Resume - Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

Misco Jobs

Resume #21005

CONTACT INFORMATION:
View contact information...

Sr Off-shore Instrumentation Engineer (I&C)
Location: Malaysia Country

DETAILED CV BELOW
Languages Spoken: English, Hindi
Current Position: Sr Instrumentation Engineer ( Detail & Design Engg.)

WORK EXPERIENCE:
* Total 18+ years experience

1)Diploma in Instrumentation Engineering in Aug 1988 ( 3 Years full time )
2)Completed AMIE eqvt to B.E. Degree in September 2000.
3)Knowledge of computer applications.

Technical and Operation: Total 18+ Years experience

Working experience in detail as below with following process plant.
1)DM water and effluent treatment plant.
2)Large Thermal power plant.
3)O N G C. Off-shore platforms and plants.
4)Refinery plants i.e. Hydrogen generation unit, reformer, HCU, CDU, VDU, DCU, SRU,
CPP plant. Process plants etc.
5)Off-Shore Process Plants / F P S O and Biodiesel Plants

Working field experience in brief as below:

Experience in with good knowledge of Detail Engg. Field Instruments And Inline Instruments Selection and Sizing along with preparing, Referring and reviewing the Engg / vendor documents for all applicable field instruments of the process plants instrumentation with PLC and DCS/ ESD System and control panels. Also preparation of interconnections diagrams for control panels, field instruments and equipments for the plants with the help of INTERGRAPH INTOOLS, SPR, PDS, MICROSTATION, EDMS and Infoworks etc, software applications tools and operating Systems.

Working experience on Intergraph INtools, SPR, PDS, Microstation, EDMS
and Infoworks etc, softwere operareting Systems with the Engg consultant Cos
.
Also having solid hands on experience in Erection and Commissioning of the process plant instrumentation systems including loop checking with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc and thus running the plant after successful commissioning.(G T R )

Also experience in revamp project works execution with consulting co.

Working and Commissioning knowledge on PLC's and DCS systems i e. DCS -Yokogawa, YBL centum Xl. Centum CS-3000
PLC - Allenbradley, Triconex—1131 V2, Siemens – S 7

I have independently worked for the Numaligarh Refinery plant, NRL (Assam)
and at Barauni Refinery plant, I O C L ( Begusarai, Bihar) in INDIA for the turnkey projects of M/S LARSEN AND TOUBRO LTD GR II an EPC Co at Mumbai.

As well as Abudhabi ADNOC SRU Refinery project at RUWAIS ( U.A.E. ) and in KSA, Jeddah for power project of ABB SADELMI (Shoaiba) and SWCC water transmission plant in ABROAD.

The company represented and worked for are as below in detail
1)Plant And Offshore Technology Sdn. Bdn. Project Detailed Engg.
Consultancy for Oil Fab Sdn. Bhd. along with Carigali-pttepi Operating Co.
(CPOC) a Petronas Co. As Sr. Instrumentation engr. In Engg Design Dept
Since June 2007 To date Continued Presently.at Kelana Jaya in Malaysia ( K L )

2) Bechtel India pvt Ltd ( a leading Multinational EPC / Engg. Consulting co.)
at GURGAON in Design Dept on contract employment as Sr. Instrumentation engineer for Detail engg since 16th Jan 06 to 23 March 2007. ( End of contract Term of 1 year )

3) Worked for AKPG Engg a Consulting co in Mumbai From Jan 2004 to10th Jan2006

4) Tata Consultancy Engineers Ltd From 6/1/2002 to 9/12/2003 as Instrument engineer.

5) M/S Carlo Gavazee Arabia Co Ltd. ( Saudi Arabia, Jeddah ) From 29/07/2000 to 24/02/2001 as Instrument engineer in Engg Divn.

6) Kushal engg. enterprises.. > From 15/6/96 to 30/6/2000 as Site engineer ( E & I )

7) Keystone valves India pvt Ltd. > From 23/1/95 to 7/6/96 as Sr. Instrument engineer.

8) Oil and Natural Gas Corporation. ( O N G C Offshore ). > From 21/8/90 to 22/1/ 95 as Junior Instrument engineer.

9) Classic engineers for (O N G C Offshore ) > From 9/12/89 to 7/7/90 as Junior engineer

10) Elder indl. inst. pvt. Ltd. > From 1/9/88 to 6/12/89 as Instrument engineer

Supervisory / Management / Computer:
1) Experience in supervisory activities
2) Working experience with managerial group and system of the company.
3) Working experience with computer applications.
4)Creative and Analysing skills.
5) Capable of Performing as Team / Group Leader of team work assigned.

Working experience with Multinational company in India and Abroad as listed..

Creativity on the basis of experience and ideas.

Independent project work Execution and Commissioning is the main achievement.

Working field experience in details as below:

1)Plant And Offshore Technology Sdn. Bdn. ( A Leading EPC Consulting Co.)

Sr. Instrument engineer for the Detail engg of Topside Well Head Platforms
(Carigali-pttepi Operating Co. (CPOC) & FPSO OYO (Nigeria)
with Bumi Armada Co's Project in Malaysia ( K L )

From 5th June 2007 Till Date. Continued Presently. at Kelana Jaya in Malaysia ( K L )

The job involves All applicable Detail engg for the Instrumentation systems alongwith all field instruments And Inline Instruments Selection and Sizing for the Offshore Platforms, Preparing all spec and Datasheets for the Instruments, preparing PR, Doing TBE and Techno commercial Meetings with various Inst Related Vendors for the all applicable instruments, referring and reviewing the engg / vendor documents JB wirings Diagram, Inst. Hookups, MTOs For Cable, cable trays Tubes and Fittings and JBs for all applicable field instruments, PLC and DCS loops and interlocks of the process plants.
Also control loop checking and reviewing w.r.t P&I D for Control system with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Also reviewing and Approving the vendor's documents for all inst. For the project and systems along with distributed control systems (DCS), Emergency shutdown systems (ESD),
F & G Systems, telecom and public address equipment and outstations, etc, cable laying, earthing, lighting and small power, field instruments such as emergency shutdown valves, control valves, safety relief valves, flow instruments, level instruments, pressure & differential pressure instruments, temperature instruments etc.

2) Bechtel India Pvt Ltd. ( A Leading Multinational EPC Consulting Co.)
Sr. Instrument engineer for the Detail engg (GASCO OGD-III Project, Abudhabi UAE.)
From 16th Jan 2006 to 23 March 2007. ( End of contract Term of 1 year )

Preparing / checking engineering drawings, Detail engg. includes preparing, referring and reviewing the engg / vendor documents for all applicable field instruments wrt P & ID of the process plants instrumentation with PLC and DCS/ ESD System and Control Panels.
Also preparation of interconnections diagrams for control panels, field instruments and equipments for the plant with the help of INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Info works etc, software applications tools and operating platforms. instrument data sheets, Specifications, and handling requisitions of materials / equipment, vendors bid evaluations, Preparation of subcontract packages, etc. with the help of Intergraph INtools, SPR, PDS, Microstation, EDMS and Info works etc, software operating Systems.

2) Aker Kvaerner Power Gas Ltd, An Engg MNC Consulting Co.

Instrumentation engineer ( E & C + Detail engg. ) of various process plants.

From Jan 2004 to 10th Jan 2006 (2 Years)

The job involves Detail engg, Preparing, referring and reviewing the engg / vendor documents for all applicable field instruments, PLC and DCS loops and interlocks of the process plants.
Also control loop checking and reviewing w.r.t P&I D for Control system with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Also reviewing the I &C works covering control/ telecommunication systems along with distributed control systems (DCS), Emergency shutdown systems (ESD), F & G Systems, telecom and public address equipment and outstations, etc, cable laying, earthing, lighting and small power, field instruments such as emergency shutdown valves, control valves, safety relief valves, flow instruments, level instruments, pressure & differential pressure instruments, temperature instruments etc. working experience on INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Infoworks etc, software operating platforms

3) Tata Consultancy Engineers Ltd (Mumbai)
Instrument engineer Revamp project work. ( Detail engg. ) ( Cabbot India. Mumbai)
From 6/1/2002 to 9/12/2003 (1 year and 11 months )
All field instrument and control panel wiring diagram and interconnections of the equipments for the pumping station. Preparation of interconnections diagrams for control panels, field instruments and equipments for the plant. Also loop checking with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Preparing the engg. docs for revamping works by referring and reviewing the engg / vendor documents for all applicable field instruments, PLC and DCS loops and interlocks of the process plants. Also associating in technical bid evaluations, following-up on placement of orders and vendor document approval, monitoring vendor progress, Coordinating and resolving engineering / vendor / client queries, liaising for inspection / release of materials, expediting with vendors for delivery of material, preparing project method statements and procedures, issuing fabrication and "AFC" drawings to site, monitoring progress of work at site,
Preparing mobilization plans for vendors for installation / commissioning at project sites, work packs and micro-schedules for site activities, monitoring the execution of additional works, documenting contractual variations and changes to scope, Reviewing and compiling vendor As-built documentation / manuals and compiling final documentation for the project. working experience on INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Info works etc, software operareting Systems.

4) M/S Carlo Gavazee Arabia Co Ltd. ( Saudi Arabia, Jeddah )
Instrument engineer / Supervisor ( E & C + Detail engg. )

From 29/07/2000 to 4/02/2001 ( 7 months ) ( N O C Given by co.)
Erection & Commissioning of the instrumentation system in power plant of ABB
SADELMI. Also instrument lab work, project execution and man power management. control / MCC panel installation and inter-connection wirings with inst. JBs and DCS panels. loop checking of the same. Also worked with Snamprogetti-Saipem joint venture in engineering design department as an Instrument engineer for Shoaibah-Jeddah water transmission system and fuel pumping station for the S W C C Organisation.
The job involved preparation of the terminal strips, control panels wiring diagram with respect to Data Aquisition and Control (DAC) system, P & I D, instrument data sheets and wiring diagram of plant equipments and instruments ie LV / HV panels, motors, LCP of pumps. Also all field instrument and control panel wiring diagram and inter- connections of these equipments for the pumping station. Preparation of interconnections diagrams for control panels, field instruments and equipments for the plant. Also loop checking with DCS/ESD panel and checking the interlocks and trip logics of the process plant etc. Solving the technical queries and existing problems related to plant equipment systems.
and Simplex make. Yokogawa DCS and PLC etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7054)

Go to Search Parameters...

Brief Description

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

Offshore Rig Safety & Training Coordinator.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out