Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #24112 next resume »»
CONTACT INFORMATION:
View contact information...

Summary
14 Years experience in Gas and Oil Processing Industry – Instrumentation department: measuring and adjustment gas stations; pump stations; compressors stations; air stations; cooling towers; demin plant; water wells; power plant; condensate stations; measuring and adjustment equipment of control PLC's / DCS's controlling pumps and compressors-PLC's programming, Hart Protocol communicator and Modbus communications. Electronic & Pneumatic Transmitters & Controllers, Control Valves, Safety Valves, monitor & control Loops, Mimic & Alarm Panel, ASD, PSD & ESD Systems, Signal Converters, Pressure Switches & Gauges & other Measuring & Control Instruments, alarm and process; pressure recipients; dosing systems; storage tanks; distribution pipeline systems for air, drink water, industrial water, treated water, superheat steam, condensate and natural gas.

Career history and work experience
2005 March. - Till present SABRATHA PLATFORM ENI GAS B.V. Libyan Branch – Off-shore
Position- Instrument Engineer: – Commissioning, Handover & Start – Up and 6 months maintenance

- Prepares the weekly work order schedule and co ordinates with engineering department in conformity with planning schedule give by the Planning Project;
- Manpower and Material Budgeting, cost control and extra work claims with Primavera (basic knowledge);
- Prepares the material and manpower requirement plan, make-out the all modifications bring of systems in site or LQ, with WinPCS "A" and "B" check sheets and up-date the drawings in conformity with site situations. Make – out the work permit (Electrical Isolation Certificate, Hot Work Permit and Cold Work Permit to E/R Department, Entry into Confined Spaces) to instruments technicians teams what are his on site to resolve the task day give to them.
- Prepares the day, weekly and monthly progress report and sign all the sheets with the Client based on specific procedures to all systems like Sea water and cooling water, Drinking and service water, sewage, Open Drain System, Offshore Integrated Automation System (IAS) commissioning of the IAS system based on the IAS vendor (ABB) test procedures listed in the DCS Site Acceptance Test (SAT), Diesel Oil System Offshore, Offshore navigational aids system, HVAC LQ and Deck HVAC, Fire and Gas Detectors system, and all the systems on this gas platform in totally is 51 systems that each have one or twenty subsystems all instruments on the platform are approximately 2000 transmitters and instruments all of kinds ;
- Prepares the extra work claims and reimbursement.
- Co ordinates with sub contractors and monitors the progress;
- Prepares and issues the Job cards using HMS (Hook Up Management System) and also make the punch list and give to HHI Instrumentation department to remedy all the problems observe in site on;
- Prepares the detailed day-to-day Hook up activities and commissioning activities;
- Prepares RDA (Request for approval) for purchases and forwards to purchase department.
- Offshore commissioning procedure checks to be carried out are:
* Verify all items fastened or removed for sea transportation have been correctly re-instated, and all equipment preservation activities have been removed as required.
* Verify construction completion of specified activities in accordance with ENI GAS BV standards and specifications as per Material Requisition and any incomplete work.
* Any outstanding items identified on the onshore AC1 certificate included in the Completions Dossier are to be agreed and the additional work incorporated in the Commissioning Procedure work scope.
* Identify all required temporary facilities for the offshore commissioning of the system.
* Review hand-over documentation for the sub-systems described in this procedure to determine the extent of testing/re-testing required for offshore commissioning.
* Prepare and complete tests.
* Hand-over system for Operations.

2005 Jan. – 2005 Feb. SABRATHA PLATFORM ENI GAS B.V. Libyan Branch – Off-shore
Position: -- Instrument Engineer – Precommissioning, commissioning and Hand-over

-Performance of loop test, troubleshooting, re-configuration and re-calibration for Automation Equipments.
-Precommissioning, commissioning and handover the all instruments and control equipment on the platform in conformity with P&ID'S and construction project, together with contractor witness.
- Verifying and programming PLC's Allen Bradley, supervise all equipment installations, like safety and process valve SEVERN GLOCON with pneumatic positioners SIMENS, ESDV (emergency shut down valve), SDV (shut down valve), BDV (blow down valve) all with LCP BIFFI, solenoids ASGA and Motorized operating valves (MOV) with Icon 2000 electric actuator, WIKA gauges.
- SIMENS turbine generators double fuel control by MARK 2, configuration (hardware, power supplies, emergency stop loop, DC lube oil pump control and terminal layout), control hardware with card configuration, I/O function, over speed and watchdog systems, maintenance terminal with access, the RP2 menu structure and system parameter adjustment, control mimics and annunciation messages and all the fault findings tools.
- Programming and configurations ABB DCS I/O cards (together with representative delegate) configuration based on cause – effect diagram or false – true diagram, with Tenore Platform using friendly interface Microsoft Windows 2000 Professional NT Server to operate the all systems and units, verifying correct connections and terminal strip in marshalling cabinets and ESD marshalling cabinets in conformity with wiring diagram and control loops diagram.
- Verifying measure and protection equipment for vibrations and axial displacement BENTLI NEVADA and blocking and alarming panel Yokogawa for Gas Compressor MP/LP NOVO PIGNONE, with all transducers, ROSMOUNT, pressure transmitters Hart protocols 2088 series, dP level transmitters 3051, and 1151, vortex flow, KHRONE flow transmitters, HONEYWELL pressure transmitters, RTD and the others flow, pressure and level transmitters also SMART transmitters with HART protocol those are ABB products 1600T Series and 2600T Series, FOXBORO transducers;
- MEG and TEG unit with dosimeter pumps PERONI & LEWA, counting cubical BIFFI (MIDLAND – ASGA);

2004 Nov. – 2004 Dec. SABRATHA PLATFORM ENI GAS B.V. Libyan Branch – Off-shore
Position: Senior Instrument Technician – Hook-up and Precommissioning;

-Performance of loop test, troubleshooting, re-configuration and re-calibration for Automation Equipments.
- Supervise all instruments to be mounting in conformity with the drowings and check all the continnuity between field transmitters and JB after that JB and marshalling cabinets;
- Mounting and adjusting SIMENS, ABB, current to pneumatic converters; SIMENS pneumatic positioners; reducing pressure regulator self-contained; level transmitters ABB, ROSEMOUNT, FOXBORO local control loops using HART COMMUNNICATOR 375; pneumatic transmitters and controller; FOXBORO, MASONEILLAN and KHRONE flow, pressure and level transmitters, FOXBORO, ABB, ROSEMOUNT, temperature adapters;
-Verifying resistance temperature detectors (RTD) and thermocouples, mounting and connect field wiring and compensation cable to the terminal board.
- Supervise the correctness of mounting and all to be in conformity with the drowings, all the cables trays in field in also LQ, HVAC1 and HVAC2 deck, MER (MAIN ELECTRICAL ROOM), EER (EMERGENCY ELECTRICAL ROOM) and also in marshalling cabinets, correct mounting of glands and labels to terminal strip

2004 Jan. – 2004 Nov. Rafiserv Petrobrazi S.A. Ploiesti – Romania
Position: - Chief Inspector Engineer – Instrumentation & Electrical Department QA/QC

Technical Survey for revamped Petrobrazi Petrochemical Company
-Ensure that contractors install, test, pre-commission and commission the E&I system (instruments and control system like SCADA, PLC, DCS HONEYWELL, EMERSON DELTA V ICS NETWORK, GENIUS and supervise configuring data to DCS / PLC software and diagnostic and others) in accordance with the drawings, specification and procedures of QC.
-Conformity asset between site situations revamped the CCR II plant (Catalytic reforming II) and mounting documentation;
-Coordinating maintenance and repair activity according to the program at shift for plants: Pyrolys, Polypropylene, Catalytic Cracking, Coking, Atmospheric and Vacuum Distillation, Gasoline, Gas Oil and Kerosene Hydro fining, Catalytic Reforming, Thermo-Electric Power plant, Air Compressors and Gas Recovering Compressors.
-Monitor the schedule for production of his discipline's TPD documents to ensure conformance to overall contract schedule and to ensure all necessary discipline documents are complete.
-Approves and review B documentation and comments on A Documentation;
-Coordinate and respond to all technical queries related to instrumentation and respond accordingly.
-Analysis cost/benefit as when necessary to assist in whole of life economics. Review the Contractors recommended suppliers with special attention to the quality of materials in the contract.
-Conduct the surveillance inspection to ensure that all Electrical and Instrumentation site works are carried out in accordance with the specification, drawings and procedures.
-Inspect the Work performed by CONTRACTOR based on the quality of work, which is measured by compliance with the specifications, procedures QA/QC, codes and standards.
-Co-ordinates and monitors the site activities of E& I system - Starting operations (connecting UPS to Operator Station, Application Server, Control Stations, Terminal server, Fail Safe Controller, turning on I/O modules, Communication Modules, etc) into HONEYWELL DCS panels.

2003 – 2004 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery - Romania
Position: - Control Room Instrument Engineer Supervisor

Compressors operating engineer for Petrobrazi Power Plant – Catalytic Cracking
-Experience with Gas Turbines, steam Turbines, including compressor using DCS control systems
-Plant experience including fuel handling, working knowledge of power cycles
-Experience with multi-unit operation and maintenance
-Performing Preventative Maintenance functions on the plant equipment
-Working with Speedtronic GE Mark V Gas Turbine Control System using: Rosemont smart transmitters, Honeywell Flame Monitor System, MOOG electro hydraulic servo valves process gas and compressor antisurge system.
-Performing light mechanical maintenance tasks
-Performance of loop test, troubleshooting, re-configuration and re-calibration for Automation Equipments.
-ABB Distributed Control System using: Honeywell, Foxboro, Micro Motion and Tokyo Keiso smart transmitters, Fisher Rosemont Electro to pneumatic transducers and positioners, BIFFI and Vanessa Motorized operating valves (MOV) with Icon 2000 electric actuator.
-Honeywell (FSC) Emergency Shut Down System using Honeywell smart transmitters Tokyo Keiso level, pressure switches and Emergency Shut Down valves BIFFI with pneumatic actuator and solenoid valves.

2002 - 2003 Rafiserv Petrobrazi S.A. Ploiesti - Romania
Position: - Technical Inspector (electrical and instrumentation)

Technical Survey for Petrobrazi Petrochemical Company
-Monitoring contractor's performance including vendor shop inspections, receiving inspections, and detailed inspection of construction practices and details;
-Reviewing design specifications and assisting with bid evaluations;
-Conformity asset between site situation and construction documentation;
-Verifying economical documentation from work quantity and materials point of view;
-Recording technical data from the work site.

1999 - 2002 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery - Romania
Position: - INSTRUMENTATION DEPARTMENT COKING III Plant - INSTRUMENT SPECIALIST
-In charge of repairing, maintaining and configuring: YOCOGAWA YS150 controllers, ASAHI KEIKI digital meter-relay, ASAHI KEIKI power sources, BARBER COLLMAN, CESSEL recorders, FOXBORO, ASAHI KEIKI temperature converters, square root elements, ratio elements, add-subtraction elements, MASONEILLAN, GEK-ELLIOT, BAILEI, transducers, using MICROCAL 1000 High Accuracy Multifunction Calibrator.
-Ensuring the suitable functioning of instrumentation for, steam turbine compressor including, new implementation of the video recorder receiver FUJI and EUROTHERM to the transmitters.
-Configuring pressure and differential pressure smart transmitters (HONEYWELL made) with dedicated communicator (STS 103). Verifying transmitters and connecting them to a Distributed Control System HONEYWELL.

1998 – 1999 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery – Romania
Position: INSTRUMENTATION DEPARTMENT Catalytic Cracking Plant - ELECTROMECHANIC

-Precommissioning, commissioning and start up Catalytic Cracking Plant, CO Boiler, and DRESSER compressor as concern the instrumentation and control equipment, together with American and British specialists.
-Mounting and adjusting FOXBORO current to pneumatic converters; FISHER pneumatic positioners; reducing pressure regulator self-contained; level local control loops using TAYLOR pneumatic transmitters and controller; FOXBORO, MASONEILLAN and HITACHI flow, pressure and level transmitters, FOXBORO temperature adapters; HOKUSHIN signal discriminators.
-Verifying resistance temperature detectors (RTD) and thermocouples, mounting and connect field wiring and compensation cable to the terminal board.
-Verifying measure and protection equipment for vibrations and axial displacement BENTLI NEVADA and blocking and alarming panel HITACHI for Gas Compressor and Steam Turbine. Mounting, verifying and simulating, the process conditions for a PLC for Gas Oil Hydro fining plant DRESSER compressor.
-Starting operations (connecting UPS to Operator Station, Application Server, Control Stations, Terminal server, Fail Safe Controller, turning on I/O modules, Communication Modules, etc) into HONEYWELL DCS panels.

1997 – 1998 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery – Romania
Position: INSTRUMENTATION DEPARTMENT Purging Plant (ECBAR) – ELECTROMECHANIC
-Ensuring the suitable functioning of instrumentation new furnace cyclone and rotary, maintenance equipment in good condition, repair activity according to the program.

1996 – 1997 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery – Romania
Position: INSTRUMENTATION DEPARTMENT Fire and Gas Alarm Analysis – ELECTROMECHANIC
-Maintenance, normative compliance verification and fixing the gas analysis FOXBORO, HONEYWELL with gas detectors, ensuring the suitable functioning of instrumentation for the entire enterprise.

1993 – 1996 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery – Romania
Position: INSTRUMENTATION DEPARTMENT Charging, Expedition Petroleum Products – ELECTROMECHANIC

1.Charging the petroleum liquid in to the CF tanks and the pumps stations (white and black liquid):
-Mounting and adjusting PHILIPS weight systems and executing repairing operation for the electronic equipment and devices (all charging systems, including the pneumatic converters, electric – pneumatic positioners and to weigh systems of the CF tanks to weighting devices).
2. Charging the gas petroleum liquid in to the CF tanks and pumps station gas to SHELL Gas Plant ( gas cylinder butane, methane, ethane, and others derivative):
-Commissioning and start-up the new Charging Liquefied Gas Plant in CF liquid gas tanks and resolve and repair the all errors appears to the charge process. Verifying measure and repair equipment from measurement systems to the sphere tank gas.
3. Torch Retrieving Gas Plant (RGF) with the kerosene tanks retrieve of all Refinery Plant:
-Executing repairing and adjusting operation for the electronic equipment existing to the Gas Compressors: temperature adapters, compensators and automatic bridges, temperature controllers, logo meters, analogical and digital temperature indicators, pressure, differential pressure and level transmitters.

1991 – 1993 S.N.P PETROM S.A.Bucharest PETROBRAZI Refinery – Romania
Position: INSTRUMENTATION DEPARTMENT MECHANICAL Charging, Expedition Petroleum Products - LOCKSMITH

-Mounting adjusting tighten valves, regulators valves, electric to pneumatic converter, flow, level and pressure transmitters HOKUSHIN into Petroleum Liquid Deposit Plant, Charging, and Expedition Petroleum Products Plant.

SUPPLEMENTARY ACTIVITY'S________________
* Experience like Electrical Inspector Engineer;
* Experience like Safety Officer / Safety Engineer and Safety – Instrumentations and Electrical Department and general knowledge for the other dept's.
* QA/QC good knowledge
* Drawing out documentation „As built" type, „Work-Permit's System" knowledge.
* Foreign languages: English – very good
French – good
Italian - basics knowledge

* PC knowledge: 1. - Software:
-Autocad 14/2000, Corel Draw, Microsoft package Office: Word, Excel, Power Point, Access, C++, FoxPro, Visual FoxPro, and others.
2. - Hardware:
- Executing repairing and adjusting operation for the all electronic equipment and compatibility with the parts to made the new Pc.
* Driving license: Category B

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1251 to 1300 of 6511)Go to Search Parameters...
Brief Description
I am a Mechanical Project Executives around 7-1/2 years of experience in the field of Project management, Construction of Offshore structures & pipelines, Oil & Gas, and mechanical structures
A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.
NDE Project Manager, III Ultrasonics ASNT/ACCP/EN473, Phased Array, TOFD, API 510 (lapsed), CWI (lapsed)
Results-oriented Petroleum Engineer with 17 years experience in the International Oil Industry with an in-depth technical appreciation of production practices.
Canadian Citizenship, twenty-year work experience in the oil/gas and mining industry with very strong skills in geology and geophysics, reservoir management, Development and Production and production engineering. Very proficient in computer software applications for resources estimation, project eva
Piping &pressure vessel design
Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry
I am M.Tech and got 13 years of experience in the field of process automation & controls
Mechanical Field Service Technician
Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.
Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.
I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia
Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.
Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)
14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.
5 Years of Digital DCS Control systems erection ,testing and commissioning experience.
NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.
M.Sc Petroleum Engineering, 28 years experience as Drilling Fluids/Mud Engineer and Reservoir Engineer
Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical
Rotating Equipment Supervisor
IT/PC Technician
Seimec mechanic
Offshore design and project management
Safety Technician offshore/oil and gas.
I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w
Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working
Oil & Gas production optimization, Artificial Lifting, Workover, Completion, Nodal Analysis, Stimulation, Simulations.
More than 10 year’s progressive experiences in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Pipeline Coating, Pipelines Installation (Offshore) Platform Modification (Offshore) Refinery and Pressure Vess
i am a chemical engineer and i have a diploma in petroleum industrilization engineering.my expeierence concerning in oil and gas services such as well-testing, wellhead maintenance, pressure vessels inspection, tanks desludge and cleaning operations, well testing equipments modifications...
Material Controller
Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards
Operation, Maintenance, and troubleshooting of Reciprocating, Flotronic, Screw & Scroll Chillers.
Awarded degree with M.Sc. in Polymer Chemistry with basic degree in Chemistry background, aspiring for a suitable position which offers professional contribution and self development with my area of interest in Research and Development and Quality Control department.
Design, maintenance of process Instrumentation
Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8
I worked for construction of grid sub stations, designing of house wiring, panels designing etc
Mud Engineer (senior) experienced motivated ready to relocate works anywhere
Seeking challenging job in power/Gas/Oil and desalination plant to utilize more than 23 years of experience as senior commissioning engineer, operation engineer, shift operations superintendent, and equipment conditioning & performance engineer of Rotating and Static equipment of thermal power plant
Extensive experience in managing complex construction and service projects with the knowledge to balance the requirements for functionality, quality, timeliness, and safety.
Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, UK, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration venues: prospect generation & new ventures evaluation
Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer
University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox
Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.
* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.
A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.
To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.
I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.
Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.
Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.
HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   [ 26 ]   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com