safety qualified,21years Experience, worked with ASME, AWS, API standard in Major EPC Industries such as Onshore, Upstream ,Petro-chemicals (Offshore piping & Structures, Oil & Gas Piping, Steam Boiler Piping, HP vessels & Storage Tanks) .

experienced in processing seismic data, land/marine, onshore/offshore, 2D/3D, QC/QA analysis, strong in first break picking, velocity analysis, multiple attenuation, promax, green moutain, mesa softwares.

Instrument Design Engineer

I am currently seeking an overseas position in the petrochemical industry. I am focusing on China, S.E. Asia, Australia, New Zealand, Mexico and S. America. I have 17 years of experience managing the design and construction of capital projects in the petrochemical industry.

SUMMARY 95 - Present Varied positions See detailed CV Exxon Mobil Transfield Worley JV (TW JV) Halliburton TW JV Brown & Root (Thailand) Kavaerner Norway AOC North Sea United Construction Woodside Aust

Oil and Gas Gas processing and NGL recovery On-line optimization of petrochemical plants advanced process control Information Technology

I have extensive experience in project evaluation and execution from conceptual phase to abandonment. Strong background in production operations and production enhancement. Recent work in the area of technology identification. Extensive experience in asset team management in the upstream business.

Seeking employment in the Environmental Industry. I hold Bachelor and Masters degree in Petroleum Engineering and will complete another Masters degree in Hydrogeology by 05/02.

Chemist, Inorganic, Organometallic, Organic

Work Experience -15 Years well established organization for inspection activities, Project co-ordination Inspection , QA/QC / Welding / Mechanical /Piping /Painting & Pipe lay Barge Deep sea Sub-Marine Pipeline project.

I have 20 Yrs exp., after Dip. in Mech. engg. & Safety Engineer/Officer have 12 yrs exp., mainly in the field of Oil, Gas, Petrochemical & power plants industries in maintanance, shutdown & construction works in India & Gulf countries.

I am a reservoir simulation engineer with experience in both compositional and black oil. Additional skils include geostatistics, petrophysical evaluation and cased hole log anaylsis including production logs.

20+ years shipbuilding and offshore piping and ventilation routing.

I would like to be considered for the post as above or any position which is suitable or related with my qualifications and experiences in your company. I have more than 6 years of working experience in several industries which is related in Oil & Gas offshore and onshore. Currently I am working

A highly motivated, professionally determined Petroleum Engineer with six years diversified working experience with oil and gas exploration and production Company in all aspects of well completions and production engineering.

I have completed diplomo in electrical and elcetronics .First I have worked in erection and maintenance in 110kv substation.second I have worked in wind power plant..Here my job was maintenance and Troubleshooting of wind turbine generator.Now I am working erection and commissioning of oil field.

PDMS Pipe Designer

To apply for a role where I can demonstrate and expand my Drilling skills within the oil and gas drilling industry

Competent Mechanical Engineer with specialization Thermal Coating Systems and Insulation (Cryogenic/Cold, Hot, Acoustic).Having around 06 years of progressive working experience in the construction fields of Oil & Gas, Petrochemicals Plant, Steel manufacturing Plant

Service, commissioning, start-up, construction in Instrumentation and Control

I have more than 8 Years working experience of power plant operation, since April 2000 I am working in the CHASHMA NUCLEAR POWER PLANT as plant operator.

Skills Summary ; Project Management , Computer/ Software programmes savvy, Quality Orientation, Work and Industrial Safety standards, a Quality Assurance/Quality Control Inspector.

Mechanical engineer-3year experience

A professional and dedicated Mechanical Engineer with 3 years Oil & Gas Industry experience, including expertise in Design (CAD), Structural Analysis (FEA), GD&T, ASME Code, Excellent communication and interpersonal skills with strong analytical and practical field engineering experience.

Wellsite drilling engineer

My professional experience is based on Supervision of oil field operations, quality and maintenance of inyection systems with chemical products. I´ve wide and strong knowledge on oil production processes and constantly technical consultantship to the costumers about of the chemical treatment .

QA/QC Coating Inspector

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

A highly determined and skilled Mechanical Engineer with over 15+ years of overseas and in country experience in performing Piping Construction Supervision, in Oil/Gas process plants and pipelines projects too.

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

An Electrical Engineer

Application for the post of – Mechanical, Plumbing & Piping Engineer

Oil exploration and production. Selection of drill sites, drilling operations, open hole logging evaluation, sample and paleontological analysis, vertical and horizontal drilling activities.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out