Resume - Mechanical engineer with fourteen years of international experience in engineeri...

Misco Jobs

Resume #23968

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

SENIOR MECHANICAL ENGINEER 2005 - present
WORLEY PARSONS MEG, EPC Company, Calgary, Canada

Heavy Oil Project-Cristina Lake Phase 2B–Client MEG Energy
35,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – design and construction of Central Process Facility
* Responsible for commercial tenders and bid evaluations
* Preparing supporting commercial and technical tender documents for Dehydrators, Pressure Vessels, Steam Separators, Filters
* Developing of design datasheets and technical specifications
* Preparing requisitions for quotation, bid evaluations and requisitions for purchase order
* Reviewing Vendor's calculations, drawings, fabrication procedures
* Inspecting during production in Vendor's shops
* Pressure Vessel Design, ASME VIII Div 1 Calculations

Heavy Oil Project-Client North American Oil Sands Corporation (STATOIL)
10,000 BPD Commercial Demonstration Plant - Phase 1, SAGD – design of pipeline network and Central Process Facility
* Preparing supporting commercial and technical tender documents for Static Equipment (Dehydrators, Pressure Vessels, Slop Treater, Separators, Filters)
* Developing of design datasheets and technical specifications
* Preparing requisitions for quotation, bid evaluations and requisitions for purchase order
* Participating on model review
* Reviewing Vendor's calculations, drawings, fabrication procedures
* Inspecting during production in Vendor's shops
* Pressure Vessel Design, ASME VIII Div 1 Calculations

Heavy Oil Project-Cristina Lake Phase 2–Client MEG Energy
23,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – development and design of pipeline network and Central Process Facility
* Preparing technical tenders
* Responsible for commercial tender documents review and evaluation
* Identifying suitable equipment supply vendors and providing information packages to obtain prices to support bid evaluation
* Developing manufacturing concepts and selecting, purchasing and expediting components that meet the project expectations, specifications, budgets and schedules.
* Preparing supporting commercial and technical documents for Oil Dehydrators, Heater Treaters, Free Water Knock Outs, Steam Separators, Drums, Scrubbers, Heat Exchangers, Filters
* Maintain accurate and strict control of project documentation, budgetary and firm cost estimates
* Ensuring that project documentation and related reference information is provided to the Engineering Manager and that the project successes and failures are documented so that future designs can be standardized and improved.
* Pressure Vessel Design, ASME VIII Div 1 Calculations
* Reviewing Vendor's design, stress analysis

MECHANICAL ENGINEER 2004 - 2005
ACRES PARSONS E&C, EPC Company, Calgary, Canada

Heavy Oil Project-MacKay River 2–Client PETRO CANADA
40,000 BPD Commercial Plant, Steam Assisted Gravity Drainage - Conceptual engineering and cost study
* Preparing design technical specifications for Dehydrators, Steam Separators, Tanks, S&T Exchangers
* Identifying suitable equipment vendors and preparing requisition packages to obtain budget prices
* Reviewing and clarifying bids
* Preparing technical and commercial evaluations and reviewing them with client

Heavy Oil Project-Surmont Phase 1-Client CONOCO PHILLIPS
25,000 BPD Commercial Plant, Steam Assisted Gravity Drainage – development and design of pipeline network and Central Process Facility
* Preparing technical tenders
* Developing of design datasheets and technical specifications for specific equipment.
* Preparing supporting commercial tender documents for Treaters, Free Water Knock Outs, Pressure Vessels, Steam Separators, Tanks, S&T Exchangers, Scrubbers, Centrifugal Pumps and other packages
* Identifying suitable equipment supply vendors and providing information packages to obtain prices to support bid evaluation
* Reviewing technical and commercial evaluation with Client
* Preparing requisitions for purchase
* Inspecting during production in Vendor's shops
* Reviewing Vendor's calculations and drawings
* Pressure Vessel Design, ASME VIII Div 1 Calculations (COMPRESS)
* Shell & Tube Exchanger Design TEMA

MECHANICAL ENGINEER 2001 - 2003
MAXFIELD, Manufacturing Company, Crossfield, Alberta, Canada

Refinery expansion project, Regina – COOP
* 2001-2002 - Engineering and Design of Process Towers and different Pressure Vessels for the CO-OP Refinery in Regina
* Pressure Vessel cost estimate

Refinery expansion project, Burnaby – CHEVRON-TEXACO
* 2003-2004 - Engineering and Design of Process Towers for the Expansion of the Chevron Refinery in Burnaby

Other duties and responsibilities
* Responsibility for the development and implementation of engineering solutions for assigned engineering projects to meet customer specifications
* Pressure Vessels design, ASME VIII Div 1 (COMPRESS )
* Pressure Vessel cost estimate
* Designing and fabrication of LPG & CO2 Storage vessels, Custom process vessels, Production testing vessels, Flare knock out drums, Process columns and towers, Ammonia storage vessels
* Designing and fabrication of Process piping, Vaporizer packages, Pump and Compressor packages, Large diameter pipeS
* FEA stress analysis (ALGOR)
* Contacting the Clients to clarify technical information and specifications
* Following the productions process in the shop; changing and revising drawings, etc

MECHANICAL ENGINEER 1998 - 2001
HOFFMANN, Manufacturing Company, Slovakia / Germany

* Responsible for leading a project design team from early conceptual design through detail design, integration and test
* Estimating and maintaining effective control of project and product cost
* Clarifying technical information with client
* Designing heavy structural components, pressure vessels, tank trailers, semi trailers, B-trains
* Performing stress analysis, FEA
* 1999/2000 - Engineering supervisor in cooperation project with BELAZ in Belarus

MECHANICAL ENGINEER 1994 - 1998
GMV, Manufacturing Company, Slovakia

* Mechanical design related to new product development and product modification (Semi Trailers and Ship Containers)
* Reviewing and approving product drawings, drawing release packages, and drawing revisions
* CAD system administration - ACAD, SOLID EDGE
* Performing stress analysis, FEA
* Responsible for leading a project design team
* 1997- in charge of introducing systems of quality control ISO 9001 for the technical department

EDUCATION

MASTER'S DEGREE IN MECHANICAL ENGINEERING–
Technical University, Kosice, Slovakia 1987 - 1992
* Faculty of Mechanical Engineering
* Thesis Topic – Machines and Engineering Production Devices
* State examinations – Essentials of Construction of Production Machines, Elasticity and Strength of materials, Stress analysis, Mechanical and Automated Production Machines

TECHNICAL SKILLS SUMMARY

* Strong work ethic, reliable and honest, flexible and adaptable in team working as well as individually
* Registered as Professional Engineer of Alberta (APEGGA)
* Ability to work under time constraints and to adapt to change
* Working knowledge of manufacturing and assembly process
* Extensive shop experience
* Vendor package data reviews
* PFDs / P&IDs review
* Technical and commercial evaluation
* Management and quality control ISO 9001
* Design software - SOLID EDGE, INVENTOR, ACAD, MECHANICAL
* FEA stress analysis - ALGOR
* Design and stress analysis - COMPRESS (Pressure Vessels)
* Languages: Slovak, English, Russian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 7051)

Go to Search Parameters...

Brief Description

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

Workover & completion supervisor

Over 20 years of experience in Plant Operations or Maintenance.

I possess over 15 years’ of experience in Project Management, Instrumentation & Automation, Operations & Maintenance, Installation & Commissioning and Man Management.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Instrument Engineer/Inspector

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Welding Engineer Specialist

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Over 12 years experience in oil and gas industry

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out