Resume - Excellent oral and written communication ability. Computer literate, with profi...

Misco Jobs

Resume #2426

CONTACT INFORMATION:
View contact information...

PROFESSIONAL OBJECTIVE
Electrical engineering position for an ambitious and versatile individual where experience and education will be effectively applied to promote professional challenge and growth.

QUALIFICATIONS
* Results oriented professional with expertise in electrical engineering.
* Masters Candidate in Electrical and Electronic Engineering.
* Excellent oral and written communication ability.
* Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet,
* Programming languages Assembler, C and VHDL.
* Extensive use of laboratory test equipment including Spectrum Analysers, Oscilloscopes, Signal Generators, Modulation Generators
* Make sound decisions independently and under pressure of deadlines.

EDUCATION
University of Birmingham, Birmingham, UK.
Masters (MEng) in Electrical and Electronic Engineering and Management. Anticipated graduation - July, 2003.

2.4 GHz Broadband (DS SS) Receiver Project
October 2002 - Present
Involved in designing and implementing (on system level) a wireless 2.4 GHz broad-band receiver (RF of 2450MHz, IF of 374 MHz) for ISM, LAN and Bluetooth Applications. Main activities involved design, simulation, testing using laboratory equipment to evaluate results.

Management Project
October 2002 – Present
Involved in a project with Goodrich Aerospace on ways of improving Customer Service Levels and decreasing Stock Levels. Areas analyzed included forecast of intermittent products, Supply chain Management and TQM. The recommendations made have a potential of saving the company more than $1 million worth of stock.

3D Scanner Project
October 2000 – July, 2001
Worked in team of six to design, build and test a 3D high-resolution scanner (0.1mm), used for scanning cuneiform tablets of ancient times. This project was a success and a fully functioning scan was realized within time and budget.

WORK EXPERIENCE
Department of General Services July 2001 – Sept. 2002
Professional Services Branch, Electrical Engineering Unit, Sacramento, CA
Assistant Electrical Engineer (Intern)
* Worked closely with engineers, architects and other supporting disciplines in building services.
* Assisted in preparation and review of lighting, power and signal plans and specifications related to numerous State buildings.
* Gained invaluable experience and knowledge of design, research and development.

World Careers' Network (WCN), London, UK
March 2000 – March 2001
Student Representative (University of Birmingham)
* Management of day-to-day on-campus business for Internet-based graduate recruitment company.
* Administered budget.
* Organized career events both in and outside University campus.
* During this time, Birmingham University had the highest percentage of students using WCN for graduate recruitment purposes in Europe.

E3, University of Birmingham, Birmingham, UK
Sept. 1999 – July 2001
International Student Representative for e3.
* Organized and supervised Department student activities.
* Liaison between students and Department staff.

Rank Xerox, Kampala, Uganda
July – Sept. 1999
Trainee Technician
* Assisted Senior Electrical Engineers in in-house and call-out repairs for office equipment including fax machines, printers, scanners, copiers
* Assisted Works Controller in allocation of job tasks.

HONORS AND AWARDS
* Gold Certificate for Young Engineer's Scheme (A-levels) on Project to define a hydraulic rig with Rolls Royce.
* Full four-year government scholarship for being "Best Girl in Primary Leaving Examinations for Metropolitan Uganda" (1991-1995).

PROFESSIONAL AFFILIATIONS AND INTERESTS
IEE (UK), Student Member
Institute Of Management (UK), Member
Women in Science, Engineering and Technology (UK), Member

Areas of interest include traveling, camping, going to the gym, reading books, cinema.

REFERENCES
Excellent professional and personal references available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3401 to 3450 of 6411)

Go to Search Parameters...

Brief Description

Experience with CAD/CAE expertise.

A challenging position in an industrial setting that takes advantage of my experience in polymer science & rheology, reaction kinetics, surfactant chemistry, process engineering, modeling and simulation.

I have been in the Petrochemicals/Refinery Industry for more than 8 years now. And I have gained some knowledge and acquired experiences from the projects that I’ve worked with. From making isometric sketches, taking the materials take-off, handling an organized team to lead in assigned plant scope,

Surface controls system specialist with 12 years offshore experience.

Masters Degree Maintenance Engineering and Asset Management/ Experienced Condition Monitoring Engineer/Vibration Analysis/Rotating Equipment troubleshooting, repair, overhaul/oil analysis/ reliability improvement issues/ please see full CV for details

I am a Chemical Engineering Graduate with an Engineering Certification from the Robert Gordon University, Aberdeen via the Shell Training Programme, SITP/1. I work as a Petroleum Engineer in an Oil & Gas consultancy firm. I possess Business Development skills and an interest in Project Management.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries, in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction management.

7 years of experience in E & P business. Has extensively used Landmark data management and interpretation applications to solve geological and geophysical problems for the local and international clients.

In response to your ad on Internet, I am writing this letter to apply for full time Chemical Engineering position in your firm. Myself Sravanthi Ragireddy a Chemical Engineering Graduate student (Dec 2008) from LAMAR UNIVERSITY, Beaumont, Texas. I am very interested to discuss possible opportunities

Creative, Hard Worker, Have Initiative, Fast Learner, Curiosity, Enthusiastic & Computer Skills

M.E.(Process Instrumentation),automation

Recent graduate with an MSc degree in Oil and Gas Engineering and looking for a role where I could use the engineering knowledge and academic skills that I have gained from my MSc degree, and develop a long term drilling and well engineering career.

B.Tech from IITK, 4 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I have been working at Total E&P Indonesie as a Well Service Supervisor since 1998 until March 2006 (supervise slickline, well testing and maintenance, electricline (perforation and logging), snubbing unit and coil tubing unit) and as a Contract Workover Barge supervisor (with workover RIG) at CNOOC

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

PDS, Microstation, AutoCAD 2D/3D Piping Designer

B.Tech(Chemical Engineerin),Highly proficiency in english and management and Technical skills

Naval Architecture

B.E.& DIPLOMA IN MECHANICAL,EXPERIENCE IN CADCAM DESIGN,SHOP FLOOR MANAGEMENT,MAN MACHINE MANAGEMENT,ERP ENDUSER,INTERNAL AUDITOR ISO 9000,ISO 14000,ISO 18000,VENDOR DEVELOPEMENT

BE - ELECTRONICS & TELECOMMUNICATION , Fresher From MUMBAI UNIVERSITY

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

Analyzer Technician

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Dear Sir/Madam,

SEEKING A POST IN ESTEEMED COMPANY

I'm a competent and experienced pressure vessel & heat exchanger design engineer with excellent communication, motivational, organisational and interpersonal skills. An individual who possess a hands-on pragmatic approach to work, able to work alone or as part of a team.

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

CAN DO ALL TYPES OF MAINTAINENCE OF INSTRUMENTS,THEIR CALIBRATION,ZEROING,ERROR DETECTION ETC.

B.Eng in Metallurgical Engineering

Having 6months experience as instrument technician completing BE

Chemist/Lab technician

• Diploma with a total of 7 years experience in Construction & Maintenance of Plant Instrumentation systems from planning and scheduling to execution of the job.

I have 7 years experienc in oil &gas &power plant industry,my experienc is about piping engineer,i am experienced to work with pds software .i worked with 3 forign country(LINDE/TECHNIP/DOOSAN).

I'm a young and fresh graduate of geology from a reputable University in Nigeria Who loves to work in a challenging work environment where standards are high.

 Vessels, Pumps, Heat Exchangers and other Refinery Plant and BioDiesel Plant components representation in 3 Dimensional drawings using AutoCad 2004 before Plant Piping Design.

A sound technical chemical engineer with much back gound of marketing knowledge/ experience. Hence able to work techno-commercially

Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects

A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 [ 69 ] 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out