Resume - HSE Engineer

Misco Jobs

Resume #24150

CONTACT INFORMATION:
View contact information...

Designation: Health, Safety and Environment Engineer

EDUCATION:
2000 Bachelors of Engineering.
Civil and Environmental Engineering
American University of Beirut, Lebanon.
2004 Masters of Engineering.
Environmental and Water Resources Engineering
American University of Beirut, Lebanon.

SUMMARY:
Three years of HSE experience in the fields of Oil and Gas onshore construction and engineering design within the Caspian, Middle East and Gulf regions. Two years performing advanced environmental research at the Environmental and Water Resource Engineering Department at the American University of Beirut.

* Petrofac International Ltd. *
HSE Design/Construction Support Engineer

May 15th (2004) - to date:
Sharjah, UAE
Mitigation of NGL Plant Flares Quatar Petroleum (QP)
Preparation of the Environmental Management Plan, Waste Management Plan and Environmental Emergency Response Plan in addition to a number of project specific environmental procedures. Experience with the State of Qatar's National Environmental Legislation & Regulations and Qatar's Supreme Council for the Environment & Natural Reserves (SCENR).

May 15th (2004) - to date:
Sharjah, UAE
Replacement of NK Crude Oil Export System; Kuwait Oil Company (KOC).
Supervision of project EIA report preparations, including field baseline studies and data modelling and assessment. Experience with Kuwaiti National Environmental Legislation & Regulations and the Kuwaiti Environmental Protection Agency (KEPA).

May 15th (2004) - to date:
Sharjah, UAE
Gas Sweetening and Sulphur Recovery Unit; Crescent Petroleum Company.Preparation of Construction Environmental Management Plan, Waste Management Plan, Emergency Response Plan, and Incident Reporting and Investigating Procedure. Aiding in the maintenance of onsite HSE management system. Experience with UAE Environmental Legislation & Regulations and the Federal Environment Authority (FEA).

May 15th (2004) - to date:
Sharjah, UAE
Kashagan Development Experimental Program; Agip KCO.Preparation of Consequence Modelling Report including fire, flammable and toxic gas dispersion, and explosion consequence analysis. Preparation of Evacuation, Escape and Rescue study.

May 15th (2004) - to date:
Sharjah, UAE
Gap Analysis - Selection of Statoil's Governing Documentation; Statoil (Norway)Comparison of Statoil design and construction corporate documentation in the areas of safety, health and environment to corresponding international best-practices for onshore oil & gas production facilities in the Middle East region.

Environmental Compliance Officer
July 1st (2004) - September 19th (2004):
Tbilisi, Georgia
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Preparation of project environmental claim regarding non-compliance issues in relation to waste management, on site monitoring, KPI targets, document approvals, and various other non-contractual environmental obligations imposed on Contractor.

Field Environmental Coordinator
July 15th (2003) - May 15th (2004):
Tbilisi, Georgia
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Central coordination of environmental reporting activities including weekly reports, monthly reports, KPIs, NCR/CAR, monitoring data, waste numerics, incident reports and other reporting as necessary under the Environment Management System.

Field Environmental Engineer
April 5th (2003) - July 15th (2003):
Tbilisi, Georgia
Baku, Azerbaijan
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Aiding in the preparation and implementation of the Reinstatement and Landscape Management Plan, Pollution Prevention Plan, and Waste Management Plan for the Construction phase of the project. Setting up, and maintaining the environmental monitoring, procurement and training programs.

HSE Design Engineer
August 17th (2002) - April 5th (2003):
Sharjah, UAE
Project for Dorood Onshore Facilities, Iran; TotalFinaElf. Performing flare dispersion and radiation modelling. Preparation of HAZID, HAZOP, ENVIID and HAZCON procedures. Sitting in as the HAZOP scribe.

* American University of Beirut *
Research Assistant
February 15th (2001) - August 15th (2002):
Beirut, Lebanon
Performing research related to industrial waste management, water and wastewater treatment processes, wastewater reclamation practices, development of natural resources within an economically sustainable framework, and the use of alternative fuels. Experience with Lebanese National Environmental Legislation & Regulations and Lebanon's Ministry of Environment.

Graduate Assistant
September 5th (2000) - February 15th (2001):
Beirut, Lebanon
Lecturing and proctoring of Hydraulics lab course. Assisting with advanced water and wastewater treatment courses.

AWARDS AND SCHOLARSHIPS:
Full scholarship granted by AUB throughout the two years of the ME degree (2000-2002).

University Research Fund granted by AUB for work on Master's thesis. Thesis involved a wastewater reuse and reclamation management plan for the coast of Lebanon. The management plan included an integrated wastewater management computer model.

The Abd El Aal Research Award granted as further funding for continued work on Master's thesis.

PUBLICATIONS:
"Potentiality of Wastewater Reclamation and Reuse in the Lebanon" published in the International Journal of Environmental Pollution.

COURSES AND TRAINING:
BP Environmental Competency Training Course for the Baku-Tbilisi-Ceyhan Pipeline Project.
BP Environmental, Social and Cultural Heritage Training Course for the Baku-Tbilisi-Ceyhan Pipeline Project.
RWTUV ISO 14001:1996 EMS Awareness Course.
RWTUV OHSAS 18001:1999 Safety Awareness Course.

COMPUTER SKILLS:
Extensive Microsoft OFFICE skills, including building databases and programming within Access and Excel frameworks. STELLA, model building software. ADMS, CIRRUS and FRED consequence modelling and flare dispersion and radiation modelling softwares. PHAworks, for conducting HAZOP studies. Visual Basics, AutoCAD, and ESRI Arc Explorer GIS software.

LANGUAGE SKILLS:
Arabic: Native
English: Fluent
French: Good

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5551 to 5600 of 6411)

Go to Search Parameters...

Brief Description

Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.

Quick learning capabiliy of any hard assignment. Objective: To work hard for a long-term position in a reputed organization that provides healthy and challenging environment, where I can utilize my skills, professional experience and educational backgrounds to benefit mutual growth and success.

Service Support/ Product Support Heavy Equipment Maintenance Manager

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

I am a recent graduate mining engineer that possesses the following skills: analyzing complex numerical information, working enthusiastically and productively under pressure, dealing professionally with teammates, and working efficiently in a variety of teams and on my own initiative.

Civil-water resources-water distributtion- pipe - sewer design-hdrology-awards-high computer skills

Chemical Engineering 5 years degree with Production Management specialization

Chemical engineer with more that 6 yrs of experience in the field of process and projects

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.

Chemical Engineer from Indian Institute of Technology(IIT)-Delhi

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

HSE advisor to the upstream oil & gas industry with 13 years experience in Australia, Russia, Nigeria and the Middle East.

Chemical Engineer with Environmental Engineering experience

Results Driven Project Manager w/16yrs Industry Experience. Master of Civil Engineering/BSc Petroleum Engineering/Certified PMP/EPC Management/AFE Management/Contracts Review/Risk Analysis/Global Client Experience/Global Team Development: Lead by insistence on personal accountability and growth.

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased

Senior Mechanical Engineer, Bachelor Of Engineering

I write to you seeking QA/QC Engineer’s position ( NACE Level II Sr. Coating Inspector & NACE Corrosion Technician ), which can utilise my experience in Quality Assurance, Quality Control and Operations field in coating Industry. In this context, I enclose my resume for your consideration.

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

Experienced heavy duty mechanic. Worked in workshop and field service. Managed workshop and fleet of field service vehicles. Engineering experience include testing and reporting on ADT’s. Currently employed by Bell Equipment Co. (Hitachi AH500 – AH300). Got experience on lots of different machines

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Cwi/QA/QC Manager

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

MWD / LWD Field Service Engineer . Versed in all Positive Mud Pulse, Electro-Magnetic (EM), Wired Pipe Technology (IntelliServ), MCLS, MWD probe and collar based tools. Knowledge of Directional Drilling principles, and downhole vibration management.

Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Mineral Processing Engineer with in-depth knowledge and hands on experience in Analytical Laboratory Operations; Metallurgical Unit Process Operations

I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.

HSE Engineer

Proposals & Contracts, Commercials, Process & Technologies, Project Management

Project Management / Engineering Coordination / Process Engineering / Business Development

EE + Internatianal contracts egotiatins from proposal to contract concluding.

QUALIFICATION: DIPLOMA IN CIVIL ENGINEERING, GIS CERTIFICATE FROM JNTU UNIVERSITY, EXPERIENCE OF 7 YEARS IN DGPS TRIMBLE 5700, LEICA 1200, AUTOCAD2006

BSME Mechanical Engineer

Instrument Engineering, Calibration, Testing, Installation, Commissioning, Maintenance, Familiar with control systems like DCS/ESD etc. Familiar with Metering Systems

Over Four years of work experience as a Planning Engineer and one year as Maintenance Engineer. Superior Knowledge of Primavera 3.1, MS Project 2003/ 2007 and MS Office (particularly MS Excel) through proven experience in Project planning and intensive usage.

Experienced and hands on work on MTS, SEM, XRAY, Hardness, Optical Microscopy, Metallography, Lecos etc.

Civil Engineering, Piping Analysis Engineering

Senior Instrumentation & Control and Telecom-SCADA Engineer

ITI in Instrument Mechanic, diploma in Electrical Engineering 5th Sem, working in Procter & Gamble Company

First Prev 101 102 103 104 105 106 107 108 109 110 111 [ 112 ] 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out