Resume - Drilling supervision and engineering, well control instructor, rig commessioning

Misco Jobs

Resume #21293

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
-July2002 to present: Drilling Supervisor PDO/Shell; Sultanate OMAN,
Drilling supervisor on the rig 31 working in Alhuwaisah, Yibal and Lekhwair fields, drilling most horizontal and deviated wells using slick bore motor, triple combo, ABI, AGS tools, running expandable casing, drilling with success Build up section in Nahr Umar shale formation with water base mud (XCD/Soltex), most of the wells drilled within 80% of the budget, zero LTI on the rig during this period.

-Jan 2001 to July 2002: Well control training centre SONATRCAH, Hassimessaoud, Algeria
Well control instrutor and IWCF practical assessor; trained 122 people well control preparation courses, trained and practical assessments for 56 people for the IWCF certificate with more than 85% of success.

-May2000 to Jan 2001: Well control training centre SONATRCAH, Hassimessaoud, Algeria
Trained and coached to be well control instructor and IWCF practical assessor by Mr Ahmed Alhilal Senior drilling instructor Aberdeen drilling school. Registration approved according to the IWCF-QA-RD2 form.

-Oct1998 to May 2000: Drilling supervisor SONATRACH oil company, Algeria
Drilling supervisor on the rig Enafor 6 Horizontal wells in Hassi Rmel field, using navigator and triple combo, doing geosteering horizontal section, improving the drilling program in Hassi Rmel field.

-June1998 to Oct 1998: Drilling engineer and supervisor: Yemen MAIFAIR Petroleum corp., Yemen
Engineering and planning for 2 exploration well (one wild cat ) for Yemen bloc 22, drilling supervisor on these wells, the first within 72% of the budget, the second wild cat with 104% of the budget, circulate out a kick and control the well with success (0.35 kg/lts over pressure ).

-Dec 1992 to May 1998: Drilling supervisor SONATRACH oil company, Algeria
Start as night drilling supervisor of 10 months after day supervisor in charge of wells in Hassi messaoud, TFT, Gassi, Stah fields vertical, exploration and Horizontal wells. Working from the begging of the campaign of horizontal wells in Algeria for Sonatrach, improving well to well the procedures and drilling program.

-1992 Drilling supervisor trainer SONATRACH & TOTAL ASSOCIATION
I received my drilling supervisor training working on Rig 06 as trainer coaching by Total drilling instructor, Courses in Sonatrach training centre held by Total Senior drilling instructor and passing all The Total drilling test M1, M2, FC1, FC2,PF1, PF2, FD,with mark between 82 to 96 %.

-1991 Scholar trainer BJ.SP Hassimessaoud, Algeria.
Working with the technical manager of the service company BJ. I completed several projects as part of my drilling engineer training.

-1990 Scholar trainer ENAFOR rig 08.
I spent several months working as a roughneck up to assistant driller. This was training to give me (hand on) experience with drilling operations.

QUALIFICATION AND PROFESSIONAL COURSES AND TRAININGS
-IWCF Surface BOP stack Certificate n: S28953/OM325/0084, on the 31st December 2003
PDO well control training centre Muscat, Sultanate Oman.
-Stripping Certificate from Pride Forasol training rig and centre on 1st December 2000
Lescar Pau, France.
-H2S Training and Certificate PDO training centre Fahud, OMAN.
-Environment awareness course PDO training centre Fahud, OMAN.
-On scene commander PDO training centre Fahud, OMAN.
-DIMS 32 PDO training centre Muscat, OMAN.
-Stuck pipe Course PDO training centre Muscat, OMAN.
-Under balance drilling training, Weatherford Hassimessaoud Algeria
-Advanced drilling technologies course Aberdeen drilling School, Aberdeen, UK.
-DIMS/Well plan/Compass/check stress courses Landmark Hassi messaoud Algeria.
-Bit technologies and design Hughes training centre The Woodlands, Houston, USA.
-Houston engineering equipments design and application, Hassimessaoud, Algeria.
-Total oil comp drilling supervisor training courses package Hassimessaoud, Algeria

EDUCATION
-1986 - 1991 University of Algiers. Institute of hydrocarbons, Boumerdes
Degree: Drilling and Petroleum Engineer

1983 - 1986 Institute of Lycee de Ghardaia
B.Sc.Mathematics.

References
Available on request

Languages
I am fluent in English, French and Arabic.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6635)

Go to Search Parameters...

Brief Description

I have had and developed more skills and experience to date in seismic interpretation (specifically on softwares, petrelTM and kingdom suite). My training period as an Intern and my MSc has afforded me practical experiences in seismic data acquisition and processing.

Senior Geophysicist, Petroleum Negotiator

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Civil Engineering and design, Underground piping design, PDS, microstation,navis works, SPR, hydraulic calcutation, foundation design, Autocad, Isogen, 3D modelling

I am international certified of Welding Engineer & ISO 9001/2000 with Naval Architect engineer background; almost 7 years experiences in Oil and Gas as Welding Engineer.

5 years engineering experience in oilfield development and 2 years on-site production operating experience; work included budgetary and production planning and forecasting • Work Over • negotiating and monitoring contracts • scientific data processing and analysis

M.E (Energy Engineering) Integrated graduate professional. Successfully completed various academic projects such as Harmonic Analysis & Suppression using Discrete Wavelet Transform and Embedded systems based programmable Wireless Control Unit. Adept knowledge in Electromagnetic field, Electronic cir

A committed and dependable team player with extensive offshore operations/commissioning experience and onshore construction / commissioning experience

Expertise in sizing, correct selection, design base document, specifications/data sheets, material requisition for inquiry/purchase, technical & commercial evaluation & recommendation, design review & approval and witnessing tests of Rotating Equipment (Gas / Steam Turbines, Positive Displacement

Reservoir simulation, welltest (onsite support & interpretation).

Mech. Engineer & MBA with over eight (08) yrs of exp in Project Marketing. Engaged in BD activity for Process Package/ Eqpt required in Offshore/Onshore projects of Oil & Gas Sector with full exposure to Separation Eqpt, Process Heaters, Electrostatic Emulsion Treaters, Glycol Dehydrator, FG Skid.

I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.

Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

project and process engineering, erection and commissioing, trouble shooting, apicodes , hazop and iso.

A qualified and experienced in pipeline engineer work on many EPC projects. Qualified to work on projects from the FEED studies, feasibility study, detailed design and engineering phases to full site management engineering of onshore oil & gas upstream facilities.

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.

I am experienced subsea control engineer,field service engineer and an instrument engineer, I install,configure and commission control systems

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Mechanical Maintenance Engineer/contract and Procurement Engineer

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out